PANTHER SERIES Led bar Purelux Panther Aero Instructions
- September 30, 2024
- PURELUX
Table of Contents
PANTHER SERIES Led bar Purelux Panther Aero
ASSEMBLY PICTURE
Caution!
Read all the instructions provided before installation
- Disconnect the ground connection from the battery to avoid accidental short circuits before connecting electrical wires. If mounting requires drilling holes, make sure to avoid damaging any vital components of the vehicle
- Only operate under the specified voltages (DC 9-36V)
- Do not touch the lamp or the casing for at least 30 minutes after turning the light off to avoid heat injury. Keep the heat-sink clean and exposed to maintain air flow
- Do not stare directly into the light to avoid eye injury
- Use only soap and water for cleaning. Do not use pressure washer for cleaning
- Dispose the unit through your local recycling authorities
- Additional technical information for each model is available through www.valostore.com
INSTALLATION INSTRUCTION
Wiring, mounting and aligning
- Ensure that the working voltage is correct and choose the corresponding relays (DC12V/24V)
- Connect the unit using a Purelux-wiring harness (sold separately)
- Change the light power modes by pressing the button on the side of the lamp. Make sure to select the corresponding light mode for off-road or road traffic use. Off-road mode is significantly brighter.
- Remove any protective films from the lamp before operating
- Turn on the light to test the connection. If the light is not working as expected, please refer the instructions
Install the necessary brackets to the light (side or bottom mount) and install the light to the vehicle. Secure the fastening!
Wire description
- DT/DTP: Driving light connection / S300 & S540
- Red: Power (+) / S800 & S1050
- Black: Grounding (-) / S800 & S1050
- White: Position light (White)
- Yellow: Position light (Amber)
Warranty
The product comes with a 24 months functional warranty from the date of purchase covering material and manufacturing defects or for devices that have malfunctioned under normal use. The warranty does not cover damaged products if the user has acted contrary to the instructions or if structural changes have been made to the product.
Read User Manual Online (PDF format)
Loading......