RENISHAW SFM-C3 Surface Finish Probe Module Installation Guide
- June 4, 2024
- RENISHAW
Table of Contents
RENISHAW SFM-C3 Surface Finish Probe Module
Surface finish probe module
Enhanced access and inspection capability for integrated surface finish
measurement
The SFP2 system consists of a probe and a range of SFM modules which have been
designed to suit the demands of specific parts and features encountered in a
precision manufacturing environment. The probe and modules can be
automatically interchanged with all other REVO® probe options, providing the
flexibility to easily select the optimum tool to inspect a wide range of
features.
Each SFM module is its own miniature measuring device, incorporating
Renishaw’s proprietary encoder system to transduce the motion of the stylus
tip.
Features
The C-series of modules have the ability to locate the stylus in small
diameter bores. The skid and stylus are inline so that both travel along the
axis of the bore.
The SFM-C3 is a replacement for SFM-C2, offering more stylus range and
increased robustness without any degradation in performance.
Typical applications
Automotive engine valve guideways.
Specification
| Diamond tip radius (µm) | 2 or 5 |
|---|---|
| Surface finish measurement range (µm) | 2 µm modules |
| 5 µm modules | 6.3 to 0.10 Ra |
| **Typical surface finish accuracy (of nominal Ra) *** | ±(10% + 35 nm) |
| Skid / stylus arrangement | In-line (stylus lagging skid) |
| Skid material | DLC coated stainless steel |
| Nominal stylus tip protrusion beyond skid (mm) | 0.5 |
| Minimum feature access (mm) | Ø5 × 50 |
| Skid length / radius (mm) | 4.4 / 40 |
| Skid width / radius (mm) | 3.3 / 2 |
| Skid contact force (N) | 0.15 |
| Stylus contact force (N) | 0.003 |
| SFM / SFH knuckle adjustment range | ±90° |
| Weight (g) | 12 |
| Resolution (nm) | 1 |
| Measurement speed (mm/s) | Up to 1 |
| Stylus holder compatibility | SFH-1 only |
| Lateral scanning capability | No |
Accuracy values are dependent upon a number of system variables. These include the machine size and configuration, scan orientation, condition of stylus tip, part fixturing system and environmental noise.
All dimensions in mm
www.renishaw.com/SFP2
+44 (0) 1453 524524
uk@renishaw.com
© 2021 Renishaw plc. All rights reserved. RENISHAW® and the probe symbol are
registered trademarks of Renishaw plc.
Renishaw product names, designations and the mark ‘apply innovation’ are
trademarks of Renishaw plc or its subsidiaries.
Other brands, products or company names are trademarks of their respective
owners.
Renishaw plc. Registered in England and Wales. Company no: 1106260. Registered
office: New Mills, Wotton-under-Edge, Glos, GL12 8JR, UK.
WHILE CONSIDERABLE EFFORT WAS MADE TO VERIFY THE ACCURACY OF THIS DOCUMENT AT
PUBLICATION, ALL WARRANTIES, CONDITIONS, REPRESENTATIONS AND LIABILITY,
HOWSOEVER ARISING, ARE EXCLUDED TO THE EXTENT PERMITTED BY LAW.
Part no.: H-1000-2129-02-A
Issued: 10.2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>