GE Profile JEP5030ST 30 Inch Built-In Knob Control Electric Cooktop Installation Guide
- October 30, 2023
- GE Profile
Table of Contents
JEP5030ST 30 Inch Built-In Knob Control Electric Cooktop
Installation Guide
JEP5030ST 30 Inch Built-In Knob Control Electric Cooktop
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT: Requires a 5″ free area between the bottom of the cooktop to any
combustible material, i.e., shelving. Free area not required when installing
wall oven underneath cooktop. Refer to installation instructions. Requires a
15″ minimum from cooktop to adjacent overhead cabinets. Units are furnished
with a 48″ flexible armored cable.
NOTE: 30″ Ribbon cooktops are approved for use over select GE 27″ and GE
30″ Single Wall Ovens and Warming Drawers. Refer to cooktop and wall
oven/warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Telescopic Downdraft System, consult
both the cooktop and downdraft installation instructions packed with product
before installing. Cooktop gas/electric supply may need to be re-routed to
install downdraft. The countertop cutout requires 23-1/2” minimum flat
countertop surface and 25” minimum total countertop depth. In addition, other
clearances to front edge of the countertop must be considered. Before
installing, consult installation instructions packed with product for current
dimensional data.
CUTOUT FILLER TRIM KIT: A filler trim kit is available for use if your
countertop cutout is larger than the dimension shown, up to 29-13/16″ x
20-7/16″. Order JXTR32B for black or JXTR32W for white, to reduce the cutout
opening for installation of this cooktop. These kits may be ordered from your
GE Appliances Dealer.
APPROXIMATE COOKING DIMENSIONS
INSTALLATION ABOVE A WALL OVEN For answers to your Monogram, GE Café™ , GE
Profile™ or GE Appliances product questions, visit our website at
geappliances.com or call GE Answer Center® Service,
800.626.2000.
| VOLTAGE (60HZ AC) | 240V | 208V |
|---|---|---|
| CONNECTED LOAD (MAX.) | 9.6kW | 7.2kW |
| CURRENT DRAW (MAX.) | 40 Amps | 34.6 Amps |
| RECOMMENDED CIRCUIT BREAKER | 40 Amps | 40 Amps |
NOTE: Check local codes for required breaker size. Listed by Underwriters Laboratories
FEATURES AND BENEFITS
- Easy Clean Surface
- Power Boil on Dual-Ring Element (3,100W)
- Additional Power Boil Dual-Ring Element (2,200W)
- Keep Warm Setting
- Control Lock
- Hot Surface Indicator Lights
- Fit Guarantee
- Flexible Cooktop
- Melt Setting
- Model JEP5030STSS – Stainless steel
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand? GE cooktops
are guaranteed for an exact fit or GE Appliances will pay up to $100 toward
modifications.
Visit geappliances.com for more info. 
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>