LATICRETE DS-BC-HF0723 Mortar UT HF Instruction Manual

LATICRETE DS-BC-HF0723 Mortar UT HF

Product Information

• Product Name: Mortar UT HF
• Model Number: DS-BC-HF0723
• Manufacturer/Distributor: LATICRETE South East Asia Pte Ltd
• Address: No. 38 Sungei Kadut Street 2 (Level 2, A3), Singapore 729245

Contact Information:

• Telephone: +65 6515 3028
• Fax: +65 6515 3037
• Email: enquiry@laticrete.com.sg
• Website: se.laticrete.com

Packaging:

• Part A: 3 kg
• Part B: 3 kg
• Part C: 14 kg
• Part D: 12 kg
• A complete set packaging: 32.0 kg

Colours Available: Red, Green, Cream, Light Grey, Dark Grey, Brown Beige

Standards/Certifications:

• ASTM C942
• ASTM D638-14
• ASTM C348 : 2002
• BS EN 1770 : 1998

Product Usage Instructions

Substrates:

• Over Concrete
• Polymer modified screed

Features/Benefits:

• Suitable for hygienic hot water steaming clean
• Hard wearing with good abrasion resistance
• High chemical resistance against alkaline, acids, bases

Recommended Uses:

• GMP, HACCP-compliant hygienic industrial floors
• Abbatoir
• Dry/wet food processing, beverage, seafood, meat production
• Central kitchen
• Cold storage, freezer
• Confectionery manufacturing
• Palm oil processing
• Wet packaging plants
• Dairy products manufacturing

Cautions:

Before using any LATICRETE product, check the website for technical bulletins or updated information about the product and its application.

• Consult MSDS for more safety information.

Application Time:

• +/- 15 minutes for pedestrian traffic
• +/- 25 minutes for heavy traffic
• +/- 35 minutes for fully chemical curing

Drying/Curing Time:

• Pedestrian Traffic: 8 hours
• Heavy Traffic: 24 hours
• Fully Chemical Curing: 5 days

Strength:

• Compressive Strength: 50 N/mm2
• Flexural Strength: 15 N/mm2

Thermal Service:

• Taber Abrasion Resistant ASTM D4060: 1.0 g/1 kg/1000 cycles
• Coefficient of Thermal Expansion BS EN 1770: 1998

Mortar UT HF is consists 4-components, trowel-applied polyurethane mortar screed applied in thickness from 6-9mm heavy duty floor finish. Its provide a seamless, high mechanical properties, high chemicals, anti-slip surface, freeze and thaw resistance with texture matt finish.

FEATURES/BENEFITS

• Suitable for hygienic hot water steaming clean.
• Hard wearing; good abrasion resistance.
• High chemical resistance against alkaline, acids, bases and organic solvents.
• High mechanical and impact resistance.
• Temperature service with wide range between -35°C to 140°C*
• Resist fungi, mildew and bacteria growth.
• Solvent free, odorless.
• Anti-slip finish for wet and oily floor.

USES

• GMP, HACCP, compliance hygienic Industrial floors
• Abbatoir
• Dry/wet food processing, beverage, seafood, meat production
• Central kitchen
• Cold storage, freezer.
• Confectionery manufacturing
• Palm oil processing
• Wet packaging plants
• Dairy products manufacturing

MANUFACTURER/ DISTRIBUTED BY

LATICRETE South East Asia Pte Ltd No. 38 Sungei Kadut Street 2 (Level 2, A3)
Singapore 729245
Telephone: +65 6515 3028 Fax: +65 6515 3037
Internet : se.laticrete.com

STANDARDS/CERTIFICATIONS

• ASTM C942
• ASTM D638-14
• ASTM C348 : 2002
• BS EN 1770 : 1998

Suitable Substrates

• Over Concrete
• Polymer modified screed

Packaging

• Part A: 3 kg Part B: 3 kg
• Part C: 14 kg
• Part D: 12 kg
• A complete set packaging: 32.0 kg

Coverage
One set of Mortar UT HF yield a coverage of approximate 2.55 m² at 6mm thick per coat, 1.70 m² at 9mm thick per coat

Colours
Red, Green, Cream, Light Grey, Dark Grey, Brown Beige.

Shelf Life
Twelve (12) months if unopened components stored off the ground in a dry area, at temperatures 10 – 32 °C.

Limitations

This is a product of Industrial use and not domestic. It should only be applied by personnel with an adequate sense in the appropriate methods of application and handling of the product. Not applicable on asphalt floor, tiles, clay brick, copper, aluminum, wood floors or urethane-derived compositions such as elastomeric membranes, composite polyester fibers, PVC membranes. Do not apply to porous surfaces where the water vapor stream may be present during application. Do not apply to surface with water or completely moist. Do not apply over concrete and moisture Is greater than 10%.

Cautions
Before using any LATICRETE product:

• Check se.laticrete.com for any technical bulletins or updated information about the product and its application
• Consult MSDS for more safety information

TECHNICAL DATA

Performance Properties

Pot Life(Working Time)
30 ºC| +/- 15 minutes
15 ºC| +/- 25 minutes
8 ºC| +/- 35 minutes
Curing time (35˚C)
Pedestrian Traffic| 8 hours
---|---
Heavy Traffic| 24 hours
Fully Chemical Curing| 5 days
Compressive Strength| 50 N/mm2
Flexural Strength| 15 N/mm2
Thermal Service| At 6-9mm: -35˚C to 140˚C
Taber Abrasion Resistant ASTM D4060| 1.0 g/1 kg/1000 cycles
Coefficient of Thermal Expansion BS EN 1770: 1998| 2.5 x 10-5 ºC
Dynamic Elastic Modulus| 20,000 N/mm²
Impact Resistant BS 8204-1, BS 1881-Part 201| <0.5 mm indentation
Mix Ratio| A (3): B (3) : C (14):

D(12) by weight (32 kg packing)

Specifications subject to change without notification. Results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site conditions.

INSTALLATION SYSTEM

Surface Preparation

Concrete substrate or polymer modified screed should have a minimum of compressive strength 25.0 N/mm2 and adhesive pull-off strength of minimum 1.5.N/mm2. The substrates should be clean and free from laitance, oil, dust, loose constituents, paint residues, chemical, algae and other contamination should be removed. The substrates should be dry and free from ground water pressure. The substrates should be dry and free from ground water pressure. If the substrate moisture content exceeded 5%, apply an effective moisture vapor barrier. The substrate must be prepared by captive shot blasting, remove all surface laitance and loose particles etc. Cracks and hollows should be properly remedied. Prepare grooves 8mm wide X 8mm deep at all edges, bay joints columns, doorways and drains for anchoring purpose.

Mixing

Agitate Part A & Part B before pouring into the barrel; pour all the Part B and Part A into the clean mixing barrel and mix for 10 seconds by using a suitable electrical helical blades mixer (with 750watt power drill), then only add in the Part C to mix at least one minute until fully achieved a homogeneous mixture. Add Part D into the mixture, and mix for another 2 minutes until homogeneous the mix

Application

• Pour the mixture on the prepared surface and spread evenly using a clearance control notched pined rack to the thickness of 6mm or 9mm.
• Apply spike roller to release entrapped air subsequently after smoothed with a steel trowel.
• Apply Mortar UT HF Topping must be within the pot life (working time ± 15 minutes.)

AVAILABILITY AND COST

Availability
LATICRETE and LATAPOXY materials are available worldwide. For distributor information, call:
Telephone : (65) 6515-3028
Fax : (65) 6515-3037
For on-line distributor information, visit LATICRETE at se.laticrete.com

Cost
Contact a LATICRETE Distributor in your area

WARRANTY

LATICRETE South East Asia Pte Ltd warrants that Mortar UT HF is free from manufacturing defects and will not to break down, deteriorate or disintegrate under normal usage for a period of one (1) year from date of purchase subject to terms and conditions stated

MAINTENANCE

The long term performance, appearance, and life expectancy of wear surface products are critically dependent upon a good routine maintenance regime designed specifically for the installed wear surface

TECHNICAL SERVICES

Technical Assistance

Information is available by calling:
LATICRETE South East Asia Pte Ltd (Level 2, A3)
No. 38 Sungei Kadut, Street 2, Singapore 729245
Telephone : (65) 6515-3028
Fax : (65) 6515-3037
Email : enquiry@laticrete.com.sg

Technical and safety literature
To acquire technical and safety literature, please visit our website at se.laticrete.com

LATICRETE South East Asia Pte Ltd | 38 Sungei Kadut Street 2, Level 2 A3, Singapore 729245 65-6515 3028 65-6515 3037 enquiry@laticrete.com.sg
Copyright 2021 Data Sheets are subject to change without notice. For latest revision, visit se.laticrete.com

References

• Southeast Asia - LATICRETE
• Southeast Asia - LATICRETE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>