CHERUB WST-2046BD Clip On Tuner Owner’s Manual

CHERUB WST-2046BD Clip On Tuner

Product Description

Features

• Auto Power Off Function: The device will turn off automatically if there is no signal present or operation in 5 minutes.
• Note Detection: Chromatic, Guitar, Bass, Violin, Ukulele C, Ukulele D.
• Settings: saved upon powering off.

Operation

1. Press POWER/MODE for 2 seconds to turn on/off. The WST-2046 will turn on to the last setting. The default tuning mode is Chromatic when first powering on this tuner.
2. Press A4/FLAT briefly to set A4: 430~450Hz. (BD RC Only)
3. Press A4/FLAT for 2 seconds set Flat: b bb. (BD RC Only) (This is only available in Guitar and Bass mode.)
4. Press POWER/MODE briefly to set mode: C(Chromatic), (Guitar), B(Bass), V(Violin), U-C(Ukulele C), U-D(Ukulele D).
5. Play a single note on your instrument. The display will show the name of the note and the string number closest to the pitch detected by the CLIP. Tune your instrument until the LCD shows the correct string and note name.
   • b. Note Detection:
   • Chromatic: C CD E’E F FG G*A B’ B
   • Guitar: 6E 5A 4D 3G 2B 1E
   • Bass: LB 4E 3A 2D 1G HC
   • Violin: 4G 3D 2A 1E
   • Ukulele C: 4G 3C 2E 1A
   • Ukulele D: 4A 3D 2F* 1B

Installing the battery

When the battery charge is low, the LCD will become dim. Please replace the battery as soon as possible.

Specifications

• Tuning scale: Chromatic, Guitar, Bass, Violin, Ukulele C, Ukulele D
• Tuning range: A,(27.5Hz) ~C,(4186.0Hz)
• A4: 430Hz~450Hz(BD RC Only) 440Hz(WZ Only)
• Flat: b bb (BD RC Only)
• Precision: +1 cent
• Power: 3V (CR2032 lithium battery)
• Dimensions: 50(W)x36(D)x30(H)mm
• Weight: 32g

Precautions

• Environment:

1. Do NOT use the tuner in high temperature, high humidity, or subzero environments.
2. Do NOT use the tuner in direct sunlight.
  * Please do NOT disassemble the tuner by yourself.
  * Please keep this manual for future reference.

Accessories

• Owner’s manual
• 3V(CR2032) Lithium battery

FCC

THE FCC REGULATION WARNING (for U.S.A.)

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning  the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CE mark for European Harmonized Standards

• CE Mark which is attached to our company’s products of Battery mains the product is in full conformity with the harmonized standard(s) EN 61000-6-3:2007+A1:2011 & EN 61000-6-1:2007
• Under the Council Directive 2004/108/ EC on Electromagnetic Compatibility.

CONTACT

• © 2014 Cherub Technology-All rights reserved.
• No part of this publication may be reproduced in any form without prior written permission of Cherub Technology.
• www.cherubtechnology.com.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>