Tera Pet H01 Microchip Reader Scanner User Guide
- June 2, 2024
- Tera Pet
Table of Contents
Tera Pet H01 Microchip Reader Scanner
Getting to know the reader
This item is a wireless hand-held microchip reader that can read ISO FDX-B
coded radio frequency identification tags. It has very simple controls and a
high-brightness OLEO display which allows you to read the numbers even in
bright sunlight.
With built-in memory, it can store up to 30 ID tag codes, which can be
downloaded to a computer via a USB cable connection
( Note : There must be a text field for the reader to input characters in
when downloading stored codes). Optimum performance delivers great animal
traceability management.
Specifications
- Power Built-in Rechargeable Battery (Charge it for 2 hours before the first use)
- Battery Life 4 hours (Work Continuously)
- Operating Frequency 134.2KHz
- Tag Compatibility ISO FDX-B(ISO11784/85)
- Interface USB 2.0
- Display OLEO
- Memory 30 ID Numbers
- Indicator Audio Beeps and OLEO
- Read Distance 10-15cm (Glass Tag, vary on Chip Sizes & Types) 20-22cm (Ear Tag, vary on Chip Sizes and Types)
- Language English
- Accessory USB Cable *1
- Operating Temperature -10° C to 55°C
- Storage Temperature -30° C to 65°C
- Relative Humidity 5% to 90% non-condensing
- Package Dimensions 21.3cm14.9cm2.9cm
- Weight 90g
Instructions
-
Hold down the button for 3s to power up the reader and the following sign appears on the screen.
-
Hold the reader over the chip location. If the reader fails to detect any tags, it displays No Tag on the screen.
( Note : The reader will stop reading if no tags are detected within 20) -
If the reader detects a tag, it displays the number on the screen.
-
Press the button once to continue scanning tags.
-
To check scanned data, press the button twice while the screen shows the read sign.
-
If there are no further inputs, the scanned data will remain displayed for 5s and the reader will turn off in 60s.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>