deli E2132 Laminator User Manual
- June 9, 2024
- DELI
Table of Contents
deli E2132 Laminator
Thank you for purchasing a Deli laminator. Please use Deli branded laminating pouches with the Deli laminator which will preserve your documents and photos, making them waterproof, tear-proof, cleanable and delicate. Be mindful that removal of lamination could be very difñicult and risky. To avoid personal injury or property damage, please read this manual carefully and use the product accordingly.
Attention
- Warning! Keep out of the reach of children.
- Warning! Do not touch the pouch inlet with your hand during operation.
- Warning! Do not touch the surface of the machine with your hand during operation.
- Warning! Please do not allow tie, necklace, sleeves, etc. to get pulling into the pouch inlet.
- Warning! Please do not allow your hair to get pulling into the pouch inlet.
- Warning! Please be cautious of hot surface during operation.
- Warning! Do not disassemble or repair the machine by yourself in any way, to avoid electric shock or accidental injury.ln case that an item gets pulled into the laminator and the machine fails, please unplug the power cord and contact your dealer or after-sales service center and follow their instructions.
- Warning! Do not splash water onto the machine, avoid a fire or electric shock.
- Warning! Do not operate the machine with wet hands, to avoid electric shock or accidental i
- In case of power outage during operation, please pull out the item being laminated evenly within a short time, and unplug the machine, to avoid fire or electric shock.
- Warning! Do not damage or process the power cord or place objects on the power cord, to avoid a fire or electric shock.
- In case of smoke, odor or other abnormal conditions, please turn off the power switch immediately and stop using, to avoid a fire or electric shock.
- Always unplug the power plug before moving the laminator.
- Do not use the laminator if the machine or power cord is damaged, to avoid a fire or electric shock.
- When operating the power switch, please make sure that the power plug is properly inserted into the power socket, to avoid damage to the machine. (There il be a crisp crackling sound when the switch is in good contact).
Safety Instructions
Placement of the laminator.
- Do not put the machine in damp place or near the air conditioning vent, to avoid dangerous accidents such as electricity leakage and insulation failure.
- Please ensure the machine is on a flat and level surface,and leave enough space on the side of the pouch outlet.
- Please do not place anything on top of the laminator.
- Be sure to use AC220V power supply.
Laminating pouch:
- It is recommended to use the laminating pouches of our company. Puch of other speCiication or derective pouches may get caught in the laminator
- It is recommended to use a laminating pouch 5-6mm larger than the item to be laminated. Ihappropriate sized pouches will affect the lamination effect negatively. f there is no pouch with the right size, a larger pouch may also be used. Please place the item within pouches centered as shown in Figure A below and trim it after lamination.
Items to be laminated:
Lamination is conducted through heating and pressurization. The laminating
pouch might be rolled up into the machine due to incorrect operation.
Therefore, please do not laminate the following items:
- Infiammable and heat sensitive materials (e.g. plastic bags, etc)
- Important and unique documents.
- Items with a thickness of more than 0.5mm (inclusive of the laminating pouch).
- Items that will discolor or deteriorate after heating, such as heat-sensitive paper and the paper with patterns drawn with cravons.
Laminating Guide
Please DO Not operate as below
- Place the open end of the pouch into the machine.
- Place the pouch into the machine at an angle.
- Put the item to be laminated into an inappropriate sized pouch, and leave too much space arOund your contents
- The original items to be laminated are undulating or curled.
- Two consecutive pouches are connected together
- Cut the pouch before use.
- Use deformed laminating p
- The length of the item to be laminated is less than 65mm.
Product Diagram
Maintenance
-
Cleaning rubber roller: after long-term use of the machine, molten plastic residue will be stuck on the rubber roller, which WIl easily cause the laminating pouch to get stuck in the machine. In addition, the plastic residue will be dificult to remove once solidified, so please remove it carefully.
Cleaning steps: please feed medium-thick sheets (such as calendar paper or catalog paper) through the machine without being centered in a pouch, and use hot lamination to laminate it several times. -
Cleaning of the laminator: Please unplug the machine before cleaning, and gently wipe with a soft cloth slightly damped with water. Do not use solvents such gasoline, alcohol or diluent. Never use metal brush, tool brush or shovel to tap the rubber roller, so as to avoid scratching it.
-
Please protect your laminator from dirt with an appropriate dust cover, when it’s not in use for an extended period of time.
Packing List
Technical Parameters
WARRANTY CARD
Thank you for your purchase of our products. The interests of customers who
purchase our products will be protected. For any malfunction due to product
quality problems. please contact authorized local dealers or service centers
with this receipt and the warranty card.
Warranty terms:
- For product failures occur under normdl operating circumstances, free of charge repar and spare parts replacement service shall be provided by our company within one year commencing from date of purchase.
- Customers are required to present this warranty card and the original purchase invoice to our company upon request for warranty service. This warranty card shall be valid only after the following form is filled out in details and afixed with official seal of the dealer.
- No free of charge repair service shall be provided in the event of any of the following circumstances:
- Expiration of the warranty period;
- Damages caused by improper use, maintenance or storage not in accordance with the requirements of the user manual;
- Failure or damage resulting from unauthorized disassembly, repair or modification;
- Failure or damage caused by force majeure,
- Wear parts or accessories.
This warranty card is being delivered with the product, one card for one
product. Please keep this warranty card in proper condition for free warranty
service. There is no replacement if lost.
DELI GROUP CO., LTD.
301 Xuxiake Ave. Ninghai County
Ningbo 315600 China Made in China
info@nbdeli.com
www.deliworld.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>