MITSUBISHI ELECTRIC PFFY-P20 Indoor Unit Air Conditioners Installation Guide
- May 15, 2024
- Mitsubishi Electric
Table of Contents
MITSUBISHI ELECTRIC PFFY-P20 Indoor Unit Air Conditioners
Specifications
Model| Volt / Hz| Max Voltage| Min Voltage| MCA (A)| IFM Production (kW)| FLA
(A)
---|---|---|---|---|---|---
PFFY-P20VEM-E| 220-240V / 50 Hz
220-240V / 60 Hz| 264 V| 198 V| 0.42| 0.096| 0.33
PFFY-P25VEM-E| 220-240V / 50 Hz
220-240V / 60 Hz| 264 V| 198 V| 0.49| 0.096| 0.39
PFFY-P32VEM-E| 220-240V / 50 Hz
220-240V / 60 Hz| 264 V| 198 V| 0.55| 0.096| 0.44
PFFY-P40VEM-E| 220-240V / 50 Hz
220-240V / 60 Hz| 264 V| 198 V| 0.65| 0.096| 0.52
PFFY-P50VEM-E| 220-240V / 50 Hz
220-240V / 60 Hz| 264 V| 198 V| 0.85| 0.096| 0.68
PFFY-P63VEM-E| 220-240V / 50 Hz
220-240V / 60 Hz| 264 V| 198 V| 0.82| 0.096| 0.65
Product Specifications
- Model: PFFY-P20,25,32,40,50,63VEM-E
- Power Supply: ~220-240V
- Installation Type: Indoor Unit
Product Usage Instructions
Installation Guidelines
For safe and correct use, please follow these installation guidelines:
- Read the installation manual thoroughly before proceeding with the installation.
- Ensure a secure and stable mounting surface on the floor, wall, or ceiling.
- Provide enough space to prevent blockage of the blowout air.
Mounting Instructions
Follow these steps for mounting the unit:
- For fixing on the floor:
- Measure the required space and secure the unit accordingly.
- For fixing on the wall:
- Ensure proper alignment and secure mounting on the wall.
Piping and Drainage Setup
Properly set up the refrigerant piping and drainage system:
- Connect the refrigerant piping (liquid and gas) as instructed.
- Install the drain hose with a downward slope of 1/100 or more to ensure proper drainage.
Electrical Connections
Make sure to connect the unit correctly:
- Use a ground-fault interrupter for safety.
- Connect to a local switch or wiring breaker for control.
Important Safety Information
This product is designed and intended for use in residential, commercial,
and light-industrial environments. Before installing and operating the unit,
thoroughly read and understand the installation manual to avoid accidents and
ensure proper use.
Contact Information
Please ensure that the contact address and telephone number are included in this manual before providing it to the customer.
MITSUBISHI ELECTRIC CORPORATION
HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
Frequently Asked Questions (FAQ)
What should I do if the air-conditioner unit is not cooling effectively?
Check the filters for dirt or blockages. Clean or replace them if needed. Ensure proper airflow around the unit.
How often should I service the air-conditioner?
It is recommended to service the air-conditioner unit annually to maintain optimal performance.
What environments are suitable for the use of this air-conditioner unit?
This product is intended for use in residential, commercial, and light- industrial environments.
What is the voltage range for the PFFY-P20VEM-E model?
The voltage range is 220-240V for both 50Hz and 60Hz frequencies, with a maximum voltage of 264V and a minimum voltage of 198V.
What are the MCA and FLA ratings for the PFFY-P25VEM-E model?
The MCA (Maximum Circuit Ampere) is 0.49A, and the FLA (Full Load Ampere) is 0.39A.
Is there a reference for other models not listed in the specifications?
Yes, for models not listed, refer to the Data book for detailed specifications.
Where can I find the contact information for customer support?
Contact information should be provided in the manual before it is handed to the customer. If not available, contact the head office at Tokyo Bldg., 2-7-3, Marunouchi, Chiyoda-ku, Tokyo 100-8310, Japan.