SEALEY APICCOMBO2 Industrial Cabinet 2 Drawer Instruction Manual

SEALEY APICCOMBO2 Industrial Cabinet 2 Drawer

SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.

• Locate cabinet in a suitable work area.
• Keep the work area clean, uncluttered and ensure there is adequate lighting.

WARNING! Use cabinet on level and solid ground, preferably concrete.

• Keep the cabinet clean and tidy in accordance with good workshop practice.
• Keep children and unauthorised persons away from the work area.
•  DO NOT use the cabinet for any purpose other than that for which it is designed.
•  DO NOT use the cabinet outdoors.
• DO NOT place the cabinet in a damp or wet location or an area where there is condensation.
• DO NOT clean the cabinet with any solvents which may damage the surfaces or the protective coating.
• DO NOT move the cabinet when there are items placed inside.
• DO NOT overload the cabinet.

INTRODUCTION

Four variants of industrial quality, double door, free standing cabinets with a range of internal shelving and drawer options. Easily assembled with minimal tool use. Durable scuff resistant, adjustable shelving each with a weight limit of 150kg. Drawers run on heavy duty ball bearing
slides each with a weight limit of 75kg, fitted with safety locking catches preventing inadvertant opening. Reinforced steel doors with zinc plated locking bars, provide 3 point locking. Supplied with two coded keys. Ideal for home, office, garage or workshop use.

SPECIFICATION

• Model no: ……………………………….APICCOMBO2
• Width x Depth x Height
• Overall size: …………………….900 x 450 x 1800mm
• Medium drawer (x1): …………..775 x 330 x 100mm
• Large drawer (x1): ………………775 x 330 x 200mm
• Internal cabinet overall size: .850 x 420 x 1710mm

CABINET CONTENTS

Unpack the contents of the boxes and check against the parts lists/diagrams. If there are any parts missing, contact your local Sealey dealer.

Part No. :  Part Name : No. of

• A1 Rear Panel 1
• A2 Rear Panel 1
• B1 Left Side Panel 1
• B2 Right Side Panel 1
• C1 Left Door 1
• C2 Right Door 1
• D Top 1
• E Bottom 1
• F Inner Face Plate 1
• G Outer Face Plate 1
• J Plastic Stop 4
• K Locking Pin Locator 2
• L Hinge Pin Locator 4
• M Screw 18
• N Hinge Pin 4

CABINET ASSEMBLY

Assemble the cabinet following the numbered sequence below, referencing the parts list and diagram overleaf. Use a trestle table or a workbench if required.

DRAWER CONTENTS

Part No. : Part Name : No. of:

• A or B APICD100/APICD200 1
• C or D APICD100/200 Dividers 10
• E Screw 16
• F Bracket 4
• G Sliders 2

DRAWER ASSEMBLY

SHELVES CONTENTS/ASSEMBLY

Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable) into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>