GKU D100 Dual Dash Camera User Manual

Dual Dash Camera
User Manual

Warranty

Thank you for choosing the GKU dash cam,
If your dash camera doesn’t work well, or if you have any doubts. Please do not hesitate to contact us. There is no perfect product, however, we will always do our best to provide perfect customer service to you. If you find any mistakes or- have any suggestions, please let us know. We appreciate your time and support.
If something we can not solve well, we are always happy to provide a full, free refund. We just want our customers to be safe and happy to use the GKU dashcam.
Our customer service team e-mail: [email protected]. We will provide 24-hour service for you.
Kindest regards, GKU Customer Service

https://qrs.ly/qbdim5v

What’s you may need (Not included)
They are not included in the box, but you can claim one of them.

Note: Please choose an option you prefer, scan its QR codes to claim

Product Description

Packsgge Contents

Camera Overview

1. Power Port
2. Mounting Groove
3. Rear Camera Interface
4. OK Button
5. Mode
6. Lock Button
7. Power On/Off| 8. SD Card Slot
9. Up
10. Menu
11. Down
12. Tapped Hole
13. 3M Mount
---|---

Installation

1. Installation of Front Camera
Insert a micro SD card into the card slot, be aware of the orientation shown in the picture below. To remove the micro SD card, gently put its top edge inward until it clicks, it will pop up and can be removed.

Tips:

• The SD card must be formatted before use.
• For a 32GB SD Card, please format it with FAT32 on PC before use.
• It’s recommended to format SD card regularly

LED Indicator
Solid red: Charging battery
Blue light on: Camera is on
Blue light flashing: Camera is recording

Attach Mount to Camera
Align the mount with the mounting groove Located at the top of the camera, slot into the groove and slide it to the left.

Remove Protective Films
Before installing the camera onto the windshield, remove the protective film from the camera lens.Connect the car charger to the car cigarette lighter port.

2. Installation of Rear Camera
Please follow the instruction below, install the rear camera in the correct position. We recommend professional installation for you.

Reversing Assistant
X For the reversing guide feature, install the rear camera in position 2, then connect the red trigger cable of rear camera extension cable to the positive lead of the car reversing lamp. Extension Cable for Rear Cam
https://qrs.ly/x3djj2e

Tips :

1. Please clean the position to ensure the adhesive quality before install the rear camera.
2. Please clean the rear windshield regularly to ensure the video quality if choose the position 1.
3. If choose the position 2, you can install the rear camera with the included adhesive sticker or screws.

Notes : The device is fastened with a very strong acrylic foam tape , Which resists changing conditions and UV radiation. It is not recommend-ed to remove it and to re-fasten it. However, if it is necessary to remove the camera holder and to re-fasten it, a new tape strip should be used.

Product Operation

1. Camera Startup &Recording

Power On/Off

1. Automatic: When you start the engine, the camera will turn on and begin recording automatically. When you turn off the engine or unplug the charging cable from the power adapter, the camera will stop recording and turn off.
2. Manually: Long press power button to power on or off the camera.

Emergency Recording

1. Automatic emergency recording
   When the G-sensor is activated by a collision, the current footage will be locked automatically to avoid being overwritten by loop recording.

2. Manual emergency recording
   Pressing the lock button during a recording will lock the current file being recorded. Once locked, the file will not be overwritten by the loop recording feature.

Note: Collision sensing feature can be adjusted in settings under the “G-sensor” option.

2. Video Playback and Deletion
Playback on Camera
Under standby mode (not recording), press the right second button to enter the video folder. Playback on PC
You can either use the USB cable to connect the camera to the PC or use a card reader to read Micro SD card data on the PC.
Delete a Video
After entering the playback screen, long press the menu button on the far right to enter the delete option.

Product Specifications

1280 x 720P 30fps
Working Current| 5V/1A
Seamless Video| Yes
Operating Temperature| -20°F-150°F
Motion Detection| Yes
F/No.| 1.8
Screen saver| 3min/5min/10min

Hardwire Kit for Dash Camera
https://qrs.ly/vzdjj2i

Q&A

Q: Why dash cam saying SD Card full and it turn off randomly?

– A: When the dash cam Micro SD card is full, the dash cam will randomly shuts down, reminding you to format the card.We suggest to set: 1. G-sensor – “LOW” 2.Turn off motion detection and parking mode 3. Format the sd card regularly.

Q: The camera automatically shuts down after one-minute-re-cording. What should I do?

– A: Due to the screen saver function, it will turn off the screen one minute later. But the camera is recording. The light flashes to indicate that the camera is recording. This function can be turned off.

Q: Should the dash cam always be on charging to keep recording?

– A: The dash cam needs to be charged all the time. The built-in battery can not sustain a long time, and it needs to be connected to the car charger. When using the parking monitoring function, a hard-wired kit is required to ensure continuous power supply (The hardwire kit is not included in the package.)

|
---|---
https://qrs.ly/iodi8ac| https://wa.me/qr/SI3O7FM3NLYJF1
| https://line.me/ti/p/ZEqv4YK3s1

CUSTOMER SUPPORT

Documents / Resources

| GKU D100 Dual Dash Camera [pdf] User Manual
D100 Dual Dash Camera, D100, Dual Dash Camera, D100 Dash Camera, Dash Camera, D100 Camera, Camera
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>