LOCKER DOWN LD2058 Under Front Bench Seat Instruction Manual
- June 3, 2024
- LOCKER DOWN
Table of Contents
LOCKER DOWN LD2058 Under Front Bench Seat
INSTALLATION INSTRUCTIONS
- For any combination style lock, it is a good idea to set the combination before installing the safe. We recommend that the combination be set with the DOOR OPEN in order to test the lock combination effectively without locking yourself out.
- Clear out the contents of the center console for now, including the factory mat at the bottom of the console.
- Remove the 4 10mm bolts from inside the console compartment.
- Remove the neoprene padding from the bottom of the inside of the safe.
- Set the safe into the center console.
- Make sure that the 4 slots line up with the four factory bolt locations (these locations being where you removed bolts from in STEP 3)
- Using your 10mm fastening device, insert the 4 LOCK’ER DOWN PROVIDED 10MM BOLTS into the factory holes at the bottom of the safe (these holes should line up with the factory screw holes at the bottom of the compartment)
- Tighten the bolts, DO NOT OVER TIGHTEN, THIS COULD DAMAGE THE CONSOLE.
- Re-insert the padding that was removed from the safe before installation.
- Enjoy your purchase!
Tools Needed
- SOCKET WRENCH
- 10mm Socket bit
Contents Included
- 4 10mm Bolts.
Read User Manual Online (PDF format)
Loading......