comsol PML10XX 10000mAh Dual Power Bank Charger User Manual
- June 3, 2024
- comsol
Table of Contents
Model: PML10XX
10000mAh Dual Port Power Bank Charger
User Manual v1.1
Power Bank Layout
- USB-A output 2
- USB-C input
- USB -A output 1 O Power on/off
- Digital Capacity LED
Suitable for
- iPhone/iPad/iPod
- Most smartphones including Samsung, Huawei, Google, LG Moto, Sony, Oppo, Xiaomi, OnePlus, Nokia, Telstra & more
- Smartwatches, fitness trackers, digital cameras, Bluetooth headphones, portable gaming consoles, eReaders, drones
Features
- Battery type: Lithium-Polymer
- 10000mAh provides 360% extra battery for an average smartphone*
- Get an extra 24 hours of web surfing on an iPhone Xs or 20 hours on a Samsung Galaxy S10
- Digital LED display to indicate remaining capacity
- Dual USB ports for simultaneous charging of 2 devices
- Smart Power Chip identifies your device and provides maximum power for speedy charging times
- 2A high output for fast charging of iPad or tablet
- Rechargeable more than 500 times
- Includes 30cm USB-A to USB-C cable to charge power bank
- Built-in over charging and short circuit protection
- Watt Hour Rating: 37Wh
- USB-C Input: DC 5V 2A
- USB-A Output 1: DC 5V 2A
- USB-A Output 2: DC 5V 2A
- Total Output: 10W
- Charging Time: 4 to 8 hours depending on charger output
- Size: 91.2mm (L) x 63.8mm (W) x 23.7mm (H)
- Weight: 176g
- Certifications: RCM, RoHS, UN38.3
To Charge Power Bank
- To charge the power bank, use the included USB-A to USB-C cable and connect the USB-C input port on the power bank to a USB wall charger
- During charging the digital LED display will flash to indicate charging capacity status
- When charging is complete the digital LED display will show 100
To Charge Phone or USB Device
- Using your phone or other USB device’s charging cable, connect the USB-A connector to either output 1 or output 2 port on the power bank
- Connect the other end of the cable to your device
- Charging should commence automatically
- If charging doesn’t start, press the On/Off button to start charging
- If your phone or device uses a USB-C port, then you can also use the included cable to charge your device
- When your phone or device is fully charged, the power bank will automatically turn itself off
To Check Remaining Capacity
- Press On/Off button and the digital LED display will show the percentage remaining capacity
- The display will turn off automatically after about 30 seconds
Important Safety Instructions
-
To maximize battery life span, fully charge power bank before first use for 6 to 8 hours
-
Store power bank in a cool and dry place.
-
Do not store power bank in hot or humid environment
-
Operating temperature should be between -10c to 45c
-
If power bank is not used for long periods of time, you should charge and discharge once every three months
-
When charging a device, the power bank may feel warm, this is a normal operating condition and should not be cause for concern
-
In normal conditions, the battery performance will decline over several years
-
Do not dispose of power bank in heat or fire
-
Do not clean power bank with harmful chemicals or detergents
-
Misuse, dropping or excessive force may cause product damage
-
360% extra battery based on an iPhone 8 with 1821 mAh battery iPhone, iPad and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. USB-C is a trademark of USB Implementers Forum.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>