3M 7E50 Series CF Card Ejector and Latching Retainer Instruction Manual
- June 4, 2024
- 3M
Table of Contents
3M 7E50 Series CF Card Ejector and Latching Retainer
INSTALLATION
- Mounts to 3M’s CompactFlash™ Type II, Long Guide, Surface Mount Headers
- Modular “snap on” design and multiple button types for design flexibility
- Can be used with either top or bottom mount (normal or inverse polarization) headers
- Latching retainer is used with normal polarization 3M’s Compact Flash™ Type II headers
- Latching Retainer can be also used with 3M™ Connector for CFast™ Card
- Latching Retainer provides enhanced retaining strength to the card and keeps it in place under high vibration environment
- Can be preassembled to the connector to reduce handling and assembly time
- Meets CFA standards for known compatibility and reliability
- RoHS Compliant. See the Regulatory Information Appendix (RIA) in the “RoHS Compliance” section of www.3Mconnector.com for compliance information (RIA E1 and C1 apply)
Physical
Button
- Material: Glass-filled high-temperature thermoplastic
- Flammability: UL 94V-0
- Color: Black
Frame
Material: Stainless steel
Environmental
- Process Rating: 260°C (per J-STD-020C)
CompactFlash™ Header, Type II 7E50 Series
Notes:
- Used in combination with N7E50-M516XX-40 Type II Compact Flash Header. See TS-2083
- See TS-2083 for board footprint information
- Can be used with normal or inverse mounting/polarization.
Important Notice
All statements, technical information, and recommendations related to 3M’s
products are based on information believed to be reliable, but the accuracy or
completeness is not guaranteed. Before using this product, you must evaluate
it and determine if it is suitable for your intended application. You assume
all risks and liability associated with such use. Any statements related to
the product which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have no force or
effect unless expressly agreed upon, in writing, by an authorized officer of
3M.
Warranty; Limited Remedy; Limited liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>