Aladdin ALL-IN-2 Bi-Color Kit User Manual

: June 3, 2024
: ALADDiN

Table of Contents

Aladdin ALL-IN-2 Bi-Color Kit
START-UP GUIDE
DOWNLOAD THE APP
IMPORTANT CAUTIONS AND WARNINGS
WARRANTY
WARRANTY EXCLUSIONS
SELECTED OPTIONAL ACCESSORIES
TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Aladdin ALL-IN-2 Bi-Color Kit

START-UP GUIDE

Aladdin ALL-IN-2 Bi-Color Kit 1

Switch between RGB and Bi-Color control
Dimming control
Color temperature control
Metal corner (can be attached to magnets)
Velcro
Input box
Metal ring for mounting (can be attached to magnets)

Unpack your panel and accessories from the box. The panel features a built-in dimmer unit which can be controlled on the back of the panel. Plug in your AC adapter or D-Tap cable to the input box of the panel. If the cable is too short, just use the included extension cable in between. When you connect the AC adapter to the power outlet youâ€™re ready to go. If you have also purchased the optional DMX Attachment (ALL-DMXAT) or the Wired Dimmer (ALL- WDIM) you can put them between the panel (or extension cable) and the AC adapter (or D-Tap cable). Just note that you need batteries which can handle the power draw of 140 watts from the panel. Thereâ€™s a simple calculation for that:

Aladdin ALL-IN-2 Bi-Color Kit 2

If your battery is rated at 14.8V and 100Wh/6.8Ah you can run your ALL-IN TWO for a little less than one hour.
For any further questions about using our products please refer to our cus- tomer service or watch the instructional videos on www.aladdin-lights.com or YouTube.

DOWNLOAD THE APP

Using your ALL-IN panel with the new app for smartphones is a convenient way of controlling your light. It is available as free download on Android and iOS. You can store your own color lters in the app by dialling the desired RGB / Bi-Color values, have more control over the hues and sat-uration of lighting effects and much more. Give it a try and you will be amazed about the convenience in your workï¬‚ow. Find the QR-codes for direct download below.

Aladdin ALL-IN-2 Bi-Color Kit 3

IMPORTANT CAUTIONS AND WARNINGS

Do not use near ﬂammables and heaters.
Do not expose the unit to direct sunlight for a long period (applies also for storing in a car).
Do not use the dimmer wire or extension wire to hang or mount the panel.
Do not bend or fold the panel more than 90 degrees.
Do not tape directly on the LEDs of the panel – they can burn out.
Do not damage the product with improper force or cause any impact with heavy objects.
Do not cut the panel with sharp objects.
Keep out of reach of children.
The panel will heat up when running a long period of time on 100% pow-er, make sure to have it in your eyesight at all times. Use the X-BEND holder or frame to assure enough air ﬂow for heat reduction.
Use the product only within temperature range of -10°C – +40°C.
Make sure the panel has cooled down before storing it in the pouch or any other case.
When you have technical problems while using the product, stop using it immediately and contact your dealer / reseller.

WARRANTY

We provide a one year warranty period after the purchase. This warranty covers repairs or a replacement for faulty products within this period. After this warranty has been expired, you can still get repairs for your product which will be charged extra. Aladdin Lights reserves the right to refuse warranty service on products un-der disputable conditions.