HYTRONIK HBTD8200T Bluetooth Receiver Node Instruction Manual

June 3, 2024
HYTRONIK

HYTRONIK Logo Installation and Instruction Manual
Bluetooth Receiver Node – 150VA Trailing Edge Version
HBTD8200T/F

Technical Specifications

Product type| HYTRONIK HBTD8200T Bluetooth Receiver Node
-IconReceiver Node
---|---
Mains voltage| 230VAC  50Hz
  Load| 1-150VA (Capacitive) / 1-150W (Resistive)
Stand-by power| <0.5W
Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| 4 dBm
Range (Typical)| 10 ~ 30m
Protocol| HYTRONIK HBTD8200T Bluetooth Receiver Node
-Icon5.0  SIG Mesh
Operation temperature| Ta: -20 ℃ ~ +45 ℃
Case temperature (Max.)| Tc: +80 ℃
Storage temperature| -20°C ~ +60°C
Max. relative humidity| 20 ~ 90%
IP rating| IP20
Impulse withstand voltage| 2.5KV
Duty type| PTI material group IIIa
Insulation material| S1
Glow wire| level 3, 850°C
Protection| Built-in protection provide
Insulation| Class II Pollution degree 2
EMC standard (EMC)| EN55015, EN61547, EN61000-3-2, EN61000-3-3
Safety standard (LVD)| IEC 61058-1, EN 61058-1, IEC 61058-1-2
EN 61058-1-2, AS/NZS 61058.1
Radio Equipment (RED)| EN300 328, EN301489-1, EN301489-17, EN62479

Download the App

Free App for set-up and commissioning

HYTRONIK HBTD8200T Bluetooth Receiver Node - Fig11

| https://apps.apple.com/cn/app/koolmesh/id1483721878
---|---
| https://play.google.com/store/apps/details?id=com.koolmesh.sig
| https://apps.apple.com/cn/app/koolmesh/id1570378349

HYTRONIK HBTD8200T Bluetooth Receiver Node - QR 3

http://www.hytronik.com

Dimming Interface Operation Notes

Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.

Switch Function Action Descriptions
Push switch Short press (<1 second) * Short press has to be longer than 0.1s,
or it will be invalid. – Turn on/off – Recall a scene

– Turn on only – Exit manual mode
– Turn off only – Do nothing
Double push| – Turn on only – Exit manual mode
– Turn off only – Do nothing
– Recall a scene
Long press (1 second)| – Dimming
– Colour tuning
– Do nothing
Simulate sensor| /| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Installation

Warnings:

  1. Installation must be carried out by a qualified engineer in accordance with local regulations.
  2. Disconnect power supply before installing.
  3. Ensure environmental conditions are suitable for electronic equipment.

HYTRONIK HBTD8200T Bluetooth Receiver Node - Fig

Additional Information / Documents

  1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download->knowledge->Introduction of App Scenes and Product Functions

  2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to
    www.hytronik.com/download->knowledge->BluetoothProducts- Precautions for Product Installation and Operation

  3. Data sheet is subject to change without notice. Please always refer to the most recent release on
    www.hytronik.com/products/bluetoothtechnology->BluetoothSensor->Receiver Nodes

  4. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download->knowledge->Hytronik Standard Guarantee Policy

HYTRONIK Logo WWW.HYTRONIK.COM
HBTD8200T/F-20200403-A2

Documents / Resources

| HYTRONIK HBTD8200T Bluetooth Receiver Node [pdf] Instruction Manual
HBTD8200T Bluetooth Receiver Node, HBTD8200T, Bluetooth Receiver Node, Receiver Node, Node
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HYTRONIK User Manuals

Related Manuals