1MORE SonoFlow SE HQ30 Noise Cancelling Headphones User Guide
- June 13, 2024
- 1more
Table of Contents
1MORE SonoFlow SE HQ30 Noise Cancelling Headphones
Product Information
The 1MORE SonoFlow SE HQ30 is a pair of ANC Type-C headphones manufactured by Tiinlab Corporation. The headphones can be connected to a mobile phone via Bluetooth and can be controlled using various buttons on the device. The headphones also come with the 1MORE MUSIC APP for users outside mainland China, which provides product upgrades and additional features. The headphones have a built-in battery that needs to be fully charged before first use. The headphones comply with FCC radiation exposure limits and Part 15 of the FCC Rules. They also comply with CMIIT ID: 2023DP8970, FCC ID: 2ASDI-HC306, and IC: 24662-HC306 regulations.
Product Usage Instructions
- Power On: Press and hold the power button for 2 seconds.
- Power Off: Press and hold the power button for 5 seconds.
- Playback Play / Pause: Click the power button.
- Phone Call Answer / Hang up: Click the power button.
- Switch to the mobile phone: Double click the power button.
- Decline: Press and hold the power button for 2 seconds.
- Voice Assistant (Bluetooth on and not in a call): Double click the power button.
- ANC ON / Pass-through / ANC OFF (Switch in turn): Click the power button.
- Volume +: Click the volume up button.
- Previous Track: Press and hold the volume up button for 2 seconds.
- Volume -: Click the volume down button.
- Next Track: Press and hold the volume down button for 2 seconds.
Tips:
- Please read the instruction manual carefully and retain it for future reference.
- Before first use, fully charge the battery.
- If the headphones have been unused for more than 3 months, it is recommended to charge them to improve battery capacity.
- Only use chargers that are FCC approved.
- In dry environments, static electricity may numb your ear, which is not related to the quality of the product.
Safety Information **
**
- Never disassemble the headphones. There are no user-serviceable parts inside.
- Do not immerse the product in water or any other liquid.
- Do not expose the product to extreme temperatures or direct sunlight.
- Do not disassemble or modify the product.
- Do not use oil or any volatile liquid to clean the product.
- Do not listen at high volumes for extended periods of time.
- Do not use the headphones in traffic or any other situation where it would be dangerous to be unaware of noises around you.
- Adult supervision is required for children aged 6 and under.
FAQ
-
Why the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes. -
Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the Media Audio option is on. -
Why there is no sound from the headphones while making phone calls after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the Phone Audio option is on. -
Why the Bluetooth connection is not stable and causes some interruptions?
-
Try shortening the distance between your headphones and device. Avoid solid barriers in between.
-
Please keep away from strong interference sources, such as Wi-Fi and GPRS.
-
Please make sure the Bluetooth antenna of your device is not blocked.
-
Why some control functions do not match those in the manual while using third party music/video player Apps?
Your operating system and the third party music/video player apps may have different settings for the control functions. We recommend that you use the music/video player apps that your device has originally provided.
- For more detailed product FAQs, please visit the product support section under www.1more.com
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine,
fire or the like.
- Tiinlab Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The full text of the EU declaration of conformity is available at the following internet address:www.1more.com.
- Hereby, Tiinlab Corporation declares that the radio equipment type HC306 is in compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UKCA declaration ofconformity is available at the following internet address:www.1more.com
RF exposure information: The device has been evaluated to meet general RF
exposure requirement.
The device can be used in portable exposure condition without restriction.
Radiation Exposure Statement Power is so low that no RF exposure calculation
is needed. The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc.
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard
(such as catching fire, explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion; Leaving a battery in an
extremely high temperature surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas; and A battery subjected
to extremely low air pressure that may result in an explosion or the leakage
of flammable liquid or gas.
The symbol indicates DC voltage.
Name: Wireless Headphones
Model: HC306
Weight: 240 g
Earbuds Size: 170 × 192 × 82 mm
Battery Capacity: 720 mAh
Charging time: 80 minutes
Fully Charged Playtime (ANC Off): 70 hours
Fully Charged Playtime (ANC On): 50 hours
Speaker Impedance: 32 Ω
Wireless Range: 10 m
Bluetooth: Bluetooth® 5.0
Bluetooth Protocol: HFP / A2DP / AVRCP Input: 5 V 1.1 A
Maximum Power: 20 mW
Working Temperature: 0 ℃ ~ 45 ℃Frequency Range: 2.400 GHz ~ 2.4835 GHz
Operation Frequency/Max. EIRP: 2402-2480MHz, Max EIRP is 9.61dBm
The specifications are acquired from laboratory tested data.
- The playback time, tested under the laboratory condition of AAC format and 50% volume, may vary with different device setting, environments, usage and other factors.
For users outside mainland China, please download the 1MORE MUSIC APP for product upgrades and additional features.
- APP Ul in user guide may vary and for reference only, please refer to Ul on device.
Manufacturer: Tiinlab Corporation
Add: No. 3333, Liuxian Avenue, Tower A, 35th Floor, Tanglang City,
Nanshan District, Shenzhen, China
CMIIT ID: 2023DP8970
FCC ID: 2ASDI-HC306
IC: 24662-HC306
Product Function Description
Power On: Press and hold for 2S
Power Off: Press and hold for 5S
Playback
Play / Pause: Click
Phone Call
Answer / Hang up: Click
Switch to the mobile phone: Double click Decline: Press and hold for 2S
Voice Assistant (Bluetooth on and not in a call): Double click
ANC ON / Pass-through / ANC OFF (Switch in turn): Click
Volume +: Click
Previous Track: Press and hold for 2S
Volume -: Click
Next Track: Press and hold for 2S
FCC
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. The
SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device
types HC306
( FCC ID: 2ASDI-HC306) has also been tested against this SAR limit.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
This device has been tested for compliance with IC SAR values at a typical
operating near the body. To ensure that RF exposure levels below the levels
tested, use accessories with this equipment to maintain a minimum separation
distance of 0 cm between the body of the user and the device. These
accessories should not contain metallic components. It is possible that the
accessories used close to the body that do not meet these requirements are not
consistent with the SAR limits and it is advisable to avoid using them.
Package Content
Documents / Resources
|
1MORE SonoFlow SE HQ30 Noise Cancelling
Headphones
[pdf] User Guide
HC306, SonoFlow SE HQ30, SonoFlow SE HQ30 Noise Cancelling Headphones, Noise
Cancelling Headphones, Headphones
---|---