RENISHAW TP7M Probe and Stylus Kit User Guide
- May 15, 2024
- RENISHAW
Table of Contents
RENISHAW TP7M Probe and Stylus Kit
SPECIFICATION
Stylus selection
The TP7M is a high-accuracy probe specifically designed to maintain a high
level of accuracy and reliability across a wide spectrum of applications. For
best performance, the guidelines given should be followed:
Do not:
-
use more than 50 mm of M3 or M2 style, or accessories
-
use M2 style within 30 mm of the probe mounting face or probe axis
-
use the M4 / M2 (SA5) adaptor, use the M4 / M3 and the M3 / M2 adaptors instead
-
do not use stylus knuckle joints
Do: -
use the longest possible M4 stylus extensions or M4 / M3 adaptor extensions to achieve a required stylus length
-
follow the guidelines in the TP7M user’s guide (Renishaw part number H-1000-5010) for stylus selection
-
use M3 and M4 styles wherever possible to maximize the stiffness of the stylus configuration, however, the M2 style can be used if necessary for workpiece access
-
tighten up style adequately using the stylus tools provided
-
ensure the stylus ball is kept clean at all times by using distilled water or a proprietary cleaning fluid
-
+44 (0) 1453 524524
© 1990-2023 Renishaw plc. All rights reserved. This document may not be copied or reproduced in whole or in part, or transferred to any other media or language by any means, without the prior written permission of Renishaw.
RENISHAW® and the probe symbol are registered trademarks of Renishaw plc.
Renishaw product names, designations and the mark ‘apply innovation’ are
trademarks of Renishaw plc or its subsidiaries. Other brand, product or
company names are trademarks of their respective owners. WHILE CONSIDERABLE
EFFORT WAS MADE TO VERIFY THE ACCURACY OF THIS DOCUMENT AT PUBLICATION, ALL
WARRANTIES, CONDITIONS, REPRESENTATIONS, AND LIABILITY, HOWSOEVER ARISING, ARE
EXCLUDED TO THE EXTENT PERMITTED BY LAW. RENISHAW RESERVES THE RIGHT TO MAKE
CHANGES TO THIS DOCUMENT AND TO THE EQUIPMENT, AND/OR SOFTWARE AND THE
SPECIFICATION DESCRIBED HEREIN WITHOUT OBLIGATION TO PROVIDE NOTICE OF SUCH
CHANGES.
Renishaw plc. Registered in England and Wales.
- Company no : 1106260.
- Registered office : New Mills, Wotton-under-Edge, Glos, GL12 8JR, UK.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>