PortKeys BM5WR SDI 5.5 Inch Touch Screen Monitor User Manual

PortKeys BM5WR SDI 5.5 Inch Touch Screen Monitor

Product Information

Product Appearance Size

• Operating temperature range: 0 ℃ ~ 40 ℃

Standard Accessories

• BM5 WR Monitor X1
• LANC Control Cable 0.4m X1
• TYPE-C Control Cable 0.4m X1
• Warm Prompt Card X1
• Safety Box X1
• L-Type Antenna X2
• Power Cord 1m (Aviation
• Head – D-TAP) X1
• Power Cord 0.4m (Aviation
• Head – DC) X1
• U Disk（Manual，3D LUTs，
• Firmware Inside） X1

Parameter

Signal specifications

Supported input resolution and frame rate
HDMI Signal

• 1920×[email protected],24Hz,25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz
• 1920×[email protected],24Hz,25Hz,29.97Hz,30Hz
• 1920×1080i@50Hz,59.94Hz,60Hz
• 1280×720p@50Hz,59.94Hz,60Hz
• 720×576p&720×576i@50Hz
• 720×480p&720×480i@50Hz,59.94Hz,60Hz

Supported input/output resolution and frame rate
SDI Signal

• 1920×1080p@50fps,59.94fps,60fps
• 1920×1080p@50Hz,59.94Hz,60Hz YUV422
• 1920×[email protected],24Hz,25Hz,29.94Hz,30Hz YUV444/YUV422/RGB444
• 1920×[email protected],24Hz,25Hz,29.97Hz,30Hz YUV444/YUV422/RGB444
• 1920×1080i@50Hz,59.94Hz,60Hz YUV444/YUV422/RGB444
• 1280×720p@50Hz,59.94Hz,60Hz YUV444/YUV422/RGB444
• 720×[email protected] YUV422
• 720×576i@50Hz YUV422

Shortcut Function Page

[Function settings page switch] Swipe right on any page to adjust to the function setting page;
(the function setting page)
[Shortcut Function Setting]

1. Add function icon;

2. Switch HDMI/SDI signal;

3. 3D LUT ON/OFF;

4. Screen brightness (1-10);

5.  Fan strength (Low /Middle/High);

6. Battery level;

7.  Click “ ”add shortcut functions to the left and right sides;
   If the function icons on the left and right have been added ;can swipe down in the shortcut function title area to continue adding；

8.  Select the function icon to replace；

9.  Select the function icon and click“ ”to delete；

10.  Click“ F-Key ”to enter F key Setting

11. ”Return key；

12.  The F key has 4 physical keys, which can be customized;
    Select any button in this area in the function icon “2” for custom function settings;

13. ”Return key；

14. F key setting is completed,F1-F4 button on the monitor to turn on/off the function.;

Click“ ”，The parameter information setting is displayed at the bottom；Hold“ ”and slide to the right ,The bottom will jump to the function parameter settings; For other functions, user can repeat the above operations or directly click to set parameters ;Hold“ ”and slide to the left, The bottom will jump to the function parameter settings; For other functions, you can repeat the above operations or directly click to set parameters ;
If this feature is not required ,Long press“ ”to jump to for function replacement/deletion；

Setting Page

[System settings page switch]
Swipe left on any page to adjust to the system settings page；( the system settings page)
[Image Settings]

1. Click “
2. Parameter setting information；
3. Parameter setting information(Next page )；
4.  Display the number of the page of Image parameter setting; Swipe left and right in the bottom information area to switch pages；

[System Setting]

1. Click “
2. System parameter setting information；

[LUT Setting]

1.  Click“
2.  LUT setting information；

[Version Setting]

1. Click“
2. View version information and upgrades；

Camera control Page

[Camera control settings page switch]
Swipe down on any page can be adjusted to the camera control settings page；(the camera control settings page)

[Camera Model Setting]

1. Click“

2.  Camera model options： Wi-Fi/USB、Z CAM E2、
   BMPCC4K(BLE)、BMPCC、 Canon、
   Canon （LANC）、Sony(MUTI)、
   Sony(LANC)、Panasonic、 Panasonic(USB)；
   Currently selected“BMPCC4K(BLE)”；

3. Display the number of the page of camera brands ,Swipe left and right in the bottom information area to switch pages；
   

[Bluetooth Connection]

1. Click“
2. Select“ ”，Make bluetooth connection( Successfully  connected bluetooth record);
3. Select “ ”,turn on the BMPCC4K/6K Bluetooth function  and record the passcode (picture 1),enter the passcode on the monitor(Picture 2 and 3)，click“ ”，After successful connection, The Bluetooth icon will be displayed in yellow
4. Select“ ”to disconnect the Bluetooth connection；
   

[FOCUS Setting]

1. Click“ FOCUS
2.  Adjust the parameter on the progress bar；
3. Record；

Camera control Page

Wi-Fi Connection

1. On the KOMODO camera, go to the Main menu, find Communication, select Wi-Fi, and then enable” Ad-Hoc”.

2. Ad-Hoc: KOMODO will create its own network, and the name and password will default to the PIN code of the camera. Make sure that the SSID setting starts with “KOMODO” or “komodo” and the frequency band is “2.4GHz”.

3. Select the “Wi-Fi / USB” camera mode on the monitor, Click the ” ” to open the ” “Wi-Fi.

4. Select the “MY DEVICE” to connect to the Wi-Fi (Connected Wi-Fi).

5. Select ” ADD NEW DEVICE “, select the Wi-Fi name on the monitor, And enter the password. Tap “BLACK BUTTON”, the Wi-Fi icon will be displayed as ” ” after successful connection.
   
   

6. Select “DISCONNECT ” to disconnect the Wi-Fi.

Motor Page

Motor control settings page switch

Swipe up on any page can be adjusted to the motor control settings page；

Motor Setting

1. Click to select channel options“ FOCUS NO 1
2. Select the channel option to set the channel parameters；
3. Record；
4. Adjust the motor stroke；

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>