Tera P600 Android 11 Bar Code Scanner PDA with Pistol Grip User Guide

P600 Android 11 Bar Code Scanner PDA with Pistol Grip

“`html

Specifications:

• Operating System: Android 11
• Processor: Octa-core chipset
• Connectivity: Wi-Fi, 4G LTE
• Wireless Technology: Bluetooth including Bluetooth Low Energy,
  NFC

Product Usage Instructions:

About the Terminal:

The Tera P600 is a full-touch handheld terminal designed for
speed workflows in businesses such as in-store merchandising, order
picking, and delivery. It is powered by Android 11 and features an
octa-core chipset, fast Wi-Fi, and 4G LTE connectivity for a
seamless user experience.

Terminal Features:

• Speaker (Handset Receiver)
• Light Sensor and Proximity Sensor
• Front Camera
• Rear Camera Scan Engine NFC Antenna Loudspeaker
• Expansion Ports
• Battery Latch
• SIM and TF Card Slot
• Volume Up/Down and Scan Buttons

Buttons and Description:

To restart the terminal:

1. Press and hold the Power button until the options menu
   appears.

2. Select Restart.

To restart the terminal if the touch panel display is
unresponsive:
Press and hold the Power button for approximately 8 seconds until
it restarts.

Install Micro SD and SIM cards:

Always power off the terminal before attempting to install or
remove a card.

About the Battery:

1. If storing the terminal for a few days, ensure it has a fully
   charged battery or connect it to a power source. For longer storage
   periods, remove and charge the battery. Store both in a cool
   location.

2. Expected Battery Life: Up to 80% capacity after 300 charge
   cycles.

3. As lithium-ion batteries age, their capacity diminishes.
   Recharge periodically for peak performance.

Caution: Improper battery replacement or
incompatible usage may pose risks. Dispose of lithium-ion batteries
according to local regulations. Do not open, crush, heat, or
incinerate.

FAQ:

Q: How do I know if my battery needs replacement?

A: If your battery no longer holds a charge or if it swells, it
may be time for a replacement. Contact customer support for
assistance.

Q: Can I use any micro SD card with the terminal?

A: It is recommended to use micro SD cards from reputable brands
to ensure compatibility and performance.

“`

Mobile Data Terminal
P600 Quick Start Guide
Need Support Issue with missing or damaged items?
info@tera-digital.com https://www.tera-digital.com +1(626)438-1404

About the Terminal

Introducing the Tera P600: A sleek , full-touch handheld terminal designed to help businesses provide speed workflows such as instore merchandising, and order picking for in-store pickup or deliver y. Powered by the Android TM 11 operating system and equipped with a high-performance octa-core chipset, fast Wi-Fi, and 4G LTE connectivity, the P600 offers a seamless user experience.
Moreover, the P600 offers the added benefit of a warm swap battery feature and delivers real-time connectivity and advanced data capture with Bluetooth wireless radio technology that includes Bluetooth Low Energy, and integrated Near Field Communication (NFC) technology. This broad spectrum of capabilities makes it an ideal solution for applications spanning logistics, warehousing, retail, and beyond.
Terminal Features

The front, back and side view of the P600 are shown as follows:

Speaker(Handset Receiver)
LightSensor and Proximity Sensor
Front Camera
Indicator

Rear Camera Scan Engine NFC Antenna Loudspeaker
Expansion Po r t s

Battery Latch

SIM and TF Card Slot

Battery Compartment

Volume Up/Down Left Scan Button
Buttons and Description

Power Button Custom Button
Right Scan Button

Restart the terminal
You may need to restart the terminal to correct conditions where an application stops responding to the system or the terminal seems to be locked up. 1. Press and hold the Power button until the options menu appears. 2. Select Restart. To restart the terminal if the touch panel display is unresponsive: Press and hold the Power button for approximately 8 seconds until it restarts.
Install Micro SD and SIM cards
The positions of the card slots are indicated as follows:

T
SIM2 SIM1

Note: Always power off the terminal before attempting to install or remove a card.
About the battery
The terminal uses a rechargeable Li-ion battery as its main power source. Several factors determine the life of the batter y, such as screen brightness, screen timeout, network option, and extreme temperature.
1. If you are storing the terminal for a few days (such as cover the weekend), install a fully charged battery or connect the terminal to a power source. If you are storing the terminal for a longer period of time, remove and charge the batter y. When the battery is done charging, store both the battery and the terminal in a cool location. If you store the battery for several months, recharge the battery periodically to keep it at peak performance.
2. Expected Battery Life: Under typical conditions, the battery

can retain up to 80% of its original capacity after approximately 300 complete charge cycles. A charge cycle involves the process of both charging and discharging the battery as needed for device usage.
3. As lithium-ion batteries chemically age, the amount of charge they can hold diminishes, resulting in shorter amounts of time before a device needs to be recharged.
4. For maximum battery life, charge the battery at 20 °C (68°F) to 25°C (77°F) and store at 20°C (68°F) with a 30%-50% charge.
Caution:Improper battery replacement or incompatible device usage may result in risk of burns,fire, explosion, or other hazard. Dispose of lithium-ion batteries according to local regulations. Risk of fire and burns if improperly handled. Do not open, crush, heat or incinerate..
Install the Battery
1. Insert the charged battery pack into the battery compartment. The bottom of the battery must go in first. 2. Press the battery down into the battery compartment until the battery release latches snap into place. 3. Slide the battery latch to the left.
Remove the Battery
1. Press and hold the Power button until the options menu appears. 2. Tap Power off. 3. Slide the batter y latch to the right. The batter y ejects slightly. 4. Remove the battery from the battery compartment.
Charge the Terminal
This device comes with a USB Type-C port, and it is recommended to charge the device using the provided original USB cable and power adapter. Begin by connecting the USB cable to the power adapter, and then connect it to the terminal. The terminal will start charging automatically, and the LED Indicator will display the current charge status. If the LED indicator is solid red, it means that the terminal is charging; if the LED indicator is solid green, it indicates that the terminal is fully charged. You also have the option of using the original USB Type-A to USB Type-C cable to charge the terminal from a host device, such as a laptop or desktop computer. However, please ensure that the connected host device can supply a minimum power output of 5V and 0.5A to the terminal.

Using the terminal while charging the battery increases the time required to reach a full charge. If the mobile terminal is drawing more current than supplied by the charging source, charging will not take place. (Note: Avoid using third-party cables or adapters to charge the tAebrmouintaNl feoarroFpietilmd aClopmermfournmicaantcieonan(dNFsaCf)ety.)
NFC technology provides the ability for short-range, wireless data transfer between the P600 and NFC tags or other NFC enabled devices placed in close proximity to the back of the terminal. The P600 supports the following mode of operation: NFC tag reader/writer mode: The terminal reads and/or writes Adibgoituatl tinhfeoBrmCSatciaonn Afrpopmliocar ttiooann. NFC tag.
BCScan is a demonstration application designed to test scan performance and manage the scan engine. Please be aware that not all barcode symbologies are activated by default in the BCScan app. If a barcode fails to scan, it is possible that the correct symbology is not enabled. To modify the scan profile or assess the scan engine’s performance, you must launch the BCScan application. Below is a screenshot showcasing the application’s primar y interface.
In the Demo app, tap in the upper left corner of the screen to obtain further information regarding each scan result.

If you have completed the setup process for a device and would like to install the same configuration on another device, please follow these steps:
· Tap , and choose the “Export Config” option · Locate the exported file and transfer it to the desired device. · Launch the BCScan app on the target device. · Navigate to the scanner settings within the app. · Select the “Import Config” option to load the previously exported file.

The scan results will appear in the upper box and the related information regarding the scanned barcode including symbology, decoding time and message length will show up in the fields underneath the box. If you need to check scanning accuracy, please tap
In this screen, you will find two text boxes where will show the previous scan and the current scan so as for the user to identify if the scans are the same. To set up the scan engine, please tap to access scanner settings

By default, the integrated scan engine is enabled for scanning. It supports omni-directional barcode scanning, and an aiming beam is provided to help assist with targeting barcodes.
If you require data format modifications such as adding a prefix or suffix, or removing characters, please tap on the Label Formatting option to access additional settings. If you need to enable or disable symbologies, DPM Mode, or OCR Mode, please tap on the Symbology Settings option to access further settings.

Specifications

Dimensions Weight Display Backlight Buttons
Battery
SIM Card Tray Audio
Camera

Mechanical
163 x 77.2 x 13 mm / 6.4 x 3.0 x 0.51 in.
259 g / 9.14 oz. (with battery)
6-inch 2160 x 1080 FHD IPS
450 Nits, LED
2 SCAN buttons + 1 Power button+1 User-defined button + Volume up/down buttons 5000 mAh removable li-ion battery Standby: over 300 hours Continuous use: over 12 hours (depending on user environment) Charge time: 2.5 hours (with the original adaptor and USB cable, QC 3.0)
2 slots for Nano SIM card, 1 slot for TF card
2 microphones, 1 speaker
Rear 16MP autofocus camera; flash LED

System Architecture

CPU Operating System
RAM Interface
ROM Storage Expansion

Qualcomm Snapdragon 662, Octa-core, 2.0GHz Android 11 4GB USB Type-C 64GB Micro SD card

Operating Temperature
Storage Temperature
Humidity
Sealing
Drop Test Electrostatic Discharge (ESD)

Environmental
-20 to 50/-4°F to 122°F
-40 to 70/-40°F to 158°F
5%RH – 95%RH (Non-condensing)
IP67, IEC sealing standard Multiple drops to concrete at room temperature from 1.5m / 4.9 ft. +/-15 kV air discharge, +/-8 kV direct discharge

WAN WLAN Bluetooth
Scan Engine NFC

Connectivity 2G/3G/4G IEEE 802.11 a/b/g/n/ac/ax ready/d/e/h/i/j/ k/r/v/w2.4G/5G Dual band WIFI Bluetooth 5.1, Bluetooth Low Energy (BLE)
Data Collection Honeywell Scan Engine ISO 14443 Type A and B

References

• Tera | Barcode Scanner & Scanning Solution Provider

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>