LOCK ER DOWN LD2025EX Floor Console and Shifter Instruction Manual
- June 3, 2024
- LOCK ER DOWN
Table of Contents
Security Products
INSTALLATION INSTRUCTIONS
LD2025/LD2025EX
[2009 to 2014 Ford F150 with Floor Console and Shifter in the Column]
Instruction Manual
LD2025EX Floor Console and Shifter
-
For any combination style lock, it is a good idea to set the combination before installing the safe. We recommend that the combination be set with the DOOR OPEN in order to test the lock combination effectively without locking yourself out.
-
Clear out the contents of the center console for now
-
This safe comes fully assembled and must be disassembled before installment. To do so, remove the front and rear brackets by unscrewing the 8/32 acorn nuts using a 5/16” (or 8mm) socket wrench (keep these acorn nuts as they are needed for installment later)
-
Place the TOP ASSEMBLY onto the top lip of the console compartment as shown in the installment image.
-
Place the FRONT BRACKET over the front two studs (front bracket is the one with the gap where the trough of the top assembly would insert) and use the acorn nuts removed from step 3 to secure the bracket in place.
a. Make sure to squeeze the bracket towards the top assembly to ensure a secure fit! -
Repeat STEP 5 for the rear brackets, ensuring that a secure fit is achieved by squeezing the bracket towards the top assembly.
-
Make sure the acorn nuts are tight. DO NOT OVER TIGHTEN, THIS COULD DAMAGE THE CONSOLE.
-
Enjoy your purchase!
Tools Needed:
- IMPACT DRILL or SOCKET WRENCH
- 8mm Socket bit
