Stack TL-100 Traffic Light Remote Programing Instructions
- June 16, 2024
- Stack
Table of Contents
Stack TL-100 Traffic Light Remote Programing
PROGRAMING INSTRUCTIONS
-
Remove the panel from the bottom LED to locate the Receiver PCB.
-
Press The Small Black Button on the Receiver. (LED will turn on)
-
Press Button to be programmed on the Remote. (LED will start blinking)
-
Wait until LED stops Flashing.
-
Press Remote Button Again.
-
Repeat for other Remote Buttons to be programmed.
CUSTOMERS SUPPORT
For Help call Stack Light.com at 678-288-9678
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>