RENISHAW SFM-A1 Surface Finish Probe Module Instructions
- June 4, 2024
- RENISHAW
Table of Contents
RENISHAW SFM-A1 Surface Finish Probe Module Instructions
SFM-A1
Enhanced access and inspection capability for integrated surface finish
measurement
The SFP2 system consists of a probe and a range of SFM modules which have been
designed to suit the demands of specific parts and features encountered in a
precision manufacturing environment. The probe and modules can be
automatically interchanged with all other REVO® probe options, providing the
flexibility to easily select the optimum tool to inspect a wide range of
features. Each SFM module is its own miniature measuring device, incorporating
Renishaw’s proprietary encoder system to transduce the motion of the stylus
tip.
Features
The A-series of modules is designed to deliver high performance with a good level of capability to access part features.
Typical applications
General purpose; engine block gasket face.
Specification
- Accuracy values are dependent upon a number of system variables. These include the machine size and configuration, scan orientation, condition of stylus tip, part fixturing system and environmental noise.
+44 (0) 1453 524524
© 2017–2021 Renishaw plc. All rights reserved. RENISHAW® and the probe symbol are registered trade marks of Renishaw plc. Renishaw product names, designations and the mark ‘apply innovation’ are trade marks of Renishaw plc or its subsidiaries.
Other brand, product or company names are trade marks of their respective
owners.
Renishaw plc. Registered in England and Wales. Company no: 1106260. Registered
office: New Mills, Wotton-under-Edge, Glos, GL12 8JR, UK.
WHILE CONSIDERABLE EFFORT WAS MADE TO VERIFY THE ACCURACY OF THIS DOCUMENT AT PUBLICATION, ALL WARRANTIES, CONDITIONS, REPRESENTATIONS AND LIABILITY, HOWSOEVER ARISING, ARE EXCLUDED TO THE EXTENT PERMITTED BY LAW.
Read More About This Manual & Download PDF: