MITSUBISHI ELECTRIC PZ-43SMF-E Remote Controller Instruction Manual

MITSUBISHI ELECTRIC PZ-43SMF-E Remote Controller

This remote controller is to be connected to a Lossnay unit to allow that unit to be started and stopped, and to allow selection of the ventilation mode and of the fan speed. In order to ensure that remote controller and Lossnay unit can be operated both correctly and safety, it is important that this user’s manual be read fully and carefully. This remote controller may be installed without the assistance of special contractors. (however, safety and functionality will not be guaranteed in such a case)

Safety Precautions

WARNING
This symbol denotes what could lead to serious injury or death if the Lossnay remote controller is misused.

• Do not install the product by yourself.
• Contact your dealer or technical representative for installation. If it is installed improperly by
• Do not move or reinstall the product by yourself. representative.
• Do not discard the product by yourself.
• Contact your dealer if you dispose of the product.
• Never modify or repair by yourself. your dealer for repair.
• Check the installation condition.
• Ensure that the rated power is applied to the product.
• Stop the operation if any trouble occurs or error code is displayed.occurs (such as burnt odor), press the ON/OFF button to turn off the product, and contact your dealer.

CAUTION
This symbol denotes what could lead to personal injury or property damage if the Lossnay remote controller is misused.

• Do not place dangerous goods around the product.
• Do not install the product in a place where flammable gases may leak. If gas should leak or ac- cumulate around the product, fire or explosion could result.
• Do not use the product for special purposes.
• Malfunction could result.
• Do not apply insecticide or flammable sprays to the product.
• Do not place flammable spray near the product, or apply the spray to the product. Doing so could cause to catch fire or explosion.
• Do not use the product in special environments.
• The product could underperform or the parts could be damaged if it is used in locations subject to large quantities of oil (including machine oil), steam, or sulfide gas.
• Do not touch the button with a sharp object.
• Doing so could result in electric shock or breakdown.
• Do not pull or twist the transmission cable.
• Doing so could result in fire or breakdown.
• Do not wipe the product with a cloth containing benzene, thinner or others.
• Doing so could result in discoloration or breakdown. For heavy stain removal, wipe off the stain with a coth moistened with diluted neutral detergent, and wipe the product thoroughly with a dry cloth to remove the detergent.
• Do not wash the product with water.
• Doing so could result in electric shock or breakdown.
• Do not touch the button with wet hands.
• Doing so could result in electric shock or breakdown.
• Do not disassemble the product.
• Doing so could result in electric shock or breakdown.
• Use the product within the specified operating temperature and humidity range.
• Ensure that the product operates within the specified temperature and humidity range. Other wise, serious damage could result. Check the range of the operating temperature and humidity in the installation manual.

Component Names

1. [CENTRAL] Display Displayed during remote operation prohibited by centralized control unit, etc.

2. Ventilation mode Displayed the ventilation mode status. By-pass Automatic (HEAT EX./BY-PASS)

3. Power Display Displayed while the Lossnay remote controller is powered on.

4. [TIMER] Display Displayed on-timer or off-timer duration.

5. [NOT AVAILABLE] Display When a button is pressed for a function which the Lossnay unit cannot perform, display of the function.

6. [INTERLOCKED] Display Displayed when the Lossnay starts off by

7. Fan speed Display Displayed the selected fan speed.

8. [CHECK] Display Displayed together with the malfunctioning unit (3 digits) and an error code (4 digits).

9. [FILTER] Display Displayed when the accumulated operating maintenance.

10. [Ventilation mode] Button Used to select the ventilation mode among

11. [TIMER] Button Increasing 0:30 by pressing it once. Keep pressing the button for fast-forwarding.

12. [ON/OFF] Button Switch for start and stop.

13. Operation lamp On during operation. Flashes when a malfunction occurs.

14. [Fan Speed] Button Used to select the fan speed either “Low” or “High”
    Note : If this button is pressed when trying to switch the fan speed of a Lossnay unit which is not equipped with the fan speed adjustment, the fan speed display the unit’s fan speed does not change.

15. [FILTER] Button

Note:

• When power is restored after an outage or when the corresponding breaker for the distribution box is reset, all models will return to the condition before the supply of power was interrupted.
• When the back light is off, the first pressing any button (except “ON/OFF”° button) will not activate but make the back light on.

System Example

Mode of Use

Independent operation of the Lossnay unit

Timer setting:

When “CENTRAL” is indicated, timer function is not available.

Interlocked Operation with Indoor unit or external devices.
The Lossnay unit can be set up in such a way that it may be turned on and off by external devices such as air conditioners. In such case, the remote controller’s INTERLOCKED display will be turned on. Note that the selection of ventilation mode and of fan speed can be performed in the same way as for independent operation of the Lossnay unit.

Maintenance

| Relevant button| Revevant display items| Sequence
---|---|---|---
Filter reset (Clear of the total operation time)|

Double pressing

| | Press the “FILTER” button twice quickly, then “FILTER” indication will be disappeared.
Cleaning of the

|

the user’s manual which was provided with the Lossnay unit.

Care of the remote controller| To remove dirt from the remote controller’s display window, wipe with a cloth to which detergent has been applied, and then wipe with a dry cloth to remove any remaining detergent. Do not use the following solvents. (They will change the quality and the color.)

– Paint thinner, alcohol, benzene, gasoline, kerosene, spray cleaner, cleaning alkali, etc.

After-Sales Service

• If any of the following inspection numbers should be displayed on the remote controller, please contact the retail outlet from where this product was purchased for more information. 4000, 5101, 5102, 3602, 3600, 0900
• After-sales servicing of the remote controller unit should be ordered from the retail outlet from where this product was purchased.

Specifications

Weight| 0.1 kg (0.22 lbs)
Power supply| 12 VDC (suppled from Lossnay unit)
Power consumption| 0.3 W
Usage conditions| Temperature: 0 – 40 °C (32 – 104 °F)

Humidity: 30 – 90 %RH

Material| PC + ABS

2-7-3 Marunouchi, Chiyoda-ku, Tokyo, 100-8310 Japan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>