PortKeys LH5P On-Camera Monitor User Manual
- June 4, 2024
- PortKeys
Table of Contents
PortKeys LH5P On-Camera Monitor
Product Information
Product Information
Standard Accessories
LH5P Monitor X1 Power Cord (Aviation Port – DC) X1
Short Antenna X1 Elbow Short Antenna X1
U Disk X1
Safety Box X1
Warm Prompt Card X1 LANC Control Cable X1 TYPE-C Control Cable X1
Supported input resolution and frame rate
HDMI Signal
-
4096×2160p@24Hz
-
3840×2160p@23.97Hz,24Hz,25Hz,29.97Hz,30Hz
-
1920×1080p@23.97Hz,24Hz,25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz 1920×1080psf@23.97Hz,24Hz,25Hz,29.97Hz,30Hz
-
1920×1080i@50Hz,59.94Hz,60Hz
-
1280×720p@50Hz,59.94Hz,60Hz
-
720×576p&720×576i@50Hz
-
720×480p&720×480i@50Hz,59.94Hz,60Hz
Supported output resolution and frame rate
HDMI Signal -
4096×2160p@24Hz
-
3840×2160p@23.97Hz,24Hz,25Hz,29.97Hz,30Hz
-
1920×1080p@23.97Hz,24Hz,25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz 1920×1080psf@23.97Hz,24Hz,25Hz,29.97Hz,30Hz
-
1920×1080i@50Hz,59.94Hz,60Hz
-
1280×720p@50Hz,59.94Hz,60Hz
-
720×576p&720×576i@50Hz
-
720×480p&720×480i@50Hz,59.94Hz,60Hz
Function Setting
- Add function icon.
- HDMI signal.
- 3D LUT ON/OFF.
- Screen brightness (1-10).
- Fan strength (Low /Middle/High).
- Battery level.
Custom Function Settings
-
Click “ ”add shortcut functions to the left and right sides;
If the function icons on the left and right have been added (Picture 2);can swipe down in the shortcut function title area to continue adding. -
Select the function icon to replace.
-
Select the function icon and click“
-
”Return key.
-
The default is F1-F4 custom function, you can slide left/right to enter the function menu to change the custom function
-
F key setting is completed,F1-F4 button on the monitor to turn on/off the function.
-
Click “
-
Parameter setting information.
-
Parameter setting information(Next page ).
-
Display the number of the page of Image parameter setting. Swipe left and right in the bottom information area to switch pages.
[System Setting]
- Click “
- System parameter setting information.
[LUT Setting]
- Click“
- LUT setting information.
Camera Model Setting
- Click“
- Camera model options :Wi-Fi/USB、 Z CAM E2(LANC)、BMPCC4K(BLE)、 BMPCC(LANC)、Canon(LANC)、 Sony(MUTI)、Sony(LANC)、Panasonic (Remote).
- Display the number of the page of camera brands ,Swipe left and right in the bottom information area to switch pages.
Bluetooth Connection
- Click“
- Select“”, Make bluetooth connection( Successfully connected bluetooth record).
- Select “ ”,turn on the BMPCC4K/6K Bluetooth function and record the passcode (picture 1),enter the passcode on the monitor(Picture 2 and 3),click“ ”,After successful connection, The Bluetooth icon will be displayed in yellow
- Select“ ”to disconnect the Bluetooth connection.
Wirelessly Connect Sony A7M iii to Portkey Monitor
-
Turn the camera ON,select the “MENU” tab.
-
Go to the Network settings, select (Network 1) > 【Ctrl w/ Smartphone 】 (Picture 1).
-
Turn “Ctrl w/ Smartphone” On, then select Connection
-
Press the ( Delete) button, select “Connect via password”
6.Tap “Add new device”, select the Wi-Fi name of Sony A7MIII (Picture 5).
Motor Setting
- Click to select channel options“
- Select the channel option to set the channel parameters.
- Record.
- Adjust the motor stroke.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>