CARRO P-M4006011A1 Bristol 60 Watt Integrated LED Matte Black Pendant Instruction Manual
- June 3, 2024
- CARRO
Table of Contents
CARRO P-M4006011A1 Bristol 60 Watt Integrated LED Matte Black Pendant
Description
INSTALLATION INSTRUCTION
- Electrical appliances must only be connected by competent persons.
- Before commencing installation work disconnect the mains cable from the power supply-removing the fuse or turning switch to “OFF”!
- Do not attach lamps to surface which are damp,freshly painted, otherwise eletrically conductive.
- Use the subjection system according to the weight of the lamp.
- Be sure to always use the correct type of bulb. (See information on the label)
- Cleaning is limited to the outer surfaces, shades or protective glass, reflectors and covers.
- Do not touch the bulb with bare hands. Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.
- If the light is with crystal or glass,please follow below steps.
- Check the packed bags with numbers then open them.
- Hang the crystals to the right places according to theillustration.
NOTES:
- The symbol ” “indicates that the lamp has an earth terminal.(The earth wire yellow and green )must be connected to the terminal indicated by the symbol.
- “Protection class II=This lamp is doubly insulated and must not be connected to and earth wire.
- The symbol” “indicates that the lamp head must be at least ‘0.5m’ from the lighted surface.
- The symbol” “indicates that luminaire is suitable for use on normally flammable surface.
- The symbol” “indicates that luminaire is only suitable for use indoors.
- The below is how fitting wire connect to household circuit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>