BLACK-OPS SERIES BSP2108 Bronco Transfer Case Skid Plate Owner’s Manual
- June 13, 2024
- BLACK-OPS SERIES
Table of Contents
BLACK-OPS SERIES BSP2108 Bronco Transfer Case Skid Plate
VERIFY YOU HAVE ALL THE COMPONENTS BEFORE STARTING THE INSTALLATION. REFER TO THE ENGINEERING DRAWINGS AT THE END OF THIS DOCUMENT FOR A COMPLETE PARTS LIST
Front of Bronco
Have a helper hold the skid plate in place while you install the bolts as shown. Or you can use a floor jack to hold the skid plate in position.
Install the Cross Member Bracket using the M10 Hex Bolts and Washers in the position shown on the chassis Cross Member directly in front of your transfer case.
Leave these bolts loose while you finish the installation.
TRANSFER CASE SKID PLATE SHIPPING SHEET
Packaged by
Have a helper hold the skid
plate in place while you install the bolts as shown.
Or you can use a floor jack
to hold the skid plate in position. Be sure to tighten all bolts evenly and
securely.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>