AIPHONE IX-DVF-PR IX Series Video Door Station Installation Guide
- October 30, 2023
- AIPHONE
Table of Contents
IX-DVF-PR IX Series Video Door Station
Product Information
The IX-DVF-PR is a video door station that belongs to the IX Series and comes with a built-in AC-PROX-1G proximity card reader. The card reader uses a standard Wiegand interface to connect to a compatible access control system. It features a camera, a microphone, a white LED for low light illumination, a speaker, a function indicator, a call button, and a card reader. The package contents include the IX-DVF-PR Door Station, Security Driver, Flush mount backbox and tamper-resistant screws.
Product Usage Instructions
To install the IX-DVF-PR, you can either flush mount it or surface mount it
using the SBX-IDVFRA surface mount box. If you choose to flush mount it,
recess the supplied back box into the wall, then attach the mounting bracket
using the four provided bracket screws. If you choose to surface mount it, use
the SBX-IDVFRA surface mount box that can mount to a standard single-gang box
or to any flat surface.
To configure the IX-DVF-PR, use the IX Support Tool or IXG Support Tool and
refer to the appropriate Quick Start Programming Guide for instructions.
To wire the IX-DVF-PR, connect the reader to the access control host according to the host’s installation guide. Use the Wiegand Wiring with the following function and color coding:
- Red: 5 ~ 16V DC
- Black: Ground
- Green: Data 0
- White: Data 1
- Brown: Red LED
- Orange: Green LED
- Yellow: Card Present Beeper
- Blue: fleaPower
- Violet: Shield Ground
For regulatory compliance, disconnect the drain wire at the power supply end of the cable. The IX-DVF-PR comes with an FCC warning that states it complies with Part 15 of the FCC rules and any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Names and Functions
- Camera
- Microphone
- White LED for low light illumination
- Speaker
- Function Indicator
- Call Button
- Card Reader
Features
- Camera with manual vertical adjustment +15º, 0º, or -8º
- Two contact outputs, six trigger inputs
- Built-in RFID proximity reader
- Stainless steel faceplate
- SIP and ONVIF® Profile S compliant
- MicroSDTM card slot
- 802.3af PoE
Package Contents
Installation and Configuration
- IX-DVF-PR Dimensions: 11-11/16″ H x 7″ W x 1-15/16″ D Back Box Dimensions: 10-7/16″ H x 5-13/16″ W x 2-3/8″ D
- For flush mounting, recess the supplied back box into the wall, then attach the mounting bracket using the four provided bracket screws.
- For surface mounting, use the SBX-IDVFRA surface mount box. This box can mount to a standard single-gang box or to any flat surface.
- The IX-DVF-PR is configured as an IX-DVF door station using the IX Support Tool or IXG Support Tool. Refer to the appropriate Quick Start Programming Guide for instructions.
Wiring Diagram
Connect the reader to the access control host according to the host’s installation guide.
Wiegand Wiring
Conductor| Function
Red| 5 ~ 16V DC
Black| Ground
Green| Data 0
White| Data 1
Brown| Red LED
Orange| Green LED
Yellow| Card Present
Blue| Beeper
Violet| fleaPower
Drain| Shield Ground
Specifications
Card Reader
- Reader Type: 125-kHz Proximity Reader
- Reader Model: AC-PROX-1G
- Power Source: 5 ~ 16V DC
- Current: 30mA (average); 75mA (peak)
- Terminations: Color-coded pre-wired pigtail
- Wiring Distance: 500′
- Operating Temp: -31°~150°F (-35°~66°C)
- Operating Humidity: 0% to 90% relative humidity non-condensing
Door Station
- Power Source: PoE (IEEE 802.3af class 0) or 24V DC (PS-2420UL)
- Power Draw: 5.28W
- Camera Unit: 1/3″ CMOS 1.23 megapixel
- Min. Illumination: 5 Lux
- Terminations: RJ45 jack for audio/video Pigtail for door release
- Operating Temp: -40°~140°F (-40°~60°C)
- Wiring Distance: 330′
- Dimensions: 11-11/16″ H x 7″ W x 1-15/16″ D
- w/ SBX-IDVRA: 11-11/16″ H x 7″ W x 3-5/16″ D
FCC WARNING
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference that may cause undesired operation.
For proper regulatory compliance, the drain wire should be disconnected at the power supply end of the cable. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For more details about the features and information above, please contact
Technical Support.
Aiphone Corporation
www.aiphone.com
(800) 692-0200
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>