PORTKEYS LEYE SDI 3G-SDI and HDMI 2.4 Inch LCD Electronic Viewfinder User Manual

PORTKEYS LEYE SDI 3G-SDI and HDMI 2.4 Inch LCD Electronic Viewfinder

Product Appearance Size

Operating temperature range: 0 ℃ ~ 40 ℃

Standard Accessories

• LEYE SDI X1
• D-TAP to 4 pin Aviation
• Head Power Cord X1
• Round Sponge
• Eye Mask X2
• U Disk X1
• HDMI Adapters X1
• Warm Prompt Card X1
• After Sales Service Card X1

Parameter

• Size： 2.4″
• Dimension： 125x70x77mm
• Viewing Angle： 160°H/160°V
• Brightness： 450nit
• Resolution： 1440×900
• Contrast Ratio ：1100:1
• Weight： 265g
• Color： 8bit
• Material： Aluminum Alloy+ABS Engineering Plastics+Red Oak
• Video Signal Input： 3G-SDI、4K HDMI、HDMI
• Input Voltage： DC 7~24V/USB 5V
• Maximum Power： 5W
• USB-A Upgrade Firmware /Load LUT
• Menu Language： 简体中文/English

Supported input resolution and frame rate

HDMI Signal

• 4096×2160p@24Hz
• 3840×2160p@23.97Hz,24Hz,25Hz,29.97Hz,30Hz
• 1920×1080p@23.97Hz,24Hz,25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz
• 1920×1080psf@23.97Hz,24Hz,25Hz,29.97Hz,30Hz
• 1920×1080i@50Hz,59.94Hz,60Hz
• 1280×720p@50Hz,59.94Hz,60Hz
• 720×576p&720×576i@50Hz
• 720×480p&720×480i@50Hz,59.94Hz,60Hz

SDI Signal

• 1920×1080p@50fps,59.94fps,60fps
• 1920×1080p@50Hz,59.94Hz,60Hz YUV422
• 1920×1080p@23.98Hz,24Hz,25Hz,29.94Hz,30Hz YUV444/YUV422/RGB444
• 1920×1080psf@23.98Hz,24Hz,25Hz,29.97Hz,30Hz YUV444/YUV422/RGB444
• 1920×1080i@50Hz,59.94Hz,60Hz YUV444/YUV422/RGB444
• 1280×720p@50Hz,59.94Hz,60Hz YUV444/YUV422/RGB444
• 720×480i@59.94Hz YUV422
• 720×576i@50Hz YUV422

• Apply 3D LUT mode and it will be* saved automatically to “user storage”（Click MENU as Confirm）

• *LUT file could be stored repeatedly,to delete,please enter the user storage interface and delete it by the above steps.LUT file format Cube，support
  16/17/32/33/64/65 precision (LUT_3D_SIZE).

• UT File Deletion (Needs to be performed in the state of access signal

• Function 2、function 3（The function setting is same with function 1）

Universal Software Upgrade Tutorial

Attention

1. Place the new firmware in the root directory of the U disk;

2. Keep the device powering on during updating;

3. Supports FAT, FAT32, ExFAT and NTFS U disk. (FAT32 is highly recommended);

4. Use the U disk with the storage below 16G;

5. If the firmware isn’t updated successfully, please follow from step ③ and update again;
   Update method takes LEYE SDI as an example,for other models, please download the corresponding model upgrade package in our official website and follow the steps below.

6. Download the firmware zip, unzip it ,and then send the upgrade file(LEYE.bin)(LEYE_MIU.bin)to the root directory of the U disk.

7. Supply power to the monitor,insert the U disk with upgrade file into the USB interface of the body.

8. Boot up the monitor,click MENU to open main menu, select“Firmware”and click into firmware interface.

9. Select Firmware Upgrade(USB)

10. Click and confrim upgrade.

11. Upgrading is in progress. After that,the monitor will restart in black screen automatically
    (Do not power off during this process).

12. After completing the upgrade,boot up the monitor and click Main Menu → Firmware → Virsion Information to confrim whether the software is successfully upgraded.

www.portkeys.com

Customer Service: services@portkeys.com

Company Address： 1406, 14th Floor, Block D, Building 3,
Cloud Park, Longgang District, Shenzhen,
Guangdong, China
Factory Address： 2nd Floor, Building A, Jingjiang Industrial Park, NO.101, Shangwei Road, Longhua District, Shenzhen,Guangdong, China Customer Service: services@portkeys.com Website： www.portkeys.com

SHENZHEN PORTKEYS ELECTRONIC TECHNOLOGY CO.,LTD

References

• Portkeys Official Store | Camera Monitors for Filmmaker

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>