BLAUPUNKT Bluebot Xtreme Robotic Cleaner User Manual

Bluebot Xtreme Robotic Cleaner
User Manual Enjoy it.

FOREWORD

Welcome!
Thank you for choosing the Blaupunkt Bluebot XTREME.
With this manual we would like to support you in the set-up and usage of your Blaupunkt Bluebot robot.
For extra how-to videos, tips & tricks, FAQs or contact details, go to: www.blaupunktrobotics.eu/support
In this manual you will !nd the following topics to support you in the setup of your robot:

SAFETY REGULATIONS

GENERAL SAFETY REGULATIONS:
Before using this product, please read the following safety instructions and follow all routine safety precautions.
Please read the instructions carefully, please keep the instructions.
Any operation inconsistent with this instruction manual may cause damage to this product.
WARNING:

• Use only the original rechargeable battery and charging station specially equipped by the manufacturer. Non-rechargeable batteries are strictly prohibited, please refer to “product parameters” for battery speci!cation information.
• It is forbidden to use products in environments with open “ames or fragile objects.
• It is forbidden to use products in extremely hot (above 40 °C) or extremely cold (below 0 °C) environments.
• It is forbidden to approach human hair, clothes, !ngers and other parts to the opening and operating parts of the product.
• It is forbidden to use products on wet or stagnant ground. · It is forbidden to use product near burning or extremely hot object, for example a burning !replace.
• It is forbidden for products to absorb any articles such as stones and waste paper that may clog the product.
• It is forbidden for products to absorb any in”ammable substances, such as petrol, toner and toner for printers or photocopies. Prohibit the use of products in clean areas with “ammable items.
• It is forbidden for products to absorb any burning articles, such as cigarettes, matches, ashes and other articles that may cause fire.
• It is forbidden to place articles at the suction opening. Do not use the product when the suction port is blocked. Clean up dust, cotton wool, hair, etc. at the suction opening to ensure smooth air circulation at the suction opening.
• Use the power cord carefully to avoid damage. It’s forbidden to use the power cord to drag or pull the product and the product charging station. It’s forbidden to use the power cord as a handle. It’s forbidden to clamp the power cord in the crack of the door. It is forbidden to pull the power cord at sharp corners and corners. It’s forbidden for the product to run on the power cord while the power cord should be far away from the heat source.
• Do not use a damaged charging station.
• Even if the product has been severely damaged, burning of the product is prohibited, which may lead to explosion of the battery of the product.

NOTE:

• Only authorized technicians can disassemble this product. Users are not recommended to disassemble this product by themselves.
• This product can only use the power adapter provided by the factory. lf other adapters are used, the product may be damaged.
• Do not touch wires, sockets or power adapters when your hands are wet.
• Do not use cloth curtains or body parts to roll into the product drive wheels.
• Do not place this product near cigarette butts, lighters and other smoldering fires.
• Please clean the product after charging.
• Do not bend wires excessively or place heavy objects and sharp objects on the machine.
• This product is an indoor household product. Do not use it outdoors.
• Do not sit on the product.
• Do not use this product (e.g. bathroom) in a wet environment.
• Before using this product, please remove all vulnerable items (e.g. glasses, lamps, etc.) on the ground as well as items (e.g. wires, paper sheets, curtains) that may entangle the side brushes and air suction passages.
• Do not put this product in a place where it is easy to fall (e.g. on desks and chairs by the stair case).
• Please carefully check whether the power adapter is connected to the socket before use, otherwise the battery may be damaged.
• To prevent tripping, please inform other members of the house when this product works.
• Please empty the dust bin before using this product when the dust bin is full.
• The temperature used for this product is 0 to 40 degrees Celsius.
• Do not use this product in high temperature environments.
• Please remove the battery from the machine before the product is scrapped.
• Please make sure that this product is not powered on when removing the battery.
• Please recycle the discarded batteries safely.
• Recommended to block the staircase exit or areas where the robot may fall. The anti-drop sensors prevent the robot from tumbling down stars and steep drops. However, they may work less e#ectively when dirty or used on re”ective/very dark-colored “oors.

PRODUCT INFORMATION

REMOTE CONTROL & CHARGING STATION

INSTALATION INSTRUCTION ROBOT

PRODUCT ASSEMBLY

1. Install the brushes. Make the left side-brush (L) and the rightside brush (R) correspond to L and R on the bottom casing, keep pressing L and R and the side brushes. They are installed when you hear a “click” sound.
2. Place the dust bin or 2-in-1 combi watertank in the robot.
3. Install the charging station
4. Fully charge the robot (before 1st time use)
5. Connect with Bluebot app (optional)
6. Start cleaning

NOTE

• Please do not move the charging station without reason and keep it out of direct sunlight.
• If the charging station is relocated, the robot may fail in positioning and lose the map. When restarted, the robot will rebuild and memorise the map. In the rebuilt map the cleaning information for forbidden areas and other areas may have been lost.
• Direct sunlight will interfere with the recharging signal and consequently, the robot may be unable to return to the charging station.
• The robot cannot be used to remove liquids.
• If the battery level is less than 20% the machine will not work. Please charge it.
• The machine will return to the charging station automatically if the battery level is less than 20% when in use and will be powered o# and then start cleaning automatically after the battery level reaches 80%.
• Please clear various wires (including the power line of the charging station) from the ground before use to avoid outage and damage of objects or wires when wires are dragged by the robot.

INSTALLATION OF MOPPING MODULE

1. Paste the mopping cloth “at onto the bottom of the wattank.
   

2. Fill the water tank: uncap the cover and !ll with water.
   

3. Press and hold the button in the middle of the tank and push it horizontally along the rear of the robot. The module is correctly in place correctly if you hear the sound of a “click”.
   

4. Remove the mopping module When the robot is !nished working, press the button in the middle of water tank to remove the mopping module backwards, empty the water in the water tank and clean the mopping cloth (do not move or turn the robot over during cleaning).

NOTES FOR MOPPING MODULE

• Please do not use the mopping module after it has been left unused.
• For safety reasons, please be sure to remove the mopping module when it is being charged or left unused.
• Please do not mop the carpet. Set a forbidden area in the Bluebot app to prevent the machine from going onto the carpet.
• To achieve a better mopping e#ect, the mopping module should be installed after take out and reassemble the mopping module according to step 3. Please do not move or turn the robot over, otherwise, it could fail in its positioning, lose its map and “forget” the forbidden areas that are programmed.
• The mopping function of the machine is intended for wiping and is not conducive to deep cleaning. It cannot remove stubborn stains e#ectively and replace the labour force.
• Please don’t use any detergent in the watertank to prevent clogging.
• The robot cannot be used to remove liquids.

INSTALLATION BLUEBOT APP

BLUEBOT APPLICATION

1. Fully charge robot
   Place the robot in the charging station to charge and make sure it’s fully charged before use.

2. Download Bluebot app
   Remove the robot from the charging station.

3.  Steps for registration
   Make sure the Robot is on, by holding in the ‘On button’  for a few seconds on top of the robot. Wait until the robot has started fully.

4. Connect robot with app (steps)
   Download the Bleubot app. The app can be found in the Appstore and Google Play.

5. Register a new account if you are not yet an existing user.

6. Open the Bluebot app and press the ‘+ icon’ to add your device.

7. Select the device you want to add.

8. Select your wifi network, enter the password and press confirm.
   Only 2.4 GHz wi-fi networks are supported. Please see your router manual for help.

9. Select ‘AP mode’ in the upper right.

10. After your registration, make sure the robot is removed from it’s charging station. Turn on your Robot by pressing the ‘On button’ . After that is done, press both the ‘Home button’ and ‘On button’ simultaneously for more than 3 seconds connection.

11. Press on the ‘Go to connect’ button in the bottom of your screen.

12. Select the ‘SmartLife xxx’ network from the list and return to the Bluebot app. Your robot will now connect to the App.

USAGE OF THE ROBOT

CLEANING MODE
After the robot is powered on, it will scan and generate the map and divide it into areas intelligently. Then sweep the areas one by one along the wall orderly, efficiently and  thoroughly and plan the cleaning route in a bow/S shape. The robot will return to the charging station automatically after cleaning.

NOTE
Do not move the robot casually and frequently when it is cleaning. After moving, please put the robot near the original position. When it starts again, it will try to reposition itself. After successful positioning, it would follow the planned path and continue to work. If the positioning fails, the robot would abort previous mission, make a map and do the cleaning again.

SPOT CLEANING
When a local area needs a deep sweep, the user specifies a point on the map on the APP, the machine will automatically drive to the vicinity of the point, take the point as the center, and clean within 1.5m x 1.5m.
PARTIAL CLEANING
When the robot cannot be controlled by the mobile APP, please remove the robot to the place you want to clean. Long press the button for 3 seconds, and the robot will clean twice within the scope of 2mx2m centering on itself.

CLEANING SETTINGS

MORE OPTIONS
Timer
Set a timer to program the robot to clean at a certain time or day.
Manual
Control the robot manually with the remote control or use the Bluebot app on your phone as a remote control.
Find robot
Tap this button when you lost your robot and your robot will tell you where it is.
Map management
Use this function to manage your maps (5 max.).
Water regulation
Control the water regulation and choose “Low”, “Medium” or “High”. This will regulate how wet the mop will become when using the robot including the 2 in 1 electric- controlled water tank.
Auto Boost
Auto Boost will increase suction power when the robot gets more friction.
This is designed to increase suction on carpets.
Custom mode
So the robot can remember per area what route to use for cleaning.
Record
View all your previous vacuum cleaning records. You can see how many m2 has been cleaned and the time it took. Here you can also load previously saved maps. Ideal when cleaning different area’s (upper floor for instance).
Voice and volume
Setup your language and change the volume.
Do not disturb mode
Here you can schedule an do not disturb time period.
Consumables and maintenance
Here you will find an overview of consumables and indicates when consumables need to be replaced or maintenance is required.
More info
Here you will find network and robot information
Set wall / Resctricted Area
Use this function to create no-go zones within the area that you are cleaning. You can draw virtual walls that blocks the robot from crossing. Or you create a restricted area for either vacuuming or mopping.
* Via Bluebot app only

MAINTENANCE

ROLLING BRUSH | REGULAR CLEANING

1. Turn over the machine and press the buckle on the rolling brush cover to take out the rolling brush. Filter cover cleaning
2. Remove dust outside and inside the rolling brush using a tiny brush and clean the rolling brush.
3. Reassemble the rolling brush and press the rolling brush and the rolling brush cover tightly to completely close it again.

SIDE BRUSH | REGULAR CLEANING

1. Turn over the machine and pull the side brush out and upwards
2. Remove hair and dirt and reassemble the side brush.
3. Make the left-side brush (L) and the right-side brush (R) correspond to L and R on the bottom casting, press L and R to reinstall them.

DUST BIN | REGULAR CLEANING

1. Press the button and pull the dustbin out backwards.
2. Open, empty and clean the dustbin.
   

FILTER | REGULAR CLEANING

1. Remove the !lter gauze, sponge and HEPA.
2. Clean the removed !lter gauze, sponge, and Dust bin HEPA with water if needed.
3. Shake o# the water drops and dry the pieces naturally, then use them after they have completely dried.
4. When dry, install them in the sequence: !lter gauze > sponge > HEPA.

MOPPING MODULE | 2 IN 1 ELECTRICALLY! CONTROLLED WATER TANK

1. Remove the mop, pour the water out of the water tank after each use.
2. Clean the mop (by hand or in a washing machine; max 40$C), dry naturally, do not tumble dry the mop. Dry the water tank naturally by air.

SENSOR | REGULARY CLEANING
Clean the sensors with a soft, dry mop, including:

1. Three anti-dropping sensors at the bottom of the robot.
2. Electric shock protector and the pins to connect with the charging station at the bottom of the robot (please cut the power o# during cleaning)
3. Signal transmission area of charging station.

BATTERY

• The robot is furnished with high-performance lithium-ion batteries.
• To maintain battery per formance, please keep the robot charged in daily use
• If the machine is left unused for any length of time, please shut down and keep it properly.
• Charge it at least every three months to avoid damaging batteries due to excessive discharge.

FIRMWARE UPGRADE

• Upgrade !rmware using the Bluebot app. If new !rmware is detected, upgrade it according to the report.
• The battery level should be ≥ 50% during !rmware upgrade, so if needed the machine should be placed on the charging station to charge before the !rmware upgrade takes place.

SYSTEM RESET

• Take the dust bin out and press ‘Reset key’. Make sure that you place the robot back on its charging station.
• The current map and timing will be lost, WIFI and personalised settings will be reserved after reset.

BASIC PARAMETERS

USAGE LIMITATIONS

• The product is only used for “oor cleaning in a home environment and cannot be used for outdoor (such as an open terrace), non-ground (such as a sofa), or a commercial or industrial environment.
• Please do not use the product in high areas (such as a balcony, open staircase, open terrace and furniture tops) without a protective fence.
• Please do not use the product at a temperature above 40°C or below 0°C or when there are liquids and sticky substances on the ground.
• Please hang up any cables on the ground before use to avoid being dragged by the robot.
• Please clear fragile objects and impurities (such as vases and plastic bags, etc.) from the ground to avoid damaging valuables when the robot is stuck or impacted slightly.
• People with physical, mental, or perceptual disorders (including children) are not allowed to use or operate the product.
• Children cannot use the product as a toy. Please keep children and pets away when the robot is working.
• Please keep the main brush and other cleaning tools out of reach of children.
• Please do not place objects (including children and pets) on a stationary or moving robot.
• Please keep hair, !ngers, and other parts of the human body or pets away from the suction inlet when the robot is working.
• Please do not use the product to clean burning objects (such as burning cigarette ends etc.).
• Please do not use the product to clean long-piled carpet (some dark carpets may not be cleaned normally).
• Please prevent the robot from suctioning hard or sharp objects (such as waste decorative materials, glass and iron nails, etc.).
• Please do not move the robot by holding the protective cover of the laser distance sensor and collision bumper.
• Please clean or maintain the robot and the charging station when shut- down or in the power-o# state.
• Please do not wipe any part of the product using a wet cloth or any liquid.
• The LEDs emit very strong UV radiation. Don’t look directly into the LED light, UV radiation can harm your eyes. To prevent even slight exposure, wear protective eyewear.
• Keep out of reach of children
• Please use the product according to the User Manual. Users should be responsible for any damages and injuries caused by improper use. Battery and Charging:
• Please do not use a battery, charging station or charger provided by any third parties.
• Please do not dismantle, report or re!t battery or charging station arbitrarily.
• Please keep the charging station away from a heat source (such as a heating plate).
• Please do not wipe or clean the charging station dirt using a wet cloth or wet hand.
• Please do not just abandon used batteries. Used batteries should be disposed of by a professional recycling agency.
• If the power line is damaged or broken, please discard it immediately and replace it through o&cial channels.
• Please ensure the robot shuts down during transportation and the product should be transported in its original packaging.
• If the robot is left unused for a long period, it should be fully charged and then placed in a cool and dry place. Charge the robot at least every three months to avoid damaging batteries due to excessive discharge.
• You may not use detergent products in the water tank, as this may result a blockage of the water supply to the mop.

TROUBLESHOOTING

PROBLEM SOLUTION

The robot does not start| • In case of a low battery level, please place the robot on the charging station and make sure that the charging plates of the robot and charging station connect. The robot will start automatically (if the robot is completely powered off, it can be started automatically after it has charged for a while).
• If the environment temperature is lower than 0°C or higher than 40’C, please use it at a temperature between 0-40″C.
The robot cannot be charged| • Please move the robot away from the charging station and check if the indicator light of the charging station lights up. Confirm that both ends of the charging station power adapter are well connected. Make sure that the charging station is correctly positioned in front of the robot and that the distance between the front of the robot and the charging station is around 2 cm.
• Check if there is poor contact between the charging plates of the robot and the charging station, please clean the charging plates or push the side brushes aside when these block the connection between the charging plates.
The robot does not recharge| The robot is too far away from the charging station, please put the robot near the charging station and try again.
Abnormal behaviour| Shut down the robot by pressing and holding the on/off button and restart the robot after 10 minutes.
Abnormal noise| The main brush, side brush or wheel may be entwined with foreign matter, please shut down the robot and re-move any foreign matter.
Cleaning ability declines or dust falls out| • The dustbin is full, please empty it
• The filter screen is blocked, please clean or replace it
• The main brush is entwined with foreign matter, please clean it
WI-F1 cannot be connected| • The Wi-Fi signal is bad, please ensure that there is a good Wi-Fi signal
• The Wi-Fi is connected abnormally, please reset the W-F1 (router), download the latest APP and try to reconnect it
• Password is incorrect
• The Wi-Fi is either on the 5 Ghz frequency band or on a mixed band of 2.4 and 5 Ghz. The cleaning robot only uses the 2.4G frequency band.
Please log in to your router and make sure that the two Ghz frequencies are split in 2.4 and 5 Ghz and give these different names. Instructions on how to do this can be found in your router manual.
Fixed-time cleaning fails| In case of a low battery level, fixed-time cleaning can only be started when the battery level is 30% or more
Does the robot consume power when it is placed on the charging station| The robot consumes a little power when placed on the charging station. This assures the best performance of the battery.
The robot keeps turning around| • Take out the water tank and/or dust bin
• Push the reset button for 2 seconds
My mop N dirty| You may wash these at maximum 40 degrees by hand or in a washing machine, but these may not be used in a dryer and should be dried naturally.

WARRANTY & RECYCLING

This product has 2 years warranty for manufacturing defects. The warranty period will be counted from the date of purchase of the product, according to purchase invoice. Product warranty only covers manufacturing defects, defects resulting from improper use are not covered in the warranty, such as (but not limited to) dropping the robot, improper transportation, connection to the mains power supply not in compliance with the voltage speci!ed in this manual, insertion of foreign objects and natural wear of parts and parts Such as plastic parts (caps, buttons, handles, latch locks, power cables, etc.) and metal parts (wires, motors, etc.).
Also not covered are damages due to agents of nature, lightning, food, sea, oxidation, humidity etc.). The product will lose its warranty if it presents defects, which after analysis by our technicians, are characterised as being improperly used, used for professional use or for the purpose for which it is not intended (according to the Owner’s Manual). This warranty will be void if it is found that the device has been tampered with, has been repaired by a person or service not authorised by Blaupunkt. The guarantee is only valid with the receipt/ invoice provided at purchase.
Blaupunkt undertakes to provide the above-mentioned services in the warranty period only in places where it maintains an authorised service. Consumers who are not located near an authorised service centre should be responsible for the costs and risks of transport to the authorised service of their choice.
Natural ‘wear and tear’ is not covered under warranty.
This product is for domestic use only.

DISPOSAL AND RECYCLING
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

blaupunktrobotics.eu
+31(0)885667700
@ support@blaupunktrobotics.eu
Published by Smart Life B.V.
Enjoy it.

References

• Robotstofzuiger expert | Blaupunkt robotics
• Blaupunkt Bluebot Klantenservice

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>