Aladdin FABRIC-LITE 35 Bi Color LED Panel User Manual
- June 3, 2024
- ALADDiN
Table of Contents
Aladdin FABRIC-LITE 35 Bi Color LED Panel
START-UP GUIDE
- Metal ring for mounting (can be attached to magnets)
- Velcro
- Connector plug
Unpack your panel and accessories from the kit. Plug in the panel connetor to your dimmer-unit. Use the extansion in between if needed. IPlug in your dimmer-unit to a power outlet. Instead of using the power outlet, there’s an integrated V-Mount or Gold-Mount plate on top of the dimmer. You can use batteries from 12-30V DC.
Just note that you need batteries which can handle the power draw of 350 watts
from the panel. There’s a simple calculation for that:
If you are using 14.8V batteries you need at least a working current of 23.6A.
If your battery is rated at 14.8V and 200Wh/13.5Ah with a working current of
13.5A you can run your FABRIC-LITE 35 for half an hour. For any further
questions about using our products please refer to our customer service or
watch the instructional videos on www.aladdin-lights.com or YouTube.
IMPORTANT CAUTIONS AND WARNINGS
- Do not use near flammables and heaters.
- Do not expose the unit to direct sunlight for a long period (applies also for storing in a car).
- Do not use the dimmer wire or extension wire to hang or mount the panel.
- Do not bend or fold the panel more than 90 degrees.
- Do not tape directly on the LEDs of the panel – they can burn out.
- Do not damage the product with improper force or cause any impact with heavy objects.
- Do not cut the panel with sharp objects.
- Keep out of reach of children.
- The panel will heat up when running a long period of time on 100% power, make sure to have it in your eyesight at all times. Use the frame to assure enough air flow for heatreduction.
- Use the product only within the temperature range of -10°C – +40°C.
- Make sure the panel has cooled down before storing it in the pouch or any other case.
- When you have technical problems while using the product, stop using it immediately and contact your dealer/reseller.
WARRANTY
We provide a one year warranty period after the purchase. This warranty covers
repairs or a replacement for faulty products within this period. After this
warranty has been expired, you can still get repairs for your product which
will be charged extra. Aladdin Lights reserves the right to refuse warranty
service on products under disputable conditions.
WARRANTY EXCLUSIONS
In case of any of the below listed causes, the warranty does not apply, even
if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors.
SELECTED OPTIONAL ACCESSORIES
TECHNICAL SPECIFICATIONS
- Light source 350W Bi-Color LEDs
- CRI Ra 97
- TLCI 98
- Color temperature 3000K – 6000K
- Beam angle 140°
- Dimmer Dimming: (0.5%–100%)
- Cooling Passive cooling
- Dimmer input 12V to 30VDC
- Power unit input Automatic voltage 100V to 240VAC
- Power consumption 350W
- Dimensions 900mm (W) x 900mm (H) x 5mm
- Weight 1200g
- Connection Connector plug
- Temperature range -10°C – +40°C
- DMX512 support With dimmer unit (in/out)
- DMX512 2 Channels – White Bi-Color
- Material Fabric
- IP-Rating 32
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>