INTEGRA V12 Vacusafe Aspiration System Instruction Manual
- June 3, 2024
- Integra
Table of Contents
INTEGRA V12 Vacusafe Aspiration System
Equipment Disposal
The VACUSAFE device must not be disposed of with unsorted municipal waste.
Dispose of the VACUSAFE device in accordance with the laws and regulations in
your area governing the disposal of devices.
Technical data
- Vacuum range: -300 to -600 mbar, continuously adjustable
- Flow rate: Pump: 8 l/min (air); Aspiration: 17 ml/s (liquid, aspiration pipette)
- Dimensions (H x W x D): 530 x 180 x 320 mm
- Weight: 3.4 kg
- Electricity supply:
- Mains adapter input: 100–240 VAC, 50/60 Hz
- Device input: 17–19 VDC, 15 W
- Degree of protection: IP21
- Ambient conditions:
- Operation:
- 5 to 40°C, max. 80% RH (non-condensing) Storage:
- -10 to 40°C, max. 95% RH (non-condensing)
Chemical compatibility
The table below lists VACUSAFE parts that come into contact with the aspirated liquid or its aerosols and vapors, and rates the compatibility of these parts to a few of the chemicals commonly used in laboratories. To determine the compatibility of a component to a chemical not listed in the table, please consult one of the several tables available on the internet.
Note that the rating refers to soaking in the concentrated chemical; however, more relevant here is the attenuated effect resulting from indirect contact with the diluted chemical. It is recommended to test the compatibility of relevant components to a specific chemical prior to extensive use. INTEGRA Biosciences AG does not warrant that the information in the table is accurate or complete and that any material is suitable for any purpose.