AIPHONE IXS-HBDV Preprogrammed IX Box Set Instructions
- June 3, 2024
- AIPHONE
Table of Contents
AIPHONE IXS-HBDV Preprogrammed IX Box Set Instructions
GENERAL OVERVIEW
The IXS-HBDV is a preprogrammed box set including one IX-DV, one IX-MV7-HB, one PoE switch, and a USB drive. The USB drive includes the configuration file and instructional videos on how to add components, which are outlined below, to the system.
Contents
USB Contents
- IX Series Kit Configuration
- Video 1 – Import IX Series Configuration File
- Video 2 – Date and Time
- Video 3 – Adding a Door Station
- Video 4 – Adding a Master Station
- Video 5 – Adding an IXW-MA
Getting Started
Step 1 Unpack contents. Store the USB drive in a safe place as it contains the
system’s configuration file and “how-to” videos.
Step 2 Plug the PoE switch into a 110V AC outlet.
Step 3 Connect IX-DV and IX-MV7-HB to the PoE switch using Cat-5e/6 cable (not
provided). It does not matter which port you plug them into.
Step 4 Wait for a solid blue light on the IX-DV and IX-MV7-HB to indicate that
the stations have properly powered up.
This should take approximately 1 minute.
Optional Steps (Recommended)
Note: The videos and configuration file referenced below are found on the
supplied USB drive.
Step 6 Watch video 1 to import the configuration file onto your PC.
Step 7 Watch video 2 to change date and time settings
Optional Steps
Step 8 Watch video 3 to add more door stations to the system.
Step 9 Watch video 4 to add more master stations to the system.
Step 10 Watch video 5 to add an IXW-MA network relay to the system.