CLI MATE CLI-AP10-W Air Purification System Owner’s Manual

June 13, 2024
CLI MATE

CLI MATE CLI-AP10-W Air Purification System

Congratulations on your purchase of a Cli~Mate Air Purifi cation System. This Air Purifi cation System removes indoor air pollutants and odors from the air you breathe, creating a healthier home environment.

Note: Please read through the instructions carefully before using or installing the product and ensure that the manual is kept in a safe place for future reference. The system must be properly installed and located in accordance with the installation instructions before it is used. During the setup of this product if you have any questions/comments/issues DO NOT RETURN TO STORE. FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT, CALL 1300 764 325.

SAFETY PRECAUTIONS

Read all instructions carefully.

  • All components need to be installed in accordance with the user manual instructions for the correct performance of the unit.
  • This appliance should be used in conjunction with a safety switch.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  • Keep the air outlet free from air-blocking materials such as clothing, plastic bags, or paper.
  • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualifi ed persons in order to avoid a hazard.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Do not use the appliance for other than intended use.
  • Ensure the appliance is on a fl at, even surface.
  • Do not remove the lid whilst the unit is operating.
  • To protect against fire, electric shock, and personal injury, do not immerse cords, plugs, or appliances in water or other liquid.
  • Unplug from the outlet when not in use and before cleaning.
  • Do not use outdoors.
  • Do not place on or near a hot gas, electric burner, heating appliance, or in a heated oven.
  • Place the unit in a fl at a well-ventilated location at least 30cm from the wall or other Appliances.
  • Do not immerse the base in water or try to disassemble.
  • Check the voltage to be sure that the voltage indicated on the nameplate agrees with your voltage.
  • Do not wash or reuse the filter.

PRODUCT SPECIFICATIONS

Air Purifi cation Specifications

System Specifications Air Purification System
Model CLI-AP10W
Product Dimensions L 200 x W 200 x H 180 mm
Net Weight 0.8 kgs
Coverage Area up to 10m2
Replacement Filter CLI-AP10-RF

OPERATION INSTRUCTIONS

  1. Locate a flat stable location with close access to a power point. Make sure there is at least 30 cm between the unit and the wall or other appliances.
  2. Connect one end of the USB cable to the AC adapter and the other end of the USB cable to the USB port at the back of the unit. The unit can also be powered by plugging it into a computer USB port.
  3. Plug the power adapter into an appropriate electrical outlet.
  4. Press the power switch to turn on. The LED light will illuminate, the fan will start running and the unit will start purifying the air.
  5. Press the power switch again to turn off the LED light and again to switch the unit off.

AROMA: To add fragrance, turn off the unit and lift off the lid. Remove the aroma cup and add 2-3 drops of aroma oil onto the sponge. (Fig 1)
Warning: It is recommended that asthma sufferers or those sensitive to fragrances should avoid adding aroma oils to the water as it may act as an irritant. Some fragrances may cause allergic responses in some people.

CHANGE FILTER: The filters used in this Cli~Mate air purifier are not designed to be cleaned, washed, or otherwise reused. The lifespan and duration of the filter depend on the quality, surrounding environment, and how often it is used. Regularly check the filter. If heavily soiled it should be replaced. To replace the filter, turn off the unit and disconnect the power. Lift off the lid, remove the old HEPA filter, discard it, and replace it with a new filter. Cli~Mate Replacement Filter Product Code: CLI-AP10-RF.

IMPORTANT: Unplug the unit from the outlet before adding fragrance or changing the filter. During the setup of this product if you have any questions/comments/issues DO NOT RETURN TO STORE FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT FREE CALL 1300 764 325.

CLEANING AND MAINTENANCE

Before carrying out any maintenance or cleaning of the unit, make sure that the power to the unit is turned off and the power cord is removed from the unit and the power socket.

External cleaning of the unit:

  • Do not clean the unit with any abrasive cleaning agents or solvents.
  • Do not apply any water directly to the unit of cleaning.
  • Only use a soft clean cloth for all cleaning purposes.

CLI-MATE-CLI-AP10-W-Air-Purification-System-FIG-1

COMPONENT IDENTIFICATION AND CHECKLIST

CLI-MATE-CLI-AP10-W-Air-Purification-System-FIG-2

TROUBLESHOOTING

BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLESHOOTING TIPS FIRST.

Problem Possible Causes What To Do
No power 1. The unit is not plugged into a wall socket. 1. Check the

connection to the wall socket and USB ports.
Loud fan motor| 1. Clogged Filter| 1. Change Filter.




Unit overheating

| 1.  Air ventilation around the unit is not sufficient.

2.  Air inlet or air outlet is being obstructed or blocked by foreign objects.

3.  Internal malfunction.

| ****

1.  There must be at least 30cm between the unit and the wall or other appliances.

2.  Ensure there are no objects obstructing the air inlet or air outlet.

3.  Return the unit to the service agent. Call customer care.

Your Aquaport 12-Month Repair or Replacement Warranty

Aquaport warrants this appliance to the first purchaser and is subject to the stated conditions: The warranty covers any defects in material or workmanship in the manufactured product within the first twelve months from the date of purchase. To make a warranty claim you must call Aquaport on toll free number 1300 764 325 for instructions. If a product is found to be faulty there is a 90-day return policy from the date of purchase. For warranty claims outside of 90 days from the date of purchase, the product will be repaired or replaced at our discretion. Repair or replacement costs of the product will be covered under warranty by Aquaport. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. Warranty does not cover fi lter cartridge which is a consumable unless proven to have defects in material or workmanship in the manufactured product. The benefi ts given to you by this warranty are in addition to other rights or remedies of the consumer law in relation to the goods or services to which this warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure.

Conditions of this Warranty

  1. This product has been fully installed in accordance with the user manual installation instructions.
  2. The warranty extends only to repairing or replacing any component that proves to be defective in material or workmanship.
  3. The warranty does not cover defects occasioned by misuse, alterations, accidents, or use for other than the intended purpose.
  4. The warranty does not cover damage to the product caused by accident, fi re, or floods.
  5. Proof of purchase is required for warranty claims. Please keep the purchase receipt in a safe place.

To enable us to register your warranty and provide service should a problem occur, we recommend you register your warranty online at: www.cli-mate.com.au /warranty-and-registration Aquaport Corporation Pty Ltd 70 Hardys Road, Torrensville SA 5031 Customer Care 1300 764 325

CUSTOMER HOTLINE: 1300 764 325
Register your warranty online at
www.cli-mate.com.au/warranty-and-registration Aquaport Corporation Pty Ltd 70 Hardys Road Torrensville SA 5031

Electrical Requirements:
Australia / New Zealand 220-240V 50/60Hz Due to manufacturing alterations product may vary slightly from the pictured.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CLI MATE User Manuals

Related Manuals