SEALEY 9136XL Super Cool Hide Gloves Instruction Manual

: August 16, 2024
: SEALEY

Table of Contents

SEALEY 9136XL Super Cool Hide Gloves
Product Specifications
FAQ
INTRODUCTION
SAFETY
APPLICABLE STANDARDS
MAINTENANCE
Contacts
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY 9136XL Super Cool Hide Gloves

SEALEY-9136XL-Super-Cool-Hide-Gloves-PRODUCT

Product Specifications

Model: 9136L, 9136XL
Material: Full grain cowhide
Features: Breathable back, elasticated wrist
Standards: Conforms to BS EN ISO 21420:2020 and BS EN388:2016 +A1:2018 – Levels 1143X

FAQ

Q: Can these gloves be used near fire?
- A: No, the gloves should not be in contact with fire to prevent damage or injury.
Q: How should I store the gloves?
- A: Store the gloves in their original packaging in clean, ventilated premises at normal temperature and humidity for optimal performance.
Q: Are these gloves suitable for use near moving machine parts?
- A: No, gloves should not be worn when there is a risk of entanglement by moving parts of machines to ensure safety.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

REFER TO INSTRUCTIONS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

INTRODUCTION

Full grain cowhide. Breathable back, with an elasticated wrist. Supple, hard- wearing premium glove. Conforms to BS EN ISO 21420:2020 and BS EN388:2016 +A1:2018 – Levels 1143X.

Sizes: 9136L (Large) 9136XL (Extra Large)
Test Report no: 7925,7895
Type Examination Certificate Number: EC/4931/21

SAFETY

Users should be warned that gloves should not be worn when there is a risk of entanglement by moving parts of machines.
This model does not contain any substances at levels that are known to, or suspected to, adversely affect user hygiene or health.
The protection against risks or hazards which are not mentioned in this document is not warranted.
The levels of performance mentioned are only valid for the palm of the glove.
These levels of performance are obtained from the tests done according to the conditions defined by the applicable standards.
This glove shall not be in contact with fire.
When stored in appropriate conditions, performance of this product will not be significantly reduced.
For gloves with two or more layers of material, the performance levels are warranted only for the whole glove.
For gloves with two or more layers the overall classification does not necessarily reflect the performance of the outermost layer.

APPLICABLE STANDARDS

SEALEY-9136XL-Super-Cool-Hide-Gloves-FIG-2..

MAINTENANCE

STORAGE

Store the gloves in their original packaging,in normal temperature and humidity conditions in clean ventilated premises.
When stored in appropriate conditions, performance of this product will not be significantly reduced.
The design performance can not be significantly affect by ageing when stored in appropriate conditions (humidity,temperature,clean,ventilated light.

This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty