CARRO WGS-523FL LED Indoor Gold Smart Ceiling Fan User Manual

WGS-523FL LED Indoor
Gold Smart Ceiling Fan
User Manual

WGS-523FL LED Indoor Gold Smart Ceiling Fan

Please read and follow all the Instructions carefully before using this product The product Image shown here Is Indicative only.
The actual product you receive may differ.

READ INSTRUCTIONS CAREFULLY FOR SAFE INSTALLATION AND FAN OPERATION. IF UNCERTAIN, CONSULT A QUALIFIED ELECTRICIAN.

THANK YOU FOR YOUR PURCHASE

Thank you for purchasing a Carro Home product. To ensure correct function and safety, please read and follow all the instructions before using the product.

SAFETY GUIDELINES:

1. To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin the fan installation, servicing the fan or installing any accessories.
2. Read all instructions and safety guidelines carefully before installing your fan and follow all the instructions.
3. Make sure all electrical connections comply with the local codes or ordinances and the National Electrical Code. If you are unfamiliar with electric wiring, please consult a qualified and licensed electrician.
4. Make sure you have a location selected for your fan that allows clear space for the blades to rotate. and at least seven (7) feet of clearance between the floor and the fan blade tips. The fan should be mounted at least thirty (30) inches from walls and/or other upright structures.
5. WARNING : The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least 100 pounds. To reduce the risk of fire, electric shock, or personal injury, mount to the outlet box marked acceptable for fan support and use mounting screws provided with the outlet box. The box must be supported directly by the building structure.
6. WARNING : To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked ‘acceptable for fan support and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.
7. Switches must be ETL. general use switches. Refer to the instruction packaged with the switches for proper assembly.
8. After installation is complete. check that all connections are firmly secured.
9. After making electrical connections, spliced conductors should be turned upward and pushed up Carefully into the outlet box. The wires should be placed apart with the grounded conductor and the equipment-grounding conductor on the opposite side of the outlet box.
10. WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device, or rheostat.
11. Do not separate the reverse switch until the fan has come to a complete stop.
12. Do not insert anything into the fan blades while they are rotating.
13. WARNING : To reduce the risk of personal injury, do not bend the blade brackets (also referred to as “flanges”) during assembly or after installation. Do not insert objects in the path of the blades.
14. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
15. Do not use water or detergent when cleaning the fan or fan blades. Dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
    NOTE : The important safety precautions and instructions in the manual are not meant to cover all possible conditions and situations that may occur. It is understood that common sense and caution are necessary factors during the installation and operation of the fan.
    NOTE : This product is not intended for use by persons (including children) with the reduced physical. sensory or mental capabilities that are different or impaired, or lack of experience and/or knowledge. unless such persons are supervised and/or trained to operate the appliance by a person responsible for their safety.
    NOTE : Children should be supervised to ensure that they do not use appliances as a toy.
    NOTE : You must install a switch or circuit breaker that disconnects all power poles of at least 3 mm between each pole.

Unpacking your fan

Carefully open the packaging. Remove items from Styrofoam insets. Remove motor housing and place on carpet or styrofoam to avoid damage to finish not discard fan canon or styrofoam inserts should this fan need to be returned for repairs. Check against parts inventory that all parts have been included.

Parts inventory.

a. Hanging bracket
b. Canopy c. Canopy cover
d. Download assembly
e. Coupler cover
f. Motor assembly
g. Light kit| h. LED module
I. Glass shade
j. Blade bracket
k. Blade
I. Hardware packs
m. Balance kit
---|---

PREPARING FOR INSTALLATION

FEATURES
For normal ceilings
DOWNLOAD INSTALLATION

Unpack and inspect fan carefully to be certain II contents are included Tum off power at the fuse box to avoid possible electrical shock.![CARRO WGS-523FL LED Indoor Gold Smart Ceiling Fan

• fig2](https://manuals.plus/wp-content/uploads/2022/09/CARRO-WGS-523FL-LED- Indoor-Gold-Smart-Ceiling-Fan-fig2.png) Use metal outlet box suite* for support (must support S lbs). Before attaching the fan to the outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling membe (a loose box will cause the fan to wobble).

MOUNTING BRACKET INSTALLATION

Loosen but don’t remove the screws at the bottom of the canopy: remove the mounting bracket from the canopy.

MOUNTING BRACKET INSTALLATION

Install mounting bracket to outlet box n ceiling using the suews and washers provided with the outlet box.

MOUNTING OPTIONS
Choose a MOUNTING OPTION
NORMAL DOWNROD OPTION
If installing downrod supplied with fan, proceed to step 8.
EXTENDED DOWNROD OPTION
If instating sob longerdonrod than supplied with fandivoceed tostepti

EXTENDED DOWNROD OPTION

loosen the downrod ball (1) from download (2) by removing the screw (3). Slide download ball (1) off of downrod and remove pin (4).

Re-install the pin into the download, and slide the download ball up to the top of the download. Re-install the screw t secure the ball to download.
Note: Some extended downloads have a pre-drilled set-grew hole. If a pre- drilled hole is present in the extended ed download, tighten the set screw into the pre-drilled hole in the extended sownrod. If no pre-drilled hole exists in the extended download tighten the screw against the doomed to secure the downrod ball.

DOWNLOAD PREPARATION

Remove damp pin (1) and (10% pin (2) from download (3).

NORMAL DOWNROD OPTION

Place doomed assembly into the canopy (1), canopy WAY ring (2), and coupling cover (3). Feed motor wires through the downrod assembly.

loosen set screws in download coupling (1). hued download into dor/Iliad coupling. Make sure to align the hole in the download with the hole in the coupling. Install yoke cross pin (2) through yoke and demigod. Insertdamp pin (3) into the cross pin until it snaps into place. lighten set screws (4) in coupling. Slide coupling cover (S) oyer coupling.

Installing the Fan Blades

Step 1. Attach the blade to the blade bracket using the screws and washers as shown in Fig a. Repeat this step for the other two remaining blade brackets. Tighten each screw, and make sure the blade is straight.
Step 2. Attach the blade bracket with a blade to the motor using the two screws provided. See Fig b.

Installing the light kit

1. Loosen 4 screws from the connecting plate before installing the light kit. (Fig.13)

2. Remove 3 screws from the light kit and connect the single pin wire from the light kit to the motor(Fig.14)
   – blue to black
   – white to white

3. Locate slots on glass shade and align with dimples on glass fitter plate. Slide onto the glass fitter plate and turn it in a clockwise direction until it locks into place. (Fig.15)

Make wire connections using wire nuts: Fan wire connection:

1. Connect blue wire from fan to blue wire from ceiling outlet box.
2. Connect the black wire from the fan to the black wire from the ceiling outlet box. |
3. Connect the white wire from the fan to the white wire (neutral) from the ceiling outlet box.
4.  Connect green ground wires from downrod and bracket to ground wire (green or bare copper) from ceiling outlet box.

Wall switch connection:

1. Take out the white wire and wire nut from the screw bag. Stick this white wire to the switch by the provided screw. Then connect tightly this white wire to the neutral wire from the wall by a wire nut.
   (If the length of the neutral wire from the wall is long enough, connect it to the switch directly. )

2. Connect tightly the remaining wires from the wall to the switch by the provided screws as per the above wiring diagram. Note: If the wiring in your wall outlet box does not resemble any of these configurations, consult a qualified electrician.

WARNING : Be sure no bare wire or wire sviatavatevaltadaftAtsmalcing connection.

MOUNTING

Carefully lift fan assembly onto mounting bracket. Rotate the fan until the notch on the downrod ball (1) engages the ridge on the mounting bracket (2). This will allow for hands-free wiring.

With bracket holding fan assembly, make electrical connections using the following step for wiring instructions.

WALL CONTROL INSTRUCTIONS

WALL CONTROL INSTALLATION: Carefully tuck the wire connections from the wall control inside the wall outlet box. Secure the wall control with two wall control screws provided. Attach the wall control cover over the wall control and secure it with two wall control cover screws provided. Then snap In the wallplate. USING YOUR CEILING FAN:

WALL  CONTROL Turn on the power and check the operation of the fan
1 – Lamp Switch
2 – Speed Control
3 – Fan Shutdown
Reverse function
Slide the forward reverse switch on the switch box to get desired airflow direction.

SECURE TO CEILING

Raise the canopy up and align the keyholes on the bottom of the canopy with the 2 screws on the bottom of the mounting bracket. Rotate the canopy until both screws from the mounting bracket drop into the slot recesses. Tighten screws securely.

The inside canopy cover ring (1) has two keyhole slots that allow it to be mounted onto the screw heads on the two protruding screws from the mounting bracket. Slide the canopy cover ring up the download, and allow the two protruding screw heads from the mounting bracket to go into the keyhole slots on the canopy cover ring. Once engaged, twist the canopy cover ring to lock it onto the screw heads. Note: Some adjustment of the screws from the mounting bracket may be necessary to allow the canopy cover ring to attach to the screw heads in the appropriate manner

1. Loosening of the grown heads may be necessary to allow the canopy cover ring to fit onto the screws from the mounting bracket.
2. If the canopy is still loose after installing the canopy cover ring, the canopy cover ring may need to be removed and the mounting bracket screws tightened slightly to allow a more snug fit of the canopy when the canopy cover ring is installed.

OPERATION AND MAINTENANCE

Operation
Turn on the power and did generation of tan. Speed settings for warm or cool weak( depend on cm factor such as room size, ceiling height, number of fans, and so on.
The slide snub controls direction, fa: wad or reverse.
Warm macho/dorm mince) -(Forward) Fan hens counttickdwise direction. A downward air Cow creates a cooling effect as shown by luntatkei A. This allows you to set your air conditioner on a higher temperature setting without affecting your comfort (oolswatherfup position *noel Fan twos dockside direction. An upward airflow mows warm air Of the (ern; area as shown in dynodes This allows you to set your heating wit on a lower setting without affecting your contort
1101E: Turn off and wait For the fan to stop before changing the setting of the kewardneeme slide switch.

Maintenance

1. Because of the tarn natural movement, some connections may become loose. Check the support connections and brackets. and blade attachments twice a year. Make sure they are secure.
2. Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning. This could damage the motor, or the wood, or possibly cause electrical shod.
3. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer coating to minimize discoloration or tarnishing.
4. There is no need to oil your fan. The motor has permanently lubricated bearings.

APP Control Connection:

1. First, download the free Carro Home app from the App Store or Google Play or scan the QR Code below.
2. Open the Carro Home app to create your account. The account with “Carro Home” can be registered through E-mail or Mobile phone.
3. Connect the device to the Carro Home app (Four ways connection):

https://a.smart321.com/carrohomesmartfan

1. Bluetooth connect (WIFI & Bluetooth on)
   a. Press the “+” button into the device list, then a window will pop up to show you some devices that can be connected.
   b. Click ‘Go to add” (If you click “Do not add’ in mistake. please see “Do not add’ steps).
   c. Choose the device.
   d. Connect to your home WIFI, then back to the app and wait for connecting.
   “Do not add” steps :
   a. Select “Electrical”(smart switch) or “Air Circulation-(smart ceiling fan) on the sidebar menu then select “Ceiling Fan Switch° or “Ceiling Fan” and tap next.
   b. Connect to your home WIFI and tap “Next” to wait for connecting.

2. Auto Scan (WIFI & Bluetooth on)
   a. Press the “-” button into the device list.
   b. Tap “Auto Scan” on the top
   c. Wait for the device comes out and tap “Next.
   d. Press the “+” button to add a device.
   e. Connect to your home WIFI. f. Wait for connecting.

3. WIFI connect-EZ Mode (WIFI on & Bluetooth off)
   a. Press the “+’ button to select “Electrical-(smart switch) or ‘Air Circulation”(smart ceiling fan) on the sidebar menu then select °Ceiling Fan Switch” or ‘Ceiling Fan’ and tap next.
   b. Connect to your home WIFI (Only for 2.4Ghz).
   c. EZ Mode is set as default, just tap the “Next button to wait for the connection to complete.

4. WIFI connect-AP Mode (WIFI on & Bluetooth off)
   a. Smart ceiling fan: Press and hold the WIFI button on the remote for 5 seconds till hearing a beep into AP Mode. Smart switch: Press and hold the “OFF’ button for 10 seconds till the indicator light blinks slowly into AP Mode.
   b. Press the “+” button to select “Electrical(smart switch) or ‘Air Circulation”(smart ceiling fan) on the sidebar menu then select “Ceiling Fan Switch” or ‘Ceiling Fan’ and tap next.
   c. Connect to your home WIFI (Only for 2.4Ghz).
   d. Choose AP Mode.
   e. Press the’ Next” button to go to connect the fan’s win signal.
   f. Choose the fan’s WIFI signal tarroHome-XXXX” then back to the app.
   g. Wait for connecting.

5. Connect the device to Alexa:
   a. Make sure you have connected the device to the app and working normally.
   b. Open the Alexa app, and go to the skill to search “Cerro Home” skill.
   c. Link the skill, log in with your Carro Home app account and password, then authorize and connect with the Carro Home app.
   d. Then Alexa will find out the device automatically.

6. Connect the device to the Google Home
   a. Make sure you have connected the device to the app and working normally.
   b. Open the Google Home app, Set up a device, and choose “Works with Google”.
   c. Search “Cerro Home”, log in with your Carro Home app account and password, then authorize and connect with the Cerro Home app.
   d. Then the Coop?, Assistant will find out the device automatically.

7. Connect the device to the Sid shortcuts
   a. Make sure you have connected the device to the app and working functionally.
   b. Tap ‘Smart’ on the main menu.
   c. Tap the “+- button.
   d. Tap “launch Tap To Run”.
   e. Tap ‘Run the device”.
   f. Choose the device you want to control by Siri.
   g. Select the function you want to control by Sid.
   h. Then save it.
   I. Add to Sid, choose the scene you just made. Add to Siri.
   j. Enter the sentence you want to say to make the device works. Add to Siri.

Care and cleaning:

1. Check the support connections, brackets, and airfoil attachments twice a year. Make sure they are secure. Because of the fan’s natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling.
2. Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
3. (Optional)Apply a light coat of furniture polish to the wood blades.
4. Optional) Cover small scratches with a light application of shoe polish.

Do not:

1. Use water when cleaning. Water could damage the motor, or the wood, or possibly cause an electrical shock.
2. Apply oil to your fan or motor. The motor has permanently lubricated sealed ball bearings.
   Note : Power off the fan before product maintenance or cleaning the fan.

FCC Statement:

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Troubleshooting:

Your fan may occasionally jerk forward and backward upon start up. This Is normal and does not affect fan operation.
Try these troubleshooting steps before contacting Customer Service.

breakers.
2. Check wire connections as performed in step #18 of installation.
CAUTION: Make sure the main power is turned off.
3. Make sure the forward/reverse switch is firmly in the up or down position. The fan will not operate when the switch is in the middle.
4. If the fan still will not Merl, contact a qualified electrician. Do not attempt to troubleshoot internal electrical connections yourself.
If the fan sounds noisy| 1. Check to make sure the screws in the motor housing are snug (not over-tightened).
2. Check to make sure the screws which attach the fan blade holder to the motor are tight.
3. Some fan motors are sensitive to signals from Solid State variable speed controls. DO NOT USE a Solid State variable speed control.
4. Allow’break-in* period of 24 hours. Most noises associated with a new fan will disappear after this period.
If fan wobbles| All blades are weighed and grouped by weight. Natural woods vary in density which could cause the fan to wobble oven though all blades are weight-matched. The following procedures should eliminate most of the wobble. Check for wobble and alter each step.
1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are tightened securely to the motor.
3. Make sure that the canopy and mounting bracket are tightened securely to the ceiling Joist. 4.11 blade wobble Is still noticeable. interchanging two adjacent (side by side) blades can redistribute the weight and possibly result in smoother operation.
II light does not work| 1. Check for faulty light bulbs.
2. Check to see that the wire connections in the switch housing are connected.
3. If the light kit will still not operate. contact a qualified electrician for assistance

Cerro USA Inc
1431 S. BakerAve.
Ontario CA 91781 Tel:888-253-2374
www.smafan.com cs@carrohome.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>