LOCKER DOWN LD2030EX Extreme Console Safe Instruction Manual

June 3, 2024
LOCKER DOWN

LOCKER DOWN logo Security Products
INSTALLATION INSTRUCTIONS
LD2030/LD2030EX
[2016 to 2022 Honda Ridgeline, Passport, and Pilot] LOCKER DOWN
LD2030EX Extreme Console Safe

LD2030EX Extreme Console Safe

  1. For any combination style lock, it is a good idea to set the combination before installing the safe. We recommend that the combination be set with the DOOR OPEN in  order to test the lock combination effectively without locking yourself out.

  2. Clear out the contents of the center console for now, including the factory mat at the bottom of the console.

  3. Move the sliding tray towards the center of the console, then firmly pull upwards to remove it.

  4. Slide the two tray holders to the rear of the console.

  5. Remove the 2 bolts at the bottom of the console compartment.

  6. Remove the neoprene padding from the inside of the safe for now.

  7. Place the BOTTOM portion of the safe into the console
    a. To ensure that the safe is properly seated, make sure that the factory holes in the bottom of the safe LINE UP with the factory bolt holes from Step

  8. Place the LOCK’ER DOWN PROVIDED 10mm bolts in the factory bolt holes from Step 8.

  9. Insert the lid assembly from the front so that the rear of the assembly is inside the console compartment, then lift on the rear and adjust the front end of the lid assembly  so that the 2 front PIM studs line up with the holes on the top lip of the bottom piece. Then push down on the rear of the lid assembly to insert the PIM studs  through the rear holes on the top lip of the lower assembly.
    a. Use the 4 LOCK’ER DOWN PROVIDED acorn nuts along with your 8mm fastening device to secure the top assembly to the bottom assembly.

  10. Tighten the bolts and the acorn nuts, DO NOT OVER TIGHTEN, THIS COULD DAMAGE THE CONSOLE.

  11. Re-insert the padding that was removed from the safe before installation.

  12. Re-attach the tray to the sliding rails from Step 3.

  13. Enjoy your purchase!

Tools Needed:
IMPACT DRILL or SOCKET WRENCH
10mm Socket bit and 8mm Socket Bit
Contents Included: 2 11mm Bolts.
4 Acorn Nuts

Documents / Resources

| LOCKER DOWN LD2030EX Extreme Console Safe [pdf] Instruction Manual
LD2030, LD2030EX, Extreme Console Safe, LD2030EX Extreme Console Safe
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

LOCKER DOWN User Manuals

Related Manuals