Aladdin ALL-DMXAT Bi Color RGB User Manual

: June 1, 2024
: ALADDiN

Table of Contents

Aladdin ALL-DMXAT Bi Color RGB
Product Usage Instructions
Frequently Asked Questions
START-UP GUIDE
DOWNLOAD THE APP
WARNINGS
SELECTED OPTIONAL ACCESSORIES
TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Aladdin ALL-DMXAT Bi Color RGB

Aladdin-ALL-DMXAT-Bi-Color-RGB-produt

Technical Specifications

Light source: 100W Bi-Color / 40W RGB LEDs
CRI: Ra 98
TLCI: 98
Color temperature: 2200K – 12000K
Beam angle: [SPECIFICATION MISSING]

Product Usage Instructions

1. Setup

Unpack the panel and accessories.
Locate the built-in dimmer unit on the back of the panel.
Plug in the AC adapter or D-Tap cable to the input box of the panel.
If needed, use the included extension cable.
Connect the AC adapter to a power outlet.

2. Additional Accessories

If you have purchased the optional DMX Attachment (ALL-DMXAT) or Wired Dimmer (ALL-WDIM), place them between the panel (or extension cable) and the power source.

3. Power Requirements

Ensure your batteries can handle a power draw of 140 watts from the panel. Use the provided calculation to determine the minimum working current needed based on battery voltage.

4. Battery Usage

If using a 14.8V battery rated at 100Wh/6.8Ah, you can power the ALL-IN TWO for approximately an hour.

5. App Control

Download the app for convenient light control on Android and iOS devices. Customize color filters, adjust RGB/Bi-Color values, and enhance lighting effects with ease.

Frequently Asked Questions

Q: What is the warranty coverage for the product?
- A: The product comes with a one-year warranty covering repairs or replacements for faulty items. After the warranty period, repair services are available at an additional cost.
Q: Are there any excluded warranty conditions?
- A: Yes, warranty does not apply in cases of consumer negligence, use of incompatible power sources, or disassembly by unauthorized resellers/distributors.
Q: What are some recommended optional accessories?
- A: Consider accessories like ALL-WDIM for enhanced control over color values and effects, 1X2-FR-KIT for easy installation, and 1X2-BALL for softer lighting.

START-UP GUIDE

$Aladdin-ALL-DMXAT-Bi-Color-RGB-fig $1$$

1	Switch between RGB and Bi-Color control
2	Dimming control
3	Color temperature control
4	Metal corner (can be attached to magnets)
5	Velcro
6	Input box
7	Metal ring for mounting (can be attached to magnets)

Unpack your panel and accessories from the box. The panel features a builtin dimmer unit which can be controlled on the back of the panel. Plug in your AC adapter or D-Tap cable to the input box of the panel. If the cable is too short, just use the included extension cable in between. When you connect the AC adapter to the power outlet you’re ready to go. If you have also purchased the optional DMX Attachment (ALL-DMXAT) orthe Wired Dimmer (ALL-WDIM) you can put them between the panel (or extension cable) and the AC adapter (or D-Tap cable). Just note that you need batteries which can handle the power draw of 140 watts from the panel. There’s a simple calculation for that: $Aladdin-ALL- DMXAT-Bi-Color-RGB-fig $2$$

If you are using 14.8V batteries you need at least a working current of 9.5A.

If your battery is rated at 14.8V and 100Wh/6.8Ah you can run your ALL-IN TWO for a little less than one hour. For any further questions about using our products please refer to our customer service or watch the instructional videos on www.aladdin-lights.com or YouTube.

DOWNLOAD THE APP

Using your ALL-IN panel with the new app for smartphones is a convenient way of controlling your light. It is available as free download on Android and iOS. You can store your own color filters in the app by dialling the desired RGB / Bi-Color values, have more control over the hues and saturation of lighting effects and much more. Give it a try and you will be amazed about the convenience in your workflow. Find the QR-codes for direct download below . $Aladdin-ALL-DMXAT-Bi-Color-RGB-fig $3$$ $Aladdin- ALL-DMXAT-Bi-Color-RGB-fig $4$$

WARNINGS

IMPORTANT CAUTIONS AND WARNINGS

Do not use near flammables and heaters.
Do not expose the unit to direct sunlight for a long period (applies also for storing in a car).
Do not use the dimmer wire or extension wire to hang or mount the panel.
Do not bend or fold the panel more than 90 degrees.
Do not tape directly on the LEDs of the panel – they can burn out.
Do not damage the product with improper force or cause any impact with heavy objects.
Do not cut the panel with sharp objects.
Keep out of reach of children.
The panel will heat up when running a long period of time on 100% power, make sure to have it in your eyesight at all times. Use the X-BEND holder or frame to assure enough air flow for heat reduction.
Use the product only within temperature range of -10°C – +40°C.
Make sure the panel has cooled down before storing it in the pouch or any other case.
When you have technical problems while using the product, stop using it immediately and contact your dealer/reseller.

WARRANTY

We provide a one year warranty period after the purchase. This warranty covers repairs or a replacement for faulty products within this period. After this warranty has been expired, you can still get repairs for your product which will be charged extra. Aladdin Lights reserves the right to refuse warranty service on products under disputable conditions.

WARRANTY EXCLUSIONS

In case of any of the below listed causes, the warranty does not apply, even if it is within the free warranty period.