Sharpal 140H Soak Free Whetstone Set User Manual
- September 23, 2024
- SHARPAL
Table of Contents
Sharpal 140H Soak Free Whetstone Set
Specifications
- Model: 140H
- Whetstone Grits: 1000 Grit (Medium), 6000 Grit (High)
- Warranty: 3 years from the date of purchase
- Usage: Knife sharpening
Product Usage Instructions
Choosing the Sharpening Angle
- Determine the appropriate sharpening angle based on the type of knife you are working with.
- Consult with the manufacturer or a knowledgeable knife shop for the exact angle recommendation.
Choosing Whetstone Grit
- Select the appropriate grit of whetstone based on the condition of your blade.
- Use 1000 Grit for setting a new edge quickly and 6000 Grit for polishing and refining the blade edge.
Sharpening Process
- Place the whetstone on the non-slip case lid & sharpening stand.
- Begin sharpening both sides of your blade, starting with the appropriate grit.
- Continue sharpening until you feel the blade is sharp, switching to a higher grit if necessary.
Safety Precautions
- Wear anti-cut gloves when sharpening with the product.
- Watch the demo video on YouTube or scan the QR code for visual guidance.
Angle Pyramid® Sharpening Angle Guide
You need to know what angle works best for the type of knife that you’re
working with. Doing this by feel and without a sharpening guide is extremely
difficult to get right with little experience and will most likely ruin your
blade. This sharpening angle guide is integrated with 4 angles-14°, 17°, 20°,
25° which help to set the desired angle at the beginning.
Common Sharpening Angles:
- Pocket Knives 20 ° per side
- Hunting Knives 25° per side
- Fillet Knives 17° per side
- Tactical Knives 25° per side
- Euro/American Kitchen Knives 20 ° per side
- Asian Kitchen Knives 14 or 17 ° per side
Note: Consult with the manufacturer of your knife or inquire at a knowledgeable knife shop to determine what angle is exactly appropriate for your knife.
How to Choose Whetstone Grit
- Medium Grit Whetstone: 1000 Grit Perfect for setting a new edge quickly
- High Grit Finishing Whetstone: 6000 Grit Ideal for polishing the blade edge, making the edge sharper and smoother by eliminating roughness and burrs
Whetstone Sharpening Instructions using our Angle Pyramid® Sharpening Angle Guide
- Select the appropriate grit of whetstone based on the condition of your blade. Place the whetstone on the non-slipcase lid & sharpening stand while sharpening.
- Spray a small amount of water on the surface of the whetstone, spreading it evenly across the entire surface.
- Place the Angle Pyramid® sharpening angle guide on one end of the stone. Choose the correct angle according to your knife or tool. Lean the blade on the desired angle of Angle Pyramid® sharpening angle guide in a perpendicular slightly angled position to the stone. (See Fig. 1)
- PUSH the blade AWAY from you like you are trying to carve a thin slice off the top of the stone. Push the knife bladeacross the stone as you push to sharpen the cutting edge all the way out to the tip of the blade (See Fig. 2). Repeat thisPUSHING stroke several times. Remember to hold the angle as you push and try to maintain a consistent sharpeningangle with each stroke. This is the key to obtaining the sharpest cutting edge. Reminder that the Angle guide isstationary and does not move with the blade.
- Next, place the Angle Pyramid® sharpening angle guide on the other end of the stone to sharpen the other side ofyour blade. Again, lean your blade on the angle guide to get the correct sharpening angle (See Fig. 3). PULLthe bladeTOWARD you like you are trying to carve a thin slice off the top of the stone. As you pull the blade down the length ofthe stone, pull the blade across the stone to sharpen the entire cutting edge. Let the tip come off the edge of the stone(See Fig. 4). Repeat this PULLING stroke the same number of times as you did on the opposite side of your blade andtry to maintain a consistent sharpening angle with each stroke.
- Continue sharpening both sides of your blade until you feel that your blade is truly sharp. If you started with the low grit side, move to the higher grit side, repeating the sharpening process.
Maintenance of Whetstone
- Thoroughly clean the whetstone surface with water after every use, and use a scrub sponge to clean the surface after several uses. This will remove metal particles and debris that stick onto the whetstone during the sharpening process. Allow it to dry in a well-ventilated area before storing it to avoid mold.
- When the surface of the whetstone becomes uneven after a period of use, you can utilize the SHARPAL 145H DiamondLapping Plate (sold separately) to flatten the whetstone.
CAUTION: Recommended to wear anti-cut gloves when sharpening a blade with this product.
Watch its demo video on YouTube: bit.ly/140Hvideo Or scan the QR code
Each SHARPAL product is warranted to be free from defects in material and workmanship for 3 years from the date of purchase under normal wear and tear, except for damage caused by misuse or alteration. THIS WARRANTY APPLIES ONLY TO NON-INDUSTRIAL OR NON-COMMERCIAL USE. If you want to make a warranty claim, please contact us through the SHARPAL website or send an email directly to warranty@sharpal.com
FAQ
- Q: How long is the warranty for the product?
- A: The product is warranted for 3 years from the date of purchase under normal wear and tear conditions, excluding damage caused by misuse or alteration.
- Q: Where can I make a warranty claim?
- A: To make a warranty claim, contact SHARPAL through their website or send an email to warranty@sharpal.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>