Aladdin ALL-WDIM All In Controller with Lumenradio and DMX User Manual
- June 1, 2024
- ALADDiN
Table of Contents
Aladdin ALL-WDIM All-In Controller with Lumenradio and DMX
Technical Specifications
- Article code: ALL-WDIM
- Compatibility: ALL-IN-ONE, ALL-IN TWO
- Dimmer: 2 Channels – White Bi-Color / 3 channels RGB
- Cooling: Passive cooling
- Dimensions: 160mm (W) x 50mm (H) x 40mm (D)
- Weight: 140g
- Temperature range: 2200K – 12000K
- DMX512 support: IN&OUT (5-pin) / Lumenradio
- Dimming range: 0.5% – 100%
- IP-Rating: 24
Product Usage Instructions
Primary Functions
- Blackout
- Reset all panels
- Unlink Lumenradio
- Dial accuracy selection
- Bi-Color mode
- RGB mode
- HSI mode
- Filter mode
- Effect mode
- Lock / Unlock
Frequently Asked Questions (FAQ)
Q: How do I switch between DMX and Lumenradio modes?
A: Use the F1 dial to select between CABLE and LUMENRADIO, then press to confirm your choice.
Q: What is the dimming range of the Aladdin ALL-IN CONTROLLER?
A: The dimming range is from 0.5% to 100%.
START-UP GUIDE
| 1 | Buttons for principal functions |
|---|---|
| 2 | DMX IN/OUT (5-pin) |
| 3 | Output to panel |
| 4 | LED display |
| 5 | Power input socket (D-Tap or AC Adapter) |
| 6 | F1 – Dial with push button for multiple functions |
| 7 | F2 – Dial with push button for multiple functions |
| 8 | F3 – Dial with push button for multiple functions |
Primary Functions
| Blackout | Press F1 for 3 seconds |
|---|---|
| Reset all panels | Press F2 for 3 seconds |
| Unlink Lumenradio | Press F3 for 3 seconds |
| Dial accuracy selection | Press any dial shortly |
| Bi-Color mode | Press WHITE |
| RGB mode | Press RGB |
| HSI mode | Press HSI |
| Filter mode | Press FILTER |
| Effect mode | Press EFFECT |
| Lock / Unlock | Press any button for 3 seconds |
Secondary Functions
Controls in BI-COLOR mode
| F1 | Controls intensity |
|---|---|
| F2 | Controls color temperature |
| F3 | Controls green and magenta (+ / -) |
Controls in RGB mode
| F1 | Controls intensity of red |
|---|---|
| F2 | Controls intensity of green |
| F3 | Controls intensity of blue |
Controls in HSI mode
| F1 | Controls hue from 0 – 360° |
|---|---|
| F2 | Controls saturation |
| F3 | Controls intensity |
Controls in FILTER mode
| F1 | Turn the dial for filter selection, press to select |
|---|---|
| F2 | Turn the dial for slot selection, press to save settings |
| F3 | Turn the dial for load slot selection, press to load |
Controls in EFFECT mode
| F1 | Turn the dial to select effect, press to select |
|---|---|
| F2 | Turn the dial to control effect speed (from 50%-100%) |
| F3 | Turn the dial to control the effect intensity |
Controls in DMX mode
F1
| Turn the dial to select between CABLE and LUMENRADIO, and press to select
---|---
F2| Set DMX channel from 10 to 510
F3| Set DMX channel from 1 to 9
Unlink Lumenradio| Press F3 for 3 seconds
IMPORTANT CAUTIONS AND WARNINGS
- Do not use near flammables and heaters.
- Do not expose the unit to direct sunlight for a long period (this applies also for storing in a car).
- Do not damage the product with improper force or cause any impact with heavy objects.
- Keep out of reach of children.
- Use the product only within the temperature range of -10°C – +40°C.
- When you have technical problems while using the product, stop using it immediately and contact your dealer/reseller.
ADDITIONAL NOTES
- When the unit is connected to the panel, it is not possible to access the panel via bluetooth (mobile app). Therefore please remove the unit to have full access via the app.
WARRANTY
- We provide a one-year warranty period after the purchase. This warranty covers repairs or a replacement for faulty products within this period. After this warranty has expired, you can still get repairs for your product which will be charged extra.
- Aladdin Lights reserves the right to refuse warranty service on products under disputable conditions.
WARRANTY EXCLUSIONS
- In case of any of the below-listed causes, the warranty does not apply, even if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors.
TECHNICAL SPECIFICATIONS
| Article code | ALL-WDIM |
|---|---|
| Compatibility | ALL-IN-ONE, ALL-IN TWO |
| Dimmer | Dimming: (0.5%–100%) |
| Cooling | Passive cooling |
| Dimensions | 160mm (W) x 50mm (H) x 40mm (D) |
| Weight | 140g |
| Temperature range | -10°C – +40°C |
| DMX512 support | IN&OUT (5-pin) / Lumenradio |
| DMX512 | 2 Channels – White Bi-Color / 3 channels RGB |
| Dimming range | 0.5% – 100% |
| Temperature range | 2200K – 12000K |
| IP-Rating | 24 |
- www.aladdin-lights.com
- PICTURE BY FAUZEE NASIR
- User Manual
- Version: 5. February 2024, 4:58 PM
- Aladdin Lightsinfo@aladdin-lights.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>