Integra DRX-5.2 AV Receiver Instruction Manual
- June 16, 2024
- Integra
Table of Contents
Integra DRX-5.2 AV Receiver
Specifications
- Model: DRX-5.2
- Serial Number: 29403397
- H1804-0
Product Information
The DRX-5.2 is an AV receiver designed to provide high-quality audio and video performance. It supports a 7.1 channel speaker system and offers various connectivity options, including HDMI, digital optical, and LAN. The receiver also features HDMI CEC and HDMI Standby Through functions for convenient control and operation.
Product Usage:
Install & Connections:
-
Refer to the instruction manual available on our website to install and connect speaker systems other than 7.1 ch. (Manual Link)
-
Connect the front speakers (1, 2), center speaker (3), surround speakers (4, 5), powered subwoofer (6), and surround back speakers (7, 8) according to the provided diagram.
-
Make sure to use speaker cables (a) and subwoofer cables (b)
for the connections. Refer to the instruction manual for detailed instructions on cable installation. -
If any of the connected speakers have an impedance of 4Ω or more to less than 6Ω, you need to make some settings in the Setup menu after completing the Initial Setup. Press the remote controller’s button, select 2. Speaker – 1. Configuration, and set Speaker Impedance to 4ohms.
-
Ensure that the exposed wires of the speakers do not stick out of the speaker terminals when connecting to avoid any electrical issues.
-
For HDMI connections, choose an HDMI IN jack on the TV that supports ARC (Audio Return Channel). Settings are required to use the ARC function. Select “Yes” for ARC Setup in Initial Setup.
-
If connecting the unit to a wired LAN, use an Ethernet cable to connect it to the ETHERNET port.
-
Switch the input on the TV to the one assigned to the unit. Follow the guidance displayed on the screen to complete the Initial Setup.
-
If you selected “No, Skip” in ARC Setup of Initial Setup, it is necessary to press the button on the remote controller and execute 6. Hardware – 1. HDMI setting after completing Initial Setup to enable HDMI CEC & HDMI Standby Through function.
Troubleshooting Remote Controller:
If your remote controller is not functioning properly or has switched to ZONE control mode, follow these steps:
-
While pressing and holding the Mode button, press the Main
button for 3 seconds or more until the remote indicator blinks once. -
Switch the remote controller to the main room control mode.
FAQ:
Q: How can I redo the initial setup?
A: To redo the initial setup, go to 8. Miscellaneous in the menu and select 4. Initial Setup.
Q: How do I set up my speakers?
A: During the initial setup, select the number of speakers you have and follow the instructions provided on the screen. You can also refer to the instruction manual for detailed speaker setup.
Q: Where can I find the complete user manual?
A: The complete user manual is available on our website at https://manual- hub.com/.
DIMENSION
http://integraworldwide.com/manual/drx52/top.pdf
Install & Connections
- Used during Initial Setup.
- Connect speakers with 4 Ω to 16 Ω impedance. If any of the connected speakers have an impedance of 4 Ω or more to less than 6 Ω, after completing “Initial Setup”, you need to make some settings in the Setup menu. Press on the remote controller, select “2. Speaker” – “1. Confi guration” and set “Speaker Impedance” to “4ohms “.
- Make sure the exposed wires of the speakers do not stick out of the speaker terminals when connecting. If the exposed wires of the speakers touch the rear panel or the + and – wires touch each other, the protection circuit will be activated.
- Choose an HDMI IN jack on the TV that supports ARC when connecting. Settings are required to use the ARC function. Select “Yes” for “ARC Setup” in “Initial Setup”.
- If you connect this unit to the network using wired LAN, connect an LAN cable to the ETHERNET port.
- Switch the input on the TV to that assigned to the unit. Complete the Initial Setup according to the guidance displayed on the screen.
Enable HDMI CEC & HDMI Standby Through function: If you selected “No, Skip” in “ARC Setup” of “Initial Setup”, after completing “Initial Setup”, it is necessary to press the button on the remote controller and execute “6. Hardware” – “1.HDMI” setting.
Tips
Troubleshoot your remote controller
The remote controller may have switched to the ZONE control mode. While pressing and holding Mode, press the Main button for 3 seconds or more until the remote indicator blinks once, and then switch it to the main room control mode.
Initial Setup with Auto Start-up Wizard
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>