anslut 019394 Solar Panel Instruction Manual
- June 3, 2024
- anslut
Table of Contents
anslut 019394 Solar Panel Instruction Manual
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference.
(Translation of the original instructions)
JULA AB, BOX 363, SE-532 24 SKARA
2022-01-07
© Jula AB
SAFETY INSTRUCTIONS
Read these instructions carefully before installation and use, and save them for future reference.
- The solar panel generates voltage when exposed to light. Follow all the relevant electrical safety regulations.
- The product must only be installed and maintained by qualified personnel.
- Pay attention to high DC voltages when connecting solar panels.
- Avoid scratching or otherwise damaging the back of the panel.
SYMBOLS
| Read the instructions.
---|---
| Approved in accordance with the relevant directives
| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
| Rated voltage | 18, 4 V |
|---|---|
| Solar cell type | Monocrystalline |
| Output | 60 W |
| Current | 3.26 A |
| Size | 680 x 536 x 25 mm |
| Weight | 4.3 kg |
DESCRIPTION
- The product is made of hardened glass. The Aluminium frame is reinforced with corner protection. The product can be used for both temporary and permanent installation.
FEATURES
- A robust and rigid monocrystalline solar panel with cost-effective and easy to use digital charging regulator with pulse width modulation.
- 3-stage intelligent PWM charging – boost charging, peak/equalization charging and trickle charging.
- 3 battery alternative – sealed, gel and wet-cell battery
- Battery temperature compensation.
- Convenient and intuitive user interface.
- USB port for charging electronic equipment.
- Button setting of battery type and load output.
- Comprehensive electronic safety functions.
WARNING!
-
The solar panel generates voltage when exposed to light. Follow all the relevant electrical safety regulations.
-
The product must only be installed and maintained by qualified personnel.
-
Pay attention to high DC voltages when connecting solar panels.
-
Avoid scratching or otherwise damaging the back of the panel.
INSTALLATION
SELECT A SUITABLE PLACE TO INSTALL
- Choose a position for installation with as much direct solar radiation and as many unshadow hours of sunlight per day as possible.
- External factors such as the intensity of the solar radiation, shadowing at the installation point, fouling, snow and the ambient temperature, can also affect the performance of the solar panel.
- The efficiency of the solar panel decreases over time – this is completely normal and not a malfunction.
INSTALL SOLAR PANEL
Installation can be carried out in several different ways. Do not install the solar panel where sunlight is blocked. The solar panel has pre-drilled holes for hanging from hooks or a line.
CONNECT TO ELECTRICAL SYSTEM
Example
Up to 2 x 60 W solar panels can be connected to the same circuit. The figures show two examples of how the product can be connected electrically. There are also many other ways of designing solar energy systems.
FIG. 1
FIG. 2
NOTE:
- Never connect two solar panels in parallel.
Documents / Resources
|
anslut 019394 Solar
Panel
[pdf] Instruction Manual
019394 Solar Panel, 019394, Solar Panel, Panel
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>