GE Profile PEP7036DT 36 Inches Built-In Touch-Control Electric Cooktop Instruction Manual
- June 3, 2024
- GE Profile
Table of Contents
PEP7036DT
36″ Built-In Touch-Control Electric Cooktop
Instruction Manual
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 5″ free area between the bottom of the cooktop to
any combustible material, i.e., shelving. Free area not required when
installing wall oven underneath cooktop. Refer to installation instructions.
Requires a 15″ minimum from cooktop to adjacent overhead cabinets. Units are
furnished with a 48″ flexible armored cable.
NOTE: 36″ Ribbon cooktops are approved for use over select GE 30″ Single
Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer
installation instructions packed with product for current dimensional data. If
installed with a GE Telescopic Downdraft System, consult both the cooktop and
downdraft installation instructions packed with product before installing.
Cooktop gas/ electric supply may need to be re-routed to install downdraft.
The countertop cutout requires 23-1/2″ minimum flat countertop surface and 25″
minimum total countertop depth. In addition, other clearances to front edge of
the countertop must be considered. Before installing, consult installation
instructions packed with product for current dimensional data.
APPROXIMATE COOKING DIMENSIONS
To
insure accuracy, it is best to make a template when cutting the opening in the
counter
INSTALLATION ABOVE A WALL OVEN
| VOLTAGE (60HZ AC) | 240V | 208V |
|---|---|---|
| CONNECTED LOAD (MAX.) | 9.7kW | 7.3kW |
| CURRENT DRAW (MAX.) | 40.4 Amps | 35.1 Amps |
| RECOMMENDED CIRCUIT BREAKER† | 50 Amps | 40 Amps |
† NOTE: Check local codes for required breaker size.
FEATURES AND BENEFITS
Power Boil on Tri- and Dual-Ring Elementst
Precision Temperature Control
Guided Cooking
Glide Touch Controls – 11 Control Levels
Easy Clean Surface
Synchronized Elements
Chef Connect
Built-in WiFi
Compatible Cooktop with Smart Cookware
Keep Warm Setting
Control Lock
Hot Surface Indicator Lights
Fit Guarantee
Model PEP7036DTBB – Black on black
* OPTIONAL STAINLESS STEEL CLAD ALUMINUM
GRIDDLE
Achieve even results with this lightweight griddle, tailored to fit GE
SyncBurners. Order part number JXGRIDL1.
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand? GE cooktops
are guaranteed for an exact fit or GE Appliances will pay up to $100 toward
modifications.
Visit geappliances.com for more info.
COMPATIBLE COOKTOP WITH SMART COOKWARE
Smart pans easily pair with this smart cooktop to ensure you get the perfect
cooking results. Accessories sold separately.
For answers to your Monogram, GE Café™, GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Listed
by Underwriters Laboratories
Specification Revised 10/22