meliconi AMP 200 Indoor Signal Amplifier Instructions
- June 10, 2024
- meliconi
Table of Contents
meliconi AMP 200 Indoor Signal Amplifier
Thank you for choosing Meliconi The AMP 200 signal amplifier amplifies the signal more than 10 times. This allows it to be distributed to two separate devices and/or the use of very long cables without the signal deteriorating and its quality dropping.
Product Information
Amplificatore di segnale da interni AMP 200
The AMP 200 Indoor Signal Amplifier by Meliconi is a device that amplifies
the signal more than 10 times, allowing it to be distributed to two separate
devices and/or the use of very long cables without the signal deteriorating
and its quality dropping. It has an adjustable amplification beyond 20 dB and
a frequency range of 40 – 790 MHz.
Description of the Amplifier **
**
- 1 – Signal input
- 2 – Signal output 1
- 3 – Signal output 2
- 4 – Amplification adjustment
- 5 – Power LED
- 6 – ON/OFF switch
- 7 – Power plug
Safety Warnings
Before using the AMP 200 signal amplifier, read and follow all safety warnings in the user manual to avoid any damage to the device or injury to yourself.
- This product is for use indoors only; do not use outdoors.
- Keep away from water: the device must not be exposed to drips or splashes of water. Do not use in a damp environment.
- The product must not be exposed to sources of excessive heat, such as the rays of the sun, fire or the like.
- The amplifier must be easily accessible so that the device can be sepa-rated from the mains electricity supply.
- If you notice an anomaly regarding the amplifier, disconnect it from the mains electricity socket immediately.
- To avoid electric shocks, do not tamper with the device or try to repair it.
- This product is not a toy, and must not be left within the reach of children or pets.
- Before connecting the devices, disconnect them from the mains elec-
Product Technical Details
- 1 IN socket / 2 Out sockets 75 Ohms
- Adjustable amplification beyond 20 dB
- Power supply: 230V ac / 50 Hz 3W
- Frequency range 40 – 790 MHz
Package Contents
- Signal amplifier
- Instructions manual
Installation **
**
Follow the below steps to use the AMP 200 signal amplifier:
- Connect the input signal to the IN socket (1).
- Connect the OUT 1 socket (2) to the TV or to the decoder you want to feed the amplified signal to (figure A).
- If necessary, connect the OUT 2 socket (3) to a second device using a second cable (figure B).
- Insert the plug located on the back of the amplifier (7) in a mains socket.
- Set the ON/OFF switch (6) to the ON position. The blue LED on the front (5) lights up.
Improving Reception
If there is interference in the signal at input, the amplifier will also reproduce the interference and therefore the result will not be satisfactory. Connect the amplifier as close as possible to the signal source, so as to amplify a signal that is as clean as possible, and check that the connecting cables are correctly installed and of good quality. To improve signal quality, you can adjust the AMP 200 amplification le-vel by turning the central wheel until you achieve optimum amplification.
IMPORTANT: turn the wheel by resting one finger on the surface and carefully turning. Do not force the wheel with other tools such as a screwdriver. Turn the wheel clockwise to increase amplification, and anti- clockwise to reduce it. We recommend the use of high amplification if you do not get any signal without the amplifier. Select a medium amplification if you already receive some stations but want to add other, weaker sta-tions.
CAUTION: if there is interference in the signal at input, the amplifier will also reproduce the interference and therefore the result will not be satisfactory. We recommend that you connect the amplifier as close as possible to the signal source, so as to amplify a signal that is as clean as possible, and check that the connecting cables are correctly installed and of good quality.
The symbol of the crossed-out rubbish bin displayed on the device indicates that, at the end of its useful life, the product must be collected separately from other waste. The user must, therefore, take the device, at the end of its useful life, to suitable differentiated electrical and electronic waste collection centresor return it to the retailer when buying a new device of an equivalent type. The appropriate differentiated collection will ensure that discarded equipment can subsequently be recycled, treated and disposed of in environmentally-compatible way and will contribute to avoiding any possible negative effects on the environment and health by facilitating the recycling of the materials with which the device was made.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>