LAMAX PARTYBOOMBOX700 Bluetooth Party Speaker User Guide

LAMAX PARTYBOOMBOX700 Bluetooth Party Speaker

Product Information

microphone
Microphone bass level| Controls the bass level of the microphone
Microphone echo control| Controls the echo effect on the microphone
Microphone input 1| Input for microphone 1
Microphone input 2| Input for microphone 2
Microphone switch| Switch to turn on/off the microphone
Power| Switch to turn the speaker on/off
12V input| Input for 12V power
Power cable input| Input for power cable
AUX input| Input for external audio device
AUX output| Output for external audio device

Product Usage Instructions

Charging and LED Indicators
Fully charge the speaker battery before using it for the first time. A low battery may result in a gradual decrease in performance and possible audio or lighting outages. In this case, immediately plug the speaker into the mains or turn it off.

Power Switch
Switch the speaker on/off by pressing the POWER button. The display will light up.

Bluetooth Pairing

1. Switch on the speaker and make sure Bluetooth mode is selected on the display. If it is not, select it by repeatedly pressing the MODE button on the rear panel near the display. The speaker is thenready for pairing.
2. Activate Bluetooth connectivity on your smartphone or another device. Select “LAMAX PartyBoomBox700” from the list of available devices. The speaker beeps when pairing is successful.
3. Playback can be controlled either with a paired device, directly on the speaker, or by remote control. Note: Bluetooth connection works best within 10 meters and in an open area.

TWS (True Wireless Stereo) Pairing
To pair two speakers with each other:

1. Turn on both speakers and make sure they are not paired with a multimedia device.
2. Use the MODE button to put both devices into Bluetooth mode. “no B” will appear on the LCD screens.
3. Hold down the PLAY/PAUSE button for 5 seconds on one of them and it will become the main speaker. A beep will sound, and the main speaker will act as the right channel. The other speaker will audibly announce the left channel.

To unpair the speakers, press the REPEAT button on the main speaker or turn it off.

Player Controls

Using an External AUX Source

1. Use the MODE button on the rear panel of the device to select AUX mode.
2. Connect your audio device to the external AUX IN jacks on the rear panel, and then control playback on the external audio device or the speaker itself.

Using the Microphone

1. Connect the supplied microphone to the MIC IN input on the rear panel of the unit and turn it on with the switch on the microphone.
2. Turn the MIC VOL dial on the rear panel of the unit to increase or decrease the microphone volume.
3. Turn the MIC TREBLE dial on the rear panel of the unit to increase or decrease the microphone treble level.
4. Turn the MIC BASS dial on the rear panel of the unit to increase or decrease the bass level of the microphone.
5. Turn the ECHO dial on the rear panel of the device to increase the echo effect on the microphone.
6. Press the MICROPHONE SWITCH button to automatically mute the track being played when speaking into the microphone. Note: If you place the microphone next to the speaker, turn off the microphone. Otherwise, the speaker may make an unpleasant and loud sound.

Controls

1. Volume level
2. Treble level
3. Bass level
4. Microphone treble level
5. Microphone echo effect level control
6. Microphone bass level
7. Microphone echo control
8. Microphone input 1
9. Microphone input 2
10. Microphone switch
11. Power
12. 12V input
13. Power cable input
14. AUX input
15. AUX output

Charging and LED Indicators

Fully charge the speaker battery before using it for the first time.

Indicators:

• LED glows red – the speaker battery is charging
• LED glows green – the speaker battery is fully charged

Note : A low battery may result in a gradual decrease in performance and possible audio or lighting outages. In this case, immediately plug the speaker into the mains or turn it off.

Power
Switch the speaker on/off by pressing the POWER button. The display will light

Bluetooth pairing

1. Switch on the speaker and make sure Bluetooth mode is selected on the display. If it is not, select it by repeatedly pressing the MODE button on the rear panel near the display. The speaker is then ready for pairing.
2. Activate Bluetooth connectivity on your smartphone or another device. Select „LAMAX PartyBoomBox700“ from the list of available devices. The speaker beeps when pairing is successful.
3. Playback can be controlled either with a paired device, directly on the speaker, or by remote control.
   Note : Bluetooth connection works best within 10 meters and in an open area.

TWS
To pair two speakers with each other, turn on both speakers and make sure they are not paired with a multimedia device. Use the MODE button to put both devices into Bluetoo-th mode, „no B“ will appear on the LCD screens. Hold down the PLAY/PAUSE button for 5 seconds on one of them and it will become the main speaker. A beep will sound and the main speaker will act as the right channel. The other speaker will audibly announce the left channel.
To unpair the speakers, press the REPEAT button on the main speaker or turn it off.

Player Controls

1. SD CARD
   Input for inserting an SD card. Select this source using the MODE button.

2. PLAY/PAUSE
   Press to pause or start playing music.

3. PREVIOUS
   Press to skip to the previous track.

4. NEXT
   Press to skip to the next track.

5. REPEAT
   Press to toggle between the modes „ONE“ (plays the current track), „ALL“ (plays all), and „rAn“ (plays songs randomly).

6. MODE
   Press to switch between music sources: Bluetooth, SD card, USB, AUX, FM radio. The icon on the left of the display will show you which source is currently selected.

7. USB
   Input for a USB device (e.g. flash drive). Select this source using the MODE button. This input is for music playback only. Connecting a device (mobile phone) to the USB input for charging may result in permanent damage to the speaker. We do not recommend using USB extension cables. Do not disconnect the USB drive from the unit while data is being played or loaded from the USB device.

8. LED MODE
   Press to select between light modes.

Using an external AUX source

1. Use the MODE button on the rear panel of the device to select AUX mode.
2. Connect your audio device to the external AUX IN jacks on the rear panel, and then control playback on the external audio device or the speaker itself.

Using the microphone

1. Connect the supplied microphone to the MIC IN input on the rear panel of the unit and turn it on with the switch on the microphone.
2. Turn the MIC VOL dial on the rear panel of the unit to increase or decrease the microphone volume.
3. Turn the MIC TREBLE dial on the rear panel of the unit to increase or decrease the micro-phone treble level.
4. Turn the MIC BASS dial on the rear panel of the unit to increase or decrease the bass level of the microphone.
5. Turn the ECHO dial on the rear panel of the device to increase the echo effect on the microphone.
6. Press the MICROPHONE SWITCH button to automatically mute the track being played when speaking into the microphone.
   Note : If you place the microphone next to the speaker, turn off the microphone. Otherwise, the speaker may make an unpleasant and loud sound.

Location
The speaker has been designed to be placed on the ground, on any solid and stable base. Note: If you will not be using the speaker for a long time, make sure it is turned off and unplug it from the mains.

Remote control

1. Standby ON/OFF
2. Select input
3. Sound modes
4. Increase volume
5. Play/Pause
6. Music playback: Next track, Next FM channel (press) / Auto-tune to a higher frequency (hold)
7. Repeat mode
8. Select a track from a USB/SD card or select radio frequency/FM channel
9. Scan FM channels
10. Decrease volume
11. Music playback: Previous track, Previous FM channel (press) / Auto-tune to a lower frequency (hold)
12. Mute

Parameters

• Total Peak Power 700 W
• RMS 50 W
• Subwoofer Diameter 2×21 cm
• Tweeter Diameter 3 cm
• Frequency Range 18–20000 Hz
• Sensitivity 96 dB
• Number of Bands 2
• Battery 12 V / 7 Ah
• Input (DC jack) AC 100–240 V, 50/60 Hz

Printing errors reserved.
Download the current version of the user manual here: https://lamax- electronics.com/partyboombox700/manual

References

• lamax-electronics.com/partyboombox700/manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>