PortKeys PT5 5 Inch 4K HDMI Touchscreen Monitor Anamorphic User Manual

PortKeys PT5 5 Inch 4K HDMI Touchscreen Monitor Anamorphic User Manual

Product Information

Appearance Size

Standard Accessories

• PT5 Monitor X1
• Safety BoxX 1
• HDMI A to A Cabled1
• Sun Shaded1
• HDMI A to D CableX 1
• Snail Mounts 1
• Sun Shade Rubber Cover L X1
• User ManuaXl 1
• Sun Shade Rubber Cover R X1

Parameters

• Size: 5″
• Dimension:   136x72x17mm
• Viewing Angle:   178°H/178°V
• Brightness:   500nit
• Resolution:   1920×1080
• Contrast Ratio:   1000:1
• Weight: 130g
• Color: 10bit(8+2FRC)
• Material:   ABS Engineering Plastics
• Input Voltage:   5V-24V
• Max Power:   6W

Signal Specifications

Supported input and output resolution and frame rate

HDMI Signal

• 4096X 2160p@24Hz
• 3840X 2160p@23.97Hz,24Hz,25Hz,29.97Hz,30Hz
• 1920X 1080p@23.97Hz,24Hz,25Hz,29.97Hz,30Hz,
• 50Hz,59.94Hz,60H
• 1920X 1080psf@23.97Hz,24Hz,25Hz,29.97Hz,30Hz
• 1920X 1080i@50Hz,59.94Hz,60H
• 1280X 720p@50Hz,59.94Hz,60H
• 720X 576p@50Hz
• 720 x576i@50Hz
• 720 X480p@50Hz,59.94Hz,60Hz
• 720 x480i@50Hz,59.94Hz,60Hz

Function Setting Page Switch
Swipe on any page to adjust to the function setting page;

[Use of Shortcut Function]

1. Add function icon;
2. Switch HDMI/SDI signal;
3. 3D LUT ON/OFF;
4. Screen brightness (1-10);
5. Battery level;
   

[Shortcut Function Settings]

1. Click ” “add shortcut functions to the left and right sides If the function icons on the left and right have been added (picture 1) ;can swipe down in the shortcut function title area to continue adding;
2. Select the function icon to replace;
3. Select the function icon and click” “to delete;
4. ” “Return key;
   

[Function Parameter Settings]

• Click” “, The parameter information setting is displayed at the bottom (Picture 2);
  
  

• Hold  and slide to the right ,The bottom will jump to the function parameter settings;
  For other functions, user can repeat the above operations or directly click to set parameter (Picture 3);
  

• Hold” “and slide to the left, The bottom will jump to the function parameter settings;
  For other functions, you can repeat the above operations or directly click to set parameters (Picture 4);
  

[Long press the icon to change the function or delete the function]
If this feature is not required ,Long press” “to jump to (Picture 5) for function replacement/deletion;

[System settings page switch]
Swipe left on any page to adjust to the system settings page;

[Image Settings]

1. Click ” “
2. Parameter setting information;
3. Parameter setting information (Next page );
4. Display the number of the page of Image parameter setting; Swipe left and right in the bottom information area to switch pages;

[System Setting]

1. Click “ “
2. System parameter setting information;
   

[Version Setting]

1. Click” “
2. View version information and upgrades;
   

[LUT Setting]

1. Click” “
2. LUT setting information;
   

Customer Support

Company Address: 1406 14th Floor Block D Building 3
Phase I Tianan yungu Longgang District
ShenZhen China
Factory Address: No.2nd Floor Building A Jingjiang
Industrial Park NO.101 Shangwei Road
Longhua District Shenzhen China
Services Hotline: 400-8090-896
Email: sales@:pkscorp.com
Website: www.portkeys.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>