HALYTUS HK-HF01 HOOKEE Next Gen Smart Home Gym User Manual

HALYTUS HK-HF01 HOOKEE Next Gen Smart Home Gym

Product Information

The Halytus HooKee is the world’s first portable fitness device with adjustable resistance. It allows you to perform full-bodyworkouts with over 100 exercises using the provided accessories. The device offers up to 40kg of adjustable resistance and provides thorough guidance and a personal training- like experience when connected to your mobile phone.

What’s in the Box

• Charging port
• Mode button
• Mode indicator
• Resistance knob
• Reset button
• Status indicator
• 100lbs H-board
• Long Bar
• Hookee
• USB type-C cable
• Resistance level indicator
• H-Con

Specification

A. Preparation before use:

1. A smartphone with Android OS running on it.
2. Download the file provided and install it.

B. Turn on the device:

Press and hold the reset button for 3 seconds to turn on the device. When successfully turned on, the LED on the button will flash blue and red, then turn green.

C. Connect the device to the app:

1. Turn on the Bluetooth function on your phone.
2. Open the Halytus app and follow the instructions to connect the device. Note: You can also operate the device without connecting to the app.

D. Install the handles or the board:

The handles are designed for better grasp during different exercises. Follow the instructions on the app or below to choose the right handles.

• Long bar: Works similarly to I-handles and is mainly used for double-sided upper/lower body training.
• H board: Used to fix the device to the ground. It is suggested to use the board for most of the training.

E. Interact with Halytus app using H-Con:

The H-Con can be installed on the handle to control the app. Single press to select OK, pause, or play. Press and hold for 1 second to return to the previous content. Double-press to skip the current content. Note: The H-Con needs to be put back in its original position after each workout.

F. Resistance adjusting:

You can adjust the resistance according to your exercise habits. The maximum resistance is 100 lbs.

G. Change the resistance direction:

• Inward resistance
• Outward resistance
• Bi-directional resistance
• Resistance free

H. Check the Bluetooth connection status:

Single press the reset button. If the device is connected to the Halytus app, the status LED will blink 3 times in blue. If the device is disconnected, the status LED will blink 3 times in red.

I. Device charging:

Connect the USB type-C cable to the charging port of the device for charging.

J. Device update:

Upgrade the firmware version by following the instructions provided in the release notes.

Button Operation Definitions:

• Single press: Perform the specified action
• Double press: Skip the current content
• Triple press: Switch modes

INTRODUCTION

Introducing HooKee, the world’s very first portable fitness device with up to 40kg adjustable resistance. You can perform full-body workouts with over 100 exercise with the accessories we provide anywhere, anytime. HooKee provides you thorough guidance and PT-like training experience when connected to your mobile phone. Please read through this user manual to unlock your new training experience

What is in the box

SPECIFICATION

• Dimensions: 145.7 × 96 × 46 mm
• Maximum resistance: 100 lbs
• Wireless Protocol: Bluetooth 5.0
• Model: HK-HF01(HK – Hookee, HF01 – the first product powered by Hydroflex)
• Battery Type: Lithium battery (not replaceable)
• Rated Voltage: 5 V
• Rated Power Input: 10 W
• Operating Humidity: 0~95% RH, no condensation

OVERVIEW

PREPARATION BEFORE USE

1. A smartphone with Android OS running on it.
2. Download the file we send you and install it.

TURN ON THE DEVICE

Press and hold the reset button for 3 seconds to turn on the device. When the device is successfully turned on, the LED on the button will flash in blue and red and then turn into green.

CONNECT THE DEVICE TO THE APP

• Turn on Bluetooth function on your phone
• Open the Halytus app, follow the instructions and connect the device.
  Note : you can also operate the device without connecting to the Halytus app.

WARNING

1. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be done by children without supervision.
4. WARNING: the device shall be disconnected from its power source during cleaning, maintenance, and replacement parts.
5. It must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
6. WARNING: Important safety instructions. The safety of people needs to follow these instructions. Save these instructions.
7. Do not allow children to play with fixed controls.
8. Frequently examine the installation for imbalance and signs of wear or damage to cable springs and fixings. Do not use it if repair or adjustment is necessary.
9. Do not operate when maintenance, such as window cleaning, is being carried out in the vicinity.
10. WARNING: Important safety instructions. Follow all instructions since incorrect installation can lead to severe injury.
11. Before installing the device, remove any unnecessary cords or components and disable any equipment not needed for powered operation.
12. The characteristics of the driven part must be compatible with the rated load and rated operating time.
13. This appliance contains non-replaceable batteries.
14. Fixed controls have to be visible after installation.
15. The mass and the dimension of the curtain to be driven shall be compatible with the rated torque and rated operating time

INSTALL THE HANDLES OR THE BOARD

The handles are designed for better grasp when conducting different exercises, you can follow the instructions below or on the App to choose the right handles

Long bar
Long bar works similarly with I-handles, it is mainly used for double-sided upper/lower body training.

H board
The board is used to fix the device to the ground. It is suggested to use the board for most of the training.

INTERACT WITH HALYTUS APP USING H-CON

• The h-con can be installed on the handle so that you can use it to control the app.
• Single press to select “OK”, “pause” or “play”.
• Press and hold for 1 second to return to the previous content.
• Double-press to skip the current content.
• Note: T he h-con need to be put back to its original position each time when you finish the workout.

RESISTANCE ADJUSTING

• You can adjust the resistance according to your own exercise habits.
• The maximum resistance is 100lbs.

CHANGE THE RESISTANCE DIRECTION

There are Three resistance modes that you can choose:

• Inward resistance
• Outward resistance
• Bi-directional resistance
• Resistance free

You can use the button on the panel or the H-Con to switch modes:

• Single press the resistance setting button on the right of the panel to switch from the modes above.
• Triple press the H-Con to switch modes

CHECK THE BLUETOOTH CONNECTION STATUS

Single press the reset button, if the device is connected to Halytus App, the status LED will blink 3 times in blue.
If the device is disconnected, the status LED willblink 3 times in red

DEVICE CHARGING

You can charge the device using normal phone chargers with the maximum power No more than 5V-2A.

DEVICE UPDATE

You can use Halytus app to upgrade the firmware of the device.
The operation routine is as below: Me -> Click on the device card -> Firmware Version -> Upgrade.

BUTTON OPERATION DEFINITIONS

Reset button

|

Single press

| Check Bluetooth connection status. If the device is connected to the phone, the status LED will flash in blue for 3 times.

If the device is disconnected, the status LED will flash in red for 3 times.

P3 rseescsoanndds hold for|

To turn on/turn off the device

Mode Button

|

Single press

| Change the resistance mode. The changing order is as below: Inward resistance, Outward resistance, bidirectional resistance, resistance free.
RKensoibstance| Roll clockwise| Increase the resistance
Roll anticlockwise| Decrease the resistance

LED DESCRIPTIONS

Status LED

| Ftwlaoshceycsliensblue and red for| The device is turned on succesfully
Flashes in blue for 3 times| The device is connected to Halytus App
Flashes in red for 3 times| TAhpep device is disconnected from Halytus
Flashes in red for 5 times| Tnheeddsetvoicbeeischuencdkeerdabnormal status and
Flashes in red| The battery level is lower than 15%

RMeosdisetaLnEcDe

| Light is on for upper pard| Outward resistance
Light is on for lower part| Inward resistance
| Bidirectional resistance
Light is on for both parts| Resistance free

BUZZER EXPLANATIONS

Patterns

|

Description

---|---

3 short beeps

|

Bluetooth is connected successfully

3 long beeps

|

Low battery

1 long beep

|

Abnormal status

RF exposure statement

This equipment complies with the FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC WARNING
This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>