JLAB Go Sports Plus Sport True Wireless Earbuds Instruction Manual

: September 29, 2024
: JLab

Table of Contents

JLAB Go Sports Plus Sport True Wireless Earbuds
BLUETOOTH PAIRING
TROUBLESHOOTING
Documents / Resources

JLAB Go Sports Plus Sport True Wireless Earbuds

We love that you are rocking JLab! We take pride in our products and fully stand behind them.

YOUR WARRANTY
All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

CONTACT US
Reach out to us at support@jlab.com or visit jlab.com/contact

REGISTER TODAY
jlab.com/register
Product updates | How-to tips FAQs & more.

BLUETOOTH PAIRING

Take earbuds out of case and remove stickers. Place back in case and close door.
Red light on case indicates charge. Remove earbuds from case.
One earbud will blink blue/white indicating ready to pair to your device.
Select “JLab GO Sport+” in your device’s Bluetooth settings to connect. Voice prompt “Bluetooth connected” followed by blinking white lights will indicate you are connected.

ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from new device. Take earbuds out of the case. Earbuds will automatically enter Bluetooth Pairing. Select “JLab GO Sport+” in device settings to connect.

BUTTON FUNCTIONS

CUSTOM EQ3 SOUND MODES
Tap either the right or left earbud 3 times for different EQ settings (GO Sport+ will cycle 4 EQ settings).

CHARGING EARBUDS

Earbuds will power off when placed in the case and start charging.
Earbuds will auto power on and connect to your device when removed.

CHARGING CASE
Connect the GO Sport+ into a computer or USB-C 5V 1A (or less) output device.

FITTING

QUICK TIPS

The left or right earbud can be used independently for music and phone calls. Simply choose one and take out of the case to connect.
Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on chosen device to connect.

WARNING : Fully dry off the earbuds before putting in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant but the case is not.

TROUBLESHOOTING

Connection failure or earbuds disconnected from each other (Manual Reset)

Keep the earbuds in the charging case and forget “JLab GO Sport+” from your Bluetooth device settings.
Quick tap 7x on one earbud in charging case. Earbud blinks blue 4 times.
Quick tap 7x on other earbud in charging case. Earbud blinks blue 4 times.
Take both earbuds out of the charging case.
One earbud will be solid white and other will blink blue/white indicating ready to pair to your device.

Instructional videos at: JLAB.COM/SUPPORT/GOSPORTPLUS

CAUTIONS

Avoid extreme heat, cold, and humidity.
Avoid dropping or crushing the earbuds.
Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
If you experience regular discomfort while using this product, discontinue use and consult your physician.
We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products | Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool JLAB.COM

Documents / Resources

| JLAB Go Sports Plus Sport True Wireless Earbuds [pdf] Instruction Manual
Go Sports Plus Sport True Wireless Earbuds, Go Sports Plus, Sport True Wireless Earbuds, True Wireless Earbuds, Wireless Earbuds, Earbuds
---|---