PROGARDEN 875448 Pressure Sprayer User Manual
- June 3, 2024
- PROGARDEN
Table of Contents
PROGARDEN 875448 Pressure Sprayer
WAX SPRAY CHARACTERISTICS
- 8 liter container with safety valve. The pressure can be stabilized into the forewing with the help of a hand pump. Adjustable bar strap.
- Jet nozzle with a nozzle that is installed with help of a handle. Pail filling funnel
DESCRIPTION
- Keeper
- Pump unit
- Safety valve
- Pump handle
- Jet nozzle
- Sprinkler gun
- Nozzle
- Strap
INSTRUCTION
-
Use only tradgardsvard products in liquid form.
-
NEVER use solvents, flammable products, chemicals or other dangerous substances. Such products can cause accidents and damage the spreader’s various components.
ATTENTION! Do not point the beam at people or animals. Keep the spreader outside the rack hall for children; this is not a toy. -
Do not modify the safety valve or any other part of the spreader. The green ribbed cap must not be unscrewed at use, immediately release the pressure.
-
The spreader is delivered fully assembled. Unscrew it open the ribbed lid and fill the container to the specified level the maximum level. Then screw the lid on properly.
-
Turn now the pump handle counterclockwise so that it is free from the hooks on the lid. Pump until you feel a steady resistance. Sat secure the pump handle by clicking it clockwise the hooks on the lid. The spreader is now ready to use.
-
When the jet loses power it is necessary to pump again.
-
The pressure can be released from the spreader before or after use by spraying it out completely and the hall or by carefully pulling out the ridden safety valve. Front use usually pull at.
AM/63, P.O. BOX37211
1030 AE AMSTERDAM, THE NETHERLANDS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>