Aladdin All-In One Bi-Color LED Panel Kit User Manual
- June 3, 2024
- ALADDiN
Table of Contents
Aladdin All-In-One Bi-Color LED Panel Kit
START-UP GUIDE
Unpack your panel and accessories from the box. The panel features a built-in
dimmer unit which can be controlled on the back of the panel. Plug in your AC
adapter or D-Tap cable to the input box of the panel. If the cable is too
short, just use the included extension cable in between. When you connect the
AC adapter to the power outlet you’re ready to go. If you have also purchased
the optional DMX Attachment (ALL-DMXAT) or the Wired Dimmer (ALL-WDIM) you can
put them between the panel (or extension cable) and the AC adapter (or D-Tap
cable). Just note that you need batteries that can handle the power draw of 70
watts from the panel. There’s a simple calculation for
that:
If you are using 14.8V batteries you need at least a working current of 4.7A. If your battery is rated at 14.8V and 100Wh/6.8Ah you can run your ALL-IN TWO for more than one hour. For any further questions about using our products please refer to our customer service or watch the instructional videos on www .aladdin-lights.com or YouTube.
DOWNLOAD THE APP
Using your ALL-IN panel with the new app for smartphones is a convenient way
of controlling your light. It is available as free download on Android and
iOS. You can store your own color filters in the app by dialing the de-sired
RGB / Bi-Color values, have more control over the hues and saturation of
lighting effects, and much more. Give it a try and you will be amazed about
the convenience in your workflow. Find the QR codes for direct download
below.
IMPORTANT CAUTIONS AND WARNINGS
- Do not use near flammables and heaters.
- Do not expose the unit to direct sunlight for a long period (this applies also for storing in a car).
- Do not use the dimmer wire or extension wire to hang or mount the panel.
- Do not bend or fold the panel more than 90 degrees.
- Do not tape directly on the LEDs of the panel – they can burn out.
- Do not damage the product with improper force or cause any impact with heavy objects.
- Do not cut the panel with sharp objects.
- Keep out of reach of children.
- The panel will heat up when running a long period of time on 100% power, make sure to have it in your eyesight at all times. Use the X-BEND holder or frame to assure enough air flow for heat reduction.
- Use the product only within a temperature range of -10°C – +40°C.
- Make sure the panel has cooled down before storing it in the pouch or any other case.
- When you have technical problems while using the product, stop using it immediately and contact your dealer/reseller.
WARRANTY
We provide a one-year warranty period after the purchase. This warranty covers repairs or a replacement for faulty products within this period. After this warranty has expired, you can still get repairs for your product which will be charged extra. Aladdin Lights reserves the right to refuse warranty service on products under disputable conditions.
WARRANTY EXCLUSIONS
In case of any of the below-listed causes, the warranty does not apply, even
if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to the usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors.
SELECTED OPTIONAL ACCESSORIES
- The ALL-IN Series con-troller allows you more control over the RGB and Bi-Color values as well as effect values and DMX.
- Frame with ball head and diffuser for easy installation and more sturdiness.
- Aladdin Ball with a diffuser for softer and round lighting.
TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>