LOCKER DOWN LD2005/LD2005EX Down Safes Locker Instruction Manual
- June 3, 2024
- LOCKER DOWN
Table of Contents
Security Products
INSTALLATION INSTRUCTIONS
LD2005/LD2005EX
[2005-2008 Ford F150 and Lincoln LT with Full Floor Console]
LD2005/LD2005EX Down Safes Locker
-
For any combination style lock, it is a good idea to set the combination before installing the safe. We recommend that the combination be set with the DOOR OPEN in order to test the lock combination effectively without locking yourself out.
-
Clear out the contents of the center console for now, including the factory mat at the bottom of the console.
-
Remove the 4 factory screws from the bottom of the console compartment using a screwdriver or an impact drill with a Phillips attachment (hold on to these as they are needed for the installment of the safe)
-
Set the safe into the center console.
a. To ensure that the safe is set in the compartment properly, make sure that the lock is on the forward end towards the dash, and that the 4 slots at the bottom of the safe line up with the factory screw holes from STEP 3 -
Using your DRILL or SCREWDRIVER, re-insert the screws that were kept from STEP 3 into each of the slots from STEP 4.
-
Tighten the bolts, DO NOT OVER TIGHTEN, THIS COULD DAMAGE THE CONSOLE.
-
Enjoy your purchase!
Tools Needed:
- IMPACT DRILL or PHILLIPS HEAD SCREWDRIVER